Bose Wave Radio Model AWRC-1G Manual

The Bose Wave Radio Model AWRC-1G is a premium tabletop radio system featuring advanced waveguide speaker technology for rich, room-filling sound. It includes AM/FM tuner with 6 preset stations, CD player, auxiliary input, clock with dual alarm functions, and remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Clock and Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, Clock display, Remote Control, Auxiliary input jack, Headphone jack.

FeatureDescription
Waveguide Speaker TechnologyDelivers full, natural sound from compact enclosure
AM/FM TunerWith 6 station presets (3 AM, 3 FM)
CD PlayerPlays audio CDs and CD-R/RW discs
Auxiliary Input JackFor connecting external audio sources (e.g., MP3 player)
Headphone JackFor private listening
Dual Alarm ClockTwo separate alarm settings with radio or buzzer options
Remote ControlFull-function remote for all major operations
Sleep TimerAutomatically turns off audio after set time
Power SourceAC power adapter with battery backup for clock
Display DimmerAdjusts brightness of clock display

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug AC adapter into power outlet and DC plug into radio.
  2. Install backup batteries: Insert 2 AA batteries (not included) for clock memory.
  3. Connect antenna: Extend FM wire antenna; position AM loop antenna for best reception.
  4. Position unit: Ensure at least 4 inches clearance on all sides for proper ventilation.

WARNING! Do not place near heat sources or in direct sunlight. Use only Bose-approved power adapter.

First-Time Setup

Connect power; unit will enter standby mode with clock display.

  1. Set time: Press and hold CLOCK button, use HOUR and MINUTE buttons to set time.
  2. Set alarms: Press ALARM 1 or ALARM 2 button, set time and choose radio or buzzer sound.
  3. Program radio presets: Tune to desired station, press and hold preset button (1-6) for 2 seconds.
  4. Adjust sound: Use BASS and TREBLE controls to customize audio to your preference.

CAUTION! Ensure proper ventilation around unit. Do not block ventilation openings.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, TUNER/BAND, ALARM 1, ALARM 2, CLOCK, PRESET buttons, VOLUME, BASS, TREBLE.

Remote: POWER, NUMBER buttons (0-9), CD controls (PLAY, STOP, PAUSE, SKIP), TUNER/BAND, PRESET, VOLUME, MUTE, SLEEP, DISPLAY DIMMER.

Clock Settings: Time format (12/24 hour), alarm settings (radio/buzzer, volume, duration). Radio: Manual tuning, preset selection, band selection. Audio: BASS (-10 to +10), TREBLE (-10 to +10), balance control. CD: Repeat, random play, intro scan. System: Display brightness, button beep on/off.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack for external audio sources. Headphone: 3.5mm stereo jack.

  1. Turn off or pause audio before connecting devices.
  2. Connect external device (e.g., MP3 player) to AUX IN jack using 3.5mm cable.
  3. Press AUX button to select auxiliary input mode.
  4. Adjust volume on both radio and external device for optimal level.

Tip: For best audio quality, use high-quality cables and keep them away from power cords.

Playing CD Media

Supports audio CDs, CD-R, and CD-RW discs.

  1. Insert disc: Press CD OPEN/CLOSE, place disc label-side up in tray, press again to close.
  2. Play: Press PLAY; unit will read disc and begin playback.
  3. Skip tracks: Press SKIP FORWARD or SKIP BACKWARD buttons.
  4. Pause: Press PAUSE; press again to resume.
  5. Stop: Press STOP; press PLAY to resume from stopped position.
  6. Repeat: Press REPEAT during playback to repeat current track or entire disc.
  7. Random play: Press RANDOM to play tracks in random order.
  8. Intro scan: Press SCAN to play first 10 seconds of each track.

WARNING! Do not touch laser lens. Keep discs clean and free of scratches. Use only standard circular CDs.

Clock and Alarm Features

Dual Alarm: Set two independent alarms with different times and sources.

  1. Set alarm time: Press ALARM 1 or ALARM 2, use HOUR and MINUTE buttons.
  2. Choose alarm source: Select radio (last station played) or buzzer.
  3. Set alarm volume: Adjust volume while alarm is sounding or in setup.
  4. Enable/disable: Press ALARM ON/OFF button for each alarm.
  5. Snooze: Press SNOOZE button when alarm sounds for 9 more minutes of sleep.
  6. Sleep timer: Press SLEEP to set automatic shut-off (15-90 minutes).

Note: Clock memory maintained by backup batteries during power outages.

Care & Cleaning

Unplug unit before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only.

CAUTION! Do not use solvents, abrasives, or aerosol cleaners. Never spray liquids directly on unit. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. All rights reserved. Bose and Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionCheck AC adapter connection; try different outlet; check backup batteries.
Poor radio receptionAntenna positioningReposition FM wire antenna; rotate AM loop antenna; move unit location.
CD won't playDisc issuesEnsure disc is clean, not scratched; check if disc is compatible; try different CD.
No sound from auxiliaryConnection/input selectionCheck cable connections; ensure AUX mode selected; adjust volume on both devices.
Clock resetsBattery backupReplace backup batteries; ensure proper installation.
Remote not workingBatteries/obstructionsReplace remote batteries; ensure clear path to IR sensor; operate within 20 feet.
Distorted soundSource/volume levelReduce volume; check audio source quality; adjust bass/treble settings.

Reset: Unplug unit for 1 minute, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Wave Radio Model AWRC-1G Manual © - All Rights Reserved 2025