bose wave radio manual military time

The Bose Wave Radio is a premium audio system featuring advanced waveguide speaker technology, AM/FM radio tuner, and support for various audio inputs. This manual covers operation in military (24-hour) time format, including setup, features, controls, and troubleshooting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Clock & Alarm 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker technology, AM/FM tuner, LCD display with military time, Remote Control, Auxiliary input, Headphone jack, Clock/Alarm system.

FeatureDescription
Waveguide Speaker TechnologyDelivers full, spatial sound from a compact enclosure
AM/FM TunerPreset memory for 5 AM and 5 FM stations
LCD DisplayShows time in 12-hour or 24-hour (military) format
Remote ControlFull function remote for all operations
Auxiliary Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening
AC Power InputFor main power connection
Clock & Alarm SystemDual alarm capability with adjustable volume
MUTEInstantly mutes audio
POWERTurns system on/off

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug the AC power cord into a standard 120V AC outlet.
  2. Connect antenna: Attach the supplied AM loop antenna and FM wire antenna.
  3. Connect audio sources: Use the auxiliary input for CD players, smartphones, or tablets.
  4. Position the radio: Ensure at least 4 inches of clearance on all sides for proper ventilation.

WARNING! Do not place near water or moisture. Use only the supplied power adapter.

First-Time Setup

Power on the system; follow initial setup prompts on display.

  1. Set time format: Press and hold CLOCK button, select 24-HOUR (military) format.
  2. Set current time: Use HOUR and MINUTE buttons to set to current military time (e.g., 14:30 for 2:30 PM).
  3. Tune radio stations: Use TUNE or PRESET buttons to find and save AM/FM stations.
  4. Configure alarms: Press ALARM button to set alarm time and source (radio or tone).

CAUTION! Ensure proper ventilation; do not block rear ports.

Specifications

Controls and Settings

Access settings via front panel buttons or remote control. Front Panel: POWER, VOLUME, TUNE, PRESET, CLOCK, ALARM, DISPLAY.

Remote: POWER, Numeric buttons, VOLUME, MUTE, PRESET, CLOCK, ALARM, SLEEP, SOURCE.

Audio: Bass, Treble, Loudness compensation. Clock: Time format (12/24 hour), time set, daylight saving. Alarm: Alarm 1/Alarm 2 set, alarm source (Radio/Buzzer), alarm volume. Display: Brightness adjustment, display timeout. Radio: Auto-scan, manual tuning, preset memory.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack for external audio. Headphone Output: Standard 3.5mm jack.

  1. Turn off radio before connecting devices.
  2. Connect 3.5mm cable from device to AUX IN jack on rear.
  3. Press SOURCE button to select "AUX" input.
  4. Adjust volume on both radio and source device.

Tip: Use high-quality audio cables for best sound performance.

Using the Clock & Alarm

Supports 24-hour (military) time format and dual alarms.

  1. Set Time Format: Press and hold CLOCK, use arrows to select "24H".
  2. Set Current Time: Press CLOCK, then HOUR and MINUTE to set (e.g., 18:45 for 6:45 PM).
  3. Set Alarm: Press ALARM 1 or ALARM 2, set time in military format, select source (RADIO or BUZZER).
  4. Adjust Alarm Volume: While alarm is sounding, press VOLUME to set desired level.
  5. Snooze: Press SNOOZE during alarm for 9-minute delay.
  6. Sleep Timer: Press SLEEP to set shut-off timer (15-90 minutes).

WARNING! Power interruption may require resetting time and alarms.

Accessibility Features

Large Display: Clear LCD with adjustable brightness. Tactile Buttons: Raised buttons for easy identification. Audio Guidance: Tone confirmation for button presses.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only.

CAUTION! Do not use abrasive cleaners or solvents. Never spray liquids directly on unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionEnsure power cord is securely plugged in; check outlet.
Poor radio receptionAntenna placementExtend FM wire antenna fully; reposition AM loop antenna.
Clock resetsPower interruptionSet time and alarms again after power restoration.
No sound from AUXInput selection/connectionsEnsure SOURCE is set to AUX; check cable connections.
Alarm doesn't soundSettings/volumeVerify alarm is enabled and volume is not set to minimum.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor on front.

Reset: Unplug unit for 60 seconds, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com/support

Bose Wave Radio Manual © - All Rights Reserved 2025