Manual Bose Wave Music System 3CD

The Bose Wave Music System 3CD is a premium all-in-one audio system featuring a 3-disc CD changer, AM/FM tuner, and Bose waveguide speaker technology for room-filling sound. It includes a remote control, auxiliary input for external devices, clock/alarm functions, and preset station memory. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs & Media 8. Clock & Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker enclosure, 3-disc CD changer, AM/FM tuner, Remote Control, Auxiliary input jack, Headphone jack, Power connector.

Feature	Description
3-Disc CD Changer	Load and play up to three CDs sequentially or at random
AM/FM Tuner	With 6 AM and 6 FM preset memory stations
Waveguide Speaker Technology	Produces full, natural sound from a compact system
Auxiliary Input	For connecting MP3 players, smartphones, or other audio sources
Headphone Jack	For private listening (3.5mm)
Clock & Dual Alarms	Digital clock with two independent alarm settings
Remote Control	Full-function remote for all operations
POWER	Turns system on/off; also enters standby mode
EJECT	Ejects selected CD from the changer
ALARM SET	Accesses clock and alarm setup menu

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

Connect Power: Plug the AC power cord into a 120V outlet.
Connect Antenna: Attach the supplied AM loop antenna and FM wire antenna to their respective terminals on the back.
Connect Auxiliary Device (Optional): Use a 3.5mm audio cable to connect a device to the AUX IN jack.
Insert Batteries in Remote: Install two AAA batteries in the remote control.

WARNING! Do not place the system in enclosed cabinets or near heat vents, as this may cause overheating.

First-Time Setup

Plug in the system; the display will light up.

Set the Clock: Press and hold the ALARM SET button, then use the TUNE/TIME SET buttons to set the correct time.
Tune Radio Stations: Press the RADIO button. Use TUNE or SCAN to find a station, then press and hold a numbered PRESET button (1-6) to save it.
Load CDs: Press the LOAD button for the desired disc slot (DISC 1, 2, or 3). Insert a CD when the indicator light flashes.
Adjust Sound: Use the BASS and TREBLE controls on the remote or top panel to suit your preference.

CAUTION! Handle CDs by the edges to avoid fingerprints and scratches.

Specifications

Audio System: Bose waveguide speaker technology.
CD Player: 3-disc changer, supports CD, CD-R, CD-RW.
Tuner: AM/FM with 12 total presets (6 AM, 6 FM).
Terminals: Auxiliary input (3.5mm), headphone jack (3.5mm), AM/FM antenna terminals, AC power input.
Playback Features: Random/Repeat play, program play, intro scan.
Clock & Alarm: Digital display, dual alarms (wake to radio, CD, or buzzer).
Power Source: 120V AC, 60Hz.
Dimensions: Compact design suitable for shelves or desktops.

Controls and Settings

Front Panel: POWER, EJECT, ALARM SET, DISC SELECT (1,2,3), LOAD. Display: Shows time, track info, radio frequency, alarm status.

Remote: POWER, Numeric buttons (0-9, PRESETS), OPEN/CLOSE (EJECT), CD, RADIO, AUX, VOLUME, MUTE, PLAY/PAUSE, SKIP, BASS, TREBLE, ALARM SET.

Sound Settings: BASS and TREBLE adjustment (via remote or buttons). Radio: Manual TUNE, SCAN, PRESET memory. CD: PLAY MODE (Random, Repeat, Program, Intro). Clock/Alarm: Set time, alarm 1 & 2 source (Radio, CD, Buzzer) and volume.

Connecting Devices

Auxiliary Input: Connect portable music players, computers, or TVs using a 3.5mm audio cable. Headphones: Plug into front panel jack for private listening.

Ensure the system and external device are powered off.
Connect one end of the audio cable to the device's headphone/line-out jack.
Connect the other end to the AUX IN jack on the back of the Wave system.
Press the AUX button on the remote or front panel to select the auxiliary input.

Tip: For best audio quality, set the external device's volume to about 75% and use the Wave system's volume control.

Playing CDs & Media

Supports Audio CDs, CD-R, and CD-RW discs.

Load Discs: Press LOAD for an empty slot, insert CD when light flashes.
Play: Press the CD button, then select a disc (1, 2, or 3). Press PLAY.
Skip Tracks: Use SKIP (NEXT/PREV) buttons.
Play Modes: Press PLAY MODE to cycle through Normal, Random (shuffle), Repeat One, Repeat All, or Program play.
Eject: Press EJECT for the specific disc slot, or press and hold EJECT to eject all discs.
Intro Scan: Press INTRO SCAN to play the first 10 seconds of each track.
Program Play: In STOP mode, press PROGRAM, then use number buttons to select tracks in your desired order.

WARNING! Do not move the system while a disc is playing. Do not insert damaged or irregularly shaped discs.

Clock & Alarm Features

Dual Alarms: Set two independent wake-up times. Wake to Radio, CD, or Buzzer. Snooze: Press any button (except POWER) during alarm to snooze for 9 minutes.

Set Time: Hold ALARM SET, adjust time with TUNE/TIME SET buttons.
Set Alarm 1: Press ALARM SET once, select source (RADIO, CD, BUZZER) and volume, set time.
Set Alarm 2: Press ALARM SET twice, repeat setup process.
Enable/Disable: Press the ALARM 1 or ALARM 2 button on the remote to turn each alarm ON/OFF.

Care & Cleaning

Unplug the system before cleaning. Use a soft, dry cloth to wipe the cabinet and display. For stubborn marks, dampen cloth slightly with water. Do not use solvents or abrasive cleaners.

CAUTION! Never spray liquids directly onto the unit. Keep CDs clean and free of scratches.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and the Bose waveguide are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into outlet and system.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure clear path to system's IR sensor.
CD won't play	Disc dirty/wrong format	Clean disc; ensure it is a standard Audio CD, CD-R, or CD-RW.
Poor radio reception	Antenna placement	Extend FM wire antenna fully; reposition AM loop antenna.
No sound from AUX	Input selection/cable	Press AUX button; check cable connections at both ends.
Alarm does not sound	Alarm disabled/source	Check if alarm is ON and the selected source (CD/Radio) is ready.

Reset: Unplug the system for 60 seconds, then plug back in to reset microprocessor.

Service: 1-800-999-2673; www.bose.com