Bose Wave Radio Manual

The Bose Wave Radio is a premium tabletop radio system renowned for its high-fidelity sound quality, compact design, and user-friendly features. It combines an AM/FM tuner with advanced acoustic waveguide speaker technology to deliver rich, room-filling audio. Key features include preset stations, clock/alarm functions, auxiliary input for external devices, and a credit card-style remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with integrated waveguide speakers, Credit Card Remote Control, AM/FM tuner, Auxiliary Input jack, Clock display with dimmer, and Preset memory buttons.

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources and moisture.

1. Connect Power: Plug the detachable power cord into the rear of the unit and into a standard 120V AC outlet.
2. Connect Antenna: Extend the AM loop antenna and FM wire antenna for optimal reception.
3. Connect External Device (Optional): Use a 3.5mm audio cable to connect a player to the AUX IN jack.
4. Position Unit: Ensure at least 2 inches of clearance on all sides for proper ventilation and sound projection.

WARNING! Do not place unit on soft surfaces like beds or sofas, as this may block vents and cause overheating.

First-Time Setup

Plug in power; the unit will beep and the display will light up.

1. Set the Clock: Press and hold the CLOCK button, then use TUNE/TIME SET buttons to set correct time.
2. Set Radio Presets: Tune to desired station, press and hold a numbered PRESET button (1-6) until display confirms.
3. Adjust Tone: Use the TONE button to cycle through bass/treble settings (Low, Medium, High).
4. Set Alarm: Press ALARM button to set wake time and choose radio or tone alarm sound.

CAUTION! Use only the provided power cord. Ensure outlet is easily accessible.

Specifications

• Dimensions: Approximately 14.5" W x 5.5" H x 8.5" D.
• Tuner: AM/FM with 6 station presets (3 AM, 3 FM).
• Audio Output: Integrated Acoustic Waveguide speaker system.
• Inputs: Auxiliary Input (3.5mm), optional headphone jack.
• Power Source: 120V AC, 60Hz.
• Remote Control: Credit card-style infrared remote (battery CR2032 included).
• Display: LED with adjustable dimmer.
• Alarm: Dual alarm, wake to radio or tone.
• Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Front Panel: POWER, PRESET (1-6), TUNE/TIME SET, ALARM, CLOCK, TONE, AUX, DISPLAY DIMMER.

Remote: POWER, VOLUME UP/DOWN, PRESET (1-6), ALARM ON/OFF, SLEEP, MUTE.

Radio: TUNE buttons for manual tuning; PRESET for saved stations. Clock: CLOCK button to set time; 12/24 hour format. Alarm: Set wake time, sound source (radio/tone), and volume. Tone: Adjust bass/treble balance. Display: DIMMER button adjusts brightness (High, Low, Off). Aux: Switches input to external audio source.

Connecting Devices

Auxiliary Input: Connect portable music player, smartphone, or tablet using 3.5mm audio cable.

1. Ensure Bose Wave Radio and external device are powered off.
2. Connect one end of cable to device's headphone/line-out jack.
3. Connect other end to AUX IN jack on rear of Bose unit.
4. Power on both devices. Press AUX button on radio to select auxiliary input.
5. Control volume primarily from the Bose unit for best sound quality.

Tip: For optimal audio quality, set the connected device's volume to about 75% and use the Bose volume control for final adjustment.

Radio Operation

Supports AM and FM band reception.

1. Power On: Press POWER button on unit or remote.
2. Select Band: Press AM/FM button to toggle between AM and FM.
3. Tune Station: Use TUNE buttons to manually scan. For precise tuning, press and hold.
4. Use Presets: Press a numbered PRESET button (1-6) to recall saved station.
5. Save a Preset: Tune to desired station, press and hold a PRESET button until display flashes.
6. Adjust Volume: Use VOLUME buttons on remote or rotate volume knob on unit (if applicable).
7. Mute: Press MUTE on remote to silence audio; press again or adjust volume to unmute.
8. Sleep Timer: Press SLEEP on remote to set shut-off timer (10 to 90 minutes).

WARNING! Do not insert objects into speaker ports or vents. Keep away from liquids.

Clock and Alarm Features

Clock: Press CLOCK button to enter set mode; use TUNE/TIME SET to adjust. Display shows time when unit is off. Alarm: Press ALARM button to set hour/minute. Choose alarm type (RADIO or TONE). Set alarm volume separately from main volume. Press ALARM ON/OFF on remote to enable/disable. Snooze: Press any button (except POWER) during alarm to snooze for 9 minutes.

Care & Cleaning

Unplug unit before cleaning. Use soft, dry cloth to wipe exterior. For stubborn marks, dampen cloth slightly with water; do not use solvents or abrasives. Clean display gently with microfiber cloth. Keep vents free of dust.

CAUTION! Never spray liquids directly onto unit. Do not immerse in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. This device may not cause harmful interference and must accept any interference received. Copyright and trademarks owned by Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Reset: Unplug unit for 60 seconds, then plug back in to reset microprocessor.

Service: 1-800-999-2673; www.bose.com