bose wave radio manual model awr1-1w

The Bose Wave Radio Model AWR1-1W is a premium tabletop radio system featuring Bose waveguide speaker technology for enhanced sound quality, AM/FM tuner with preset stations, clock with alarm functions, auxiliary input for external audio sources, and a sleek, compact design. It operates on 120V AC power and includes a remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Radio 8. Clock and Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker enclosure, AM/FM tuner, LCD display, Clock with dual alarms, Auxiliary input, Remote control, Power cord.

Feature	Description
Waveguide speaker technology	Delivers full, room-filling sound from a compact enclosure
AM/FM tuner	With 6 AM and 6 FM station presets
LCD display	Shows time, station frequency, and alarm status
Clock & Alarm	Dual alarms with snooze function
Auxiliary input (3.5mm)	For connecting external audio devices (e.g., MP3 player, smartphone)
Remote control	For full function operation from a distance
POWER button	Turns radio on/off; also used for setting functions
TUNE/ALARM SET knob	For tuning stations and setting time/alarms
PRESET buttons	For selecting and storing favorite stations
VOLUME knob	Adjusts audio output level

Installation

Unpack and inspect contents. Place on a stable, level surface away from heat sources and moisture.

Connect power: Plug the AC power cord into a standard 120V wall outlet.
Extend antenna: For best FM reception, fully extend the wire antenna. For AM, position the radio for best reception.
Placement: For optimal sound, allow at least 4 inches of clearance on all sides of the radio.
Insert batteries into remote: Open battery compartment and install two AAA batteries.

WARNING! Do not place near bathtubs, sinks, or other wet areas. Use only the provided power cord.

First-Time Setup

Plug in the radio; the display will light up. Initial setup involves setting the clock and tuning stations.

Set the clock: Press and hold the CLOCK button, then turn the TUNE/ALARM SET knob to set the correct time. Release the CLOCK button.
Tune stations manually: Press the BAND button to select AM or FM. Turn the TUNE/ALARM SET knob to find a station.
Save station presets: Tune to a desired station. Press and hold a numbered PRESET button (1-6) until the display confirms.
Set alarms: Press the ALARM 1 or ALARM 2 button, then use the TUNE/ALARM SET knob to set the alarm time. Press the button again to select alarm source (Radio or Buzzer).

CAUTION! Ensure the radio is placed on a stable surface to prevent accidental falls.

Specifications

Model: AWR1-1W
Audio Technology: Proprietary Bose waveguide
Tuner: AM/FM with 12 total presets (6 AM, 6 FM)
Display: Backlit LCD
Clock: 12/24 hour format with dual alarms and snooze
Inputs: 3.5mm auxiliary input jack
Power Source: 120V AC, 60Hz
Remote Control: Infrared, requires 2 x AAA batteries (included)
Dimensions: Compact tabletop design

Controls and Settings

Front Panel: POWER button, TUNE/ALARM SET knob, VOLUME knob, BAND button, PRESET buttons (1-6), CLOCK button, ALARM 1/2 buttons, SNOOZE button.

Remote: POWER, VOLUME UP/DOWN, MUTE, PRESET (1-6), BAND, TUNE UP/DOWN, CLOCK, ALARM 1/2, SNOOZE, AUX.

Settings: Clock set, Alarm set (Radio/Buzzer), Station tuning and presets, Snooze duration (default 9 minutes).

Connecting Devices

Auxiliary Input: Connect an external audio device (like an MP3 player or smartphone) using a standard 3.5mm audio cable.

Ensure the radio and external device are powered off.
Plug one end of the audio cable into the headphone/line-out jack of your device.
Plug the other end into the AUX IN jack on the back of the radio.
Turn on the radio and press the AUX button on the remote or front panel to select the auxiliary input.
Start playback on your external device and adjust volume using the radio's VOLUME knob.

Tip: For best audio quality, set your external device's volume to about 75% and use the radio's knob for final volume adjustment.

Using the Radio

Power on: Press the POWER button on the radio or remote.
Select band: Press the BAND button to toggle between AM and FM.
Tune stations: Use the TUNE/ALARM SET knob or the TUNE UP/DOWN buttons on the remote.
Select a preset: Press one of the numbered PRESET buttons (1-6) for your saved station.
Adjust volume: Turn the VOLUME knob or use the VOLUME UP/DOWN buttons on the remote.
Mute: Press the MUTE button on the remote to temporarily silence audio. Press again to restore.
Switch to Auxiliary mode: Press the AUX button to listen to your connected external device.

WARNING! Do not insert objects into the speaker ports or vents.

Clock and Alarm Functions

Setting the Clock: Press and hold CLOCK, turn TUNE/ALARM SET knob to adjust time, release CLOCK.

Setting Alarms:
1. Press ALARM 1 or ALARM 2. The corresponding alarm icon will flash.
2. Turn the TUNE/ALARM SET knob to set the desired alarm time.
3. Press the same ALARM button again to cycle through alarm sources: Radio (plays last station) -> Buzzer (beep tone) -> Off.
4. The alarm icon will remain lit when an alarm is set and active.

Snooze: When an alarm sounds, press the SNOOZE button or any button on the remote to silence it for 9 minutes. The alarm will repeat until turned off.

Turning Off an Alarm: Press the corresponding ALARM 1 or ALARM 2 button while the alarm is sounding to turn it off completely.

Care & Cleaning

Unplug the radio from the power outlet before cleaning. Use a soft, dry cloth to wipe the cabinet and display. For stubborn marks, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or sprays directly on the unit.

CAUTION! Never allow liquid to enter the vents or openings. Do not submerge any part of the radio.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Bose Corporation. Bose and the Bose waveguide are registered trademarks of Bose Corporation. For customer service in the USA and Canada, contact Bose Corporation at 1-800-999-2673 or visit www.bose.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / Display is off	Power cord not connected	Ensure the power cord is firmly plugged into the radio and the wall outlet.
Poor FM reception	Antenna not extended	Fully extend the wire FM antenna and reposition the radio.
Remote doesn't work	Batteries/Obstruction	Replace remote batteries. Ensure nothing is blocking the IR sensor on the radio.
No sound from Aux input	Incorrect input selected	Press the AUX button to select auxiliary input mode. Check cable connections.
Alarm does not sound	Alarm not set or volume low	Verify alarm is set (icon lit). If alarm source is Radio, ensure volume is at an audible level.
Distorted sound	Overdriven input	If using Aux input, reduce the volume output level on your external device.

Reset: Unplug the radio from power for 60 seconds, then plug it back in to reset the microprocessor.

Service: For technical support, contact Bose Customer Service: 1-800-999-2673 or www.bose.com.