Bose Wave Sound System Manual

The Bose Wave Sound System is a premium audio system featuring advanced waveguide speaker technology, CD player, AM/FM tuner, auxiliary input, remote control, and intuitive controls. Designed for high-quality sound reproduction in a compact form factor. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, Remote Control, Auxiliary input, Headphone jack, Power cord.

Feature	Description
Waveguide Speaker Technology	Produces full, room-filling sound from compact enclosure
CD Player	Plays audio CDs and CD-R/RW discs
AM/FM Tuner	Preset memory for radio stations
Auxiliary Input	For connecting external audio sources (MP3 players, etc.)
Headphone Jack	For private listening
Remote Control	Full-function remote for all operations
Clock & Alarm	Built-in clock with alarm function
Display	Backlit LCD for track/time/station information
Bass & Treble Controls	Adjustable sound settings
Power	AC power operation

Installation

Unpack and inspect contents. Place on stable, level surface.

Position system: Place on shelf or table away from heat sources and moisture.
Connect power: Plug power cord into AC outlet.
Connect antenna: Attach AM loop antenna and FM wire antenna.
Connect auxiliary devices: Use 3.5mm audio cable to connect external sources to AUX input.

WARNING! Do not place near heat vents or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on system; follow initial setup procedure.

Set clock: Press and hold CLOCK button, use number keys to set time.
Program radio stations: Tune to desired station, press and hold preset button (1-6) to store.
Adjust sound settings: Use BASS and TREBLE controls to customize sound.
Set alarm: Press ALARM button to configure wake-to-CD or wake-to-radio.

CAUTION! Use only recommended power source. Do not overload electrical outlets.

Specifications

Audio Output: Proprietary waveguide technology
CD Compatibility: Audio CD, CD-R, CD-RW
Tuner: AM/FM with 6 station presets each
Inputs: Auxiliary (3.5mm), Headphone (3.5mm)
Display: Backlit LCD with dimmer control
Remote Control: Infrared, requires 2 AAA batteries
Power Requirements: 120V AC, 60Hz
Dimensions: Compact design suitable for shelves
Weight: Approximately 10.5 lbs (4.8 kg)

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, PLAY/PAUSE, STOP, TUNER/BAND, PRESET buttons, VOLUME, BASS, TREBLE.

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, SKIP), TUNER, PRESET, VOLUME, MUTE, CLOCK, ALARM, DISPLAY.

Sound Settings: BASS (+/-), TREBLE (+/-), Loudness compensation. Radio: Manual tuning, Auto-scan, Preset memory. Clock: 12/24 hour format, Alarm settings (CD or radio source). Display: Backlight brightness, Information display mode.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack for external audio sources.

Turn off system before connecting devices.
Connect audio cable from device's headphone/output jack to AUX input.
Select AUX mode using SOURCE button.
Adjust volume on both system and source device for optimal sound.

Tip: For best sound quality, use high-quality audio cables and ensure connections are secure.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW discs.

Insert disc: Press OPEN/CLOSE, place CD label-side up in tray.
Play: Press PLAY; use SKIP buttons to navigate tracks.
Pause: Press PAUSE to temporarily stop playback.
Stop: Press STOP; press again to return to track 1.
Repeat: Press REPEAT for single track or entire disc repeat.
Random: Press SHUFFLE for random track playback.
Program: Use PROGRAM button to create custom play sequences.
Display: Press DISPLAY to show track time, remaining time, or disc time.

WARNING! Do not use damaged or irregularly shaped CDs. Keep CD lens clean.

Radio Operation

AM/FM tuner with preset memory.

Select band: Press TUNER/BAND to switch between AM and FM.
Tune manually: Use TUNE +/- buttons.
Auto-scan: Press and hold TUNE to scan for stations.
Save presets: Tune to station, press and hold preset button (1-6) until beep.
Recall presets: Press preset button briefly.
FM stereo: Automatic stereo/mono switching based on signal strength.

Note: For best FM reception, fully extend wire antenna and position properly. For AM, rotate loop antenna.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. CD lens cleaner may be used periodically.

CAUTION! Do not use solvents, abrasives, or spray cleaners. Avoid liquid contact with controls and openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; ensure power switch is on.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor; check battery orientation.
CD won't play	Disc/dirty lens	Check disc for damage/cleanliness; try different CD; use lens cleaning disc.
Poor radio reception	Antenna/position	Extend FM antenna fully; reposition AM loop; move system away from interference.
No sound from AUX	Connections/volume	Check cable connections; ensure source device is playing; adjust volumes.
Distorted sound	Source/volume	Reduce volume on source device; check audio cable quality; adjust bass/treble.
Display dim or off	Settings/power	Adjust display brightness; check power saving settings.

Reset: Unplug for 1 minute, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com