Bose Zeppelin Air Manual

The Bose Zeppelin Air is a premium wireless speaker system designed for high-quality audio streaming via AirPlay, Bluetooth, and auxiliary inputs. It features a sleek, elliptical design with proprietary Bose technologies for immersive sound, built-in amplification, and intuitive controls. Below are key sections for setup, features, operation, connectivity, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Technical Specifications 5. Controls and Indicators 6. Wireless Connectivity 7. Audio Playback 8. Advanced Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Elliptical speaker enclosure, Remote Control, Power cord, Auxiliary input, Status LED, Control buttons.

Feature	Description
AirPlay Support	Wireless audio streaming from Apple devices
Bluetooth Connectivity	For streaming from compatible smartphones, tablets, and computers
Auxiliary Input	3.5mm jack for wired audio connection
Proprietary Drivers	Dual mid-range drivers and a central high-excursion woofer
Built-in Amplification	Custom-tuned digital amplification for each driver
Status LED	Indicates power, connectivity, and mode status
Remote Control	For power, volume, source selection, and playback control
Power Button	Turns system on/off
Source Button	Cycles between AirPlay, Bluetooth, and Auxiliary inputs
Volume Controls	Adjusts audio output level

Unpacking and Setup

Unpack and inspect contents. Place on stable, level surface.

Position the speaker: Ensure adequate ventilation and away from heat sources.
Connect power: Plug the power cord into the rear port and into a wall outlet.
Connect optional sources: Use the auxiliary input for wired devices.
Power on: Press the Power button on the unit or remote.

WARNING! The Zeppelin Air is heavy; use care when lifting. Ensure the power outlet is easily accessible.

First-Time Configuration

Power on the system; the status LED will indicate readiness.

Select source: Press SOURCE button to choose AirPlay, Bluetooth, or AUX.
For AirPlay: On your iOS device, select Zeppelin Air from AirPlay options.
For Bluetooth: Enable pairing mode (LED blinks blue), then pair from your device.
Adjust volume: Use remote or volume buttons to set initial level.

CAUTION! Place on a stable surface; avoid blocking vents or ports.

Technical Specifications

Dimensions: Approximately 26 inches wide.
Audio Technology: Proprietary Bose acoustic design.
Connectivity: AirPlay, Bluetooth, 3.5mm auxiliary input.
Amplification: Integrated digital amplifiers.
Drivers: Two mid-range, one woofer.
Power Requirements: 100-240V AC, 50/60Hz.
Operating Temperature: Standard indoor environment.
Remote Control: Infrared, requires line-of-sight.

Controls and Indicators

Front panel: Power button, Source button, Status LED. Remote: Power, Volume, Mute, Source, Play/Pause, Skip.

Status LED Colors: Solid white (power on), blinking blue (Bluetooth pairing), solid green (AirPlay connected), amber (auxiliary mode).

Volume: Adjust via remote or buttons. Mute: Press MUTE to silence audio. Source Selection: Cycle through AirPlay, Bluetooth, AUX. Playback Control: Play, Pause, Skip forward/backward (remote only).

Wireless Connectivity

AirPlay: Requires iOS device on same Wi-Fi network. Bluetooth: Pair with compatible devices.

Ensure Zeppelin Air is powered on and in standby.
For AirPlay: Select speaker from AirPlay menu on iOS device.
For Bluetooth: Press SOURCE until LED blinks blue, then pair from device.
For AUX: Connect cable to 3.5mm jack and select AUX mode.

Tip: For best AirPlay performance, ensure a strong Wi-Fi signal.

Audio Playback

Supports streaming from AirPlay, Bluetooth, and wired auxiliary sources.

Select source: Use SOURCE button or remote.
Play audio: Start playback on your connected device.
Control playback: Use remote for play, pause, skip.
Adjust volume: Use volume buttons on remote or unit.
Mute: Press MUTE to temporarily silence audio.

WARNING! Do not expose to liquids. Keep vents clear for proper cooling.

Advanced Settings

No user-serviceable parts inside. Factory reset: Hold Power button for 10 seconds (if supported). Remote battery replacement: Open compartment, install two AAA batteries.

Care & Maintenance

Unplug before cleaning. Use a soft, dry cloth; do not use liquids or abrasive cleaners.

CAUTION! Avoid moisture and extreme temperatures. Do not open the enclosure.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is securely plugged into outlet and unit.
No sound	Volume low/muted, wrong source	Increase volume, unmute, verify correct source is selected.
AirPlay not connecting	Network issues	Ensure iOS device and Zeppelin Air are on same Wi-Fi network.
Bluetooth pairing fails	Distance/interference	Move device closer, ensure pairing mode is active.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure line-of-sight to unit.

Reset: Unplug power for 60 seconds, then reconnect.

Service: Contact Bose Customer Support or visit www.bose.com.