CX-5 Bose Manual

The CX-5 Bose audio system is a premium sound system designed specifically for the Mazda CX-5, featuring Bose Centerpoint 2 technology, AudioPilot 2 noise compensation, custom-tuned speakers, and advanced equalization. Below are key sections for system overview, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Bose amplifier, custom door speakers, center speaker, subwoofer, AudioPilot 2, Centerpoint 2 surround sound.

Feature	Description
Bose Centerpoint 2	Creates surround sound from stereo sources
AudioPilot 2	Automatically adjusts volume based on road noise
Custom-tuned speakers	10 speakers strategically placed throughout cabin
Bose amplifier	12-channel digital amplifier with 355 watts total power
Subwoofer	Compact subwoofer in spare tire area for deep bass
Centerpoint button	Activates surround sound mode
AudioPilot button	Turns noise compensation on/off
Bass/Mid/Treble controls	Adjusts equalization settings
Fader/Balance controls	Adjusts sound distribution
Source selection	Radio, Bluetooth, USB, AUX input

System Components

Unpack and inspect all components before installation.

1. Bose amplifier: Mounts in rear cargo area, connects to vehicle harness.
2. Door speakers: 6.5-inch woofers in front doors, 3-inch tweeters in A-pillars.
3. Rear speakers: 6.5-inch full-range speakers in rear doors.
4. Center speaker: 2.5-inch speaker in dashboard center.
5. Subwoofer: 8-inch subwoofer mounted in spare tire well.

WARNING! System components are heavy; lift with care to avoid injury. Ensure all connections are secure.

Installation Guidelines

Professional installation recommended for optimal performance.

1. Disconnect vehicle battery before beginning installation.
2. Mount amplifier in designated location using provided brackets.
3. Connect amplifier to vehicle audio harness using supplied connectors.
4. Replace factory speakers with Bose speakers using included mounting hardware.
5. Install subwoofer in spare tire area, ensuring proper clearance.
6. Reconnect battery and test system functionality.

CAUTION! Ensure stable mounting surfaces; use proper tools for installation.

Specifications

• Total Power: 355 watts RMS
• Amplifier Channels: 12-channel digital
• Speaker Configuration: 10 speakers total
• Frequency Response: 35Hz - 20kHz
• Input Sources: AM/FM radio, Bluetooth, USB, AUX
• Audio Formats: MP3, WMA, AAC, WAV
• Power Requirements: 12V DC vehicle electrical system
• Operating Temperature: -20°C to 70°C (-4°F to 158°F)
• System Weight: 15.4 lbs (7 kg) total

Controls and Settings

Access audio settings via vehicle infotainment system or steering wheel controls.

Infotainment Controls: SOURCE, VOLUME, TRACK, MENU, AUDIO SETTINGS

Audio Settings: BASS, MIDRANGE, TREBLE, FADER, BALANCE, Centerpoint (On/Off), AudioPilot (On/Off). Sound Profiles: DRIVER, ALL SEATS, REAR SEATS. Source Settings: Bluetooth pairing, USB device recognition, AUX input level. System: Factory reset, software updates.

Connecting Audio Sources

Bluetooth: Pair mobile devices for wireless audio streaming. USB: Connect devices for direct playback and charging. AUX: 3.5mm input for external audio devices.

1. Turn on vehicle ignition to power audio system.
2. Select SOURCE on infotainment system.
3. Choose Bluetooth, USB, or AUX input.
4. For Bluetooth: Enable pairing on device, select "Bose Audio" from available devices.
5. For USB: Insert USB device into center console port.
6. For AUX: Connect 3.5mm cable from device to AUX input.

Tip: Ensure Bluetooth device is within 3 feet (1 meter) for initial pairing.

Advanced Audio Modes

Centerpoint 2: Creates virtual surround sound from stereo sources.

1. Press Centerpoint button on audio settings screen.
2. Choose between OFF, LOW, MEDIUM, HIGH settings.
3. Adjust to preference based on music type.

AudioPilot 2: Automatically adjusts volume based on road noise.

1. Press AudioPilot button to enable/disable.
2. System continuously monitors cabin noise levels.
3. Automatically adjusts volume to maintain consistent listening level.

Sound Profiles: DRIVER (optimized for driver position), ALL SEATS (balanced for all occupants), REAR SEATS (enhanced rear seat audio).

System Calibration

Automatic calibration occurs during initial setup. Manual calibration available in service mode.

1. Enter service mode: Hold AUDIO and SETUP buttons for 5 seconds.
2. Select CALIBRATION from service menu.
3. Follow on-screen prompts for microphone placement.
4. System will play test tones and adjust equalization automatically.
5. Save calibration settings when complete.

Note: Professional calibration recommended for optimal results.

Care & Maintenance

Clean speaker grilles with soft, dry cloth only. Do not use liquids or cleaning agents.

CAUTION! Do not spray liquids on speakers or amplifier. Keep system components dry and free from moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 Bose Corporation; trademarks of Bose Corporation. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. For support, visit www.bose.com/automotive or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Amplifier power/connections	Check amplifier power connection; ensure harness is properly seated.
Distorted audio	Source quality/volume level	Reduce volume; check source audio quality; adjust equalization settings.
Bluetooth not connecting	Pairing/device compatibility	Delete old pairing; restart both devices; ensure device compatibility.
USB not recognized	Format/compatibility	Use FAT32 formatted USB; check file format compatibility; try different USB device.
Uneven sound distribution	Fader/balance settings	Adjust fader and balance controls; check speaker connections.
No bass response	Subwoofer connection/settings	Check subwoofer power and signal connections; adjust bass settings.

Reset: Hold AUDIO and BACK buttons for 10 seconds to reset audio settings to factory defaults.

Service: 1-800-999-2673; www.bose.com/automotive