Bose Wave Radio CD Player Manual

The Bose Wave Radio CD Player is a premium audio system combining an AM/FM radio with a CD player, renowned for its waveguide speaker technology for rich, room-filling sound. It features a clock, dual alarms, preset stations, remote control, auxiliary input, and various audio settings. Powered by AC or optional battery backup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, LCD display, Remote Control, Auxiliary input, Headphone jack, AC power input.

FeatureDescription
Waveguide Speaker TechnologyProduces full, spatial sound from a compact unit
CD PlayerPlays audio CDs, CD-R/RW discs
AM/FM TunerWith 6 AM and 6 FM presets
Clock & Dual AlarmsWake to radio, CD, or buzzer
Remote ControlFull function remote included
Auxiliary Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening
AC Power InputFor main power connection
Battery Backup (Optional)Maintains clock and presets during power outage
Tone ControlsAdjustable bass and treble

Installation

Unpack and inspect contents. Place on a stable, level surface away from heat sources and moisture.

  1. Connect Power: Plug the AC power cord into a standard 120V AC outlet.
  2. Insert Batteries (Optional): For battery backup, install batteries in the compartment.
  3. Connect Antenna: Attach the supplied AM loop antenna and FM wire antenna.
  4. Position Unit: Ensure at least 4 inches of clearance on all sides for proper ventilation and sound dispersion.

WARNING! Do not place unit on soft surfaces like a bed or sofa, as this can block vents and cause overheating.

First-Time Setup

Plug in the unit; the display will light up.

  1. Set the Clock: Press and hold CLOCK button, then use HOUR and MINUTE buttons to set time.
  2. Set Radio Presets: Tune to desired station, press and hold a numbered PRESET button (1-6) to store.
  3. Adjust Tone: Use BASS and TREBLE buttons to set preferred sound.
  4. Set Alarms: Press ALARM 1 or ALARM 2 button, set time and source (Radio, CD, or Buzzer).

CAUTION! Ensure the unit is on a stable surface to prevent tipping or vibration.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, VOLUME, TUNE/TRACK, PRESET, ALARM 1/2, CLOCK, BASS, TREBLE, BAND (AM/FM).

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, PREV/NEXT), VOLUME, MUTE, BAND, PRESET, ALARM, CLOCK, SLEEP.

Audio: Adjust BASS and TREBLE. Clock/Alarm: Set time, alarm time, and source (Radio, CD, Buzzer). Radio: Manual TUNE or scan, store PRESETS. CD: Play, Pause, Stop, Skip, Repeat. System: SLEEP timer (turns unit off after set time).

Connecting Devices

Auxiliary Input: Connect an MP3 player, smartphone, or tablet via 3.5mm audio cable. Headphones: Plug into front panel jack.

  1. Ensure unit is powered on.
  2. Connect cable from device's headphone/output jack to the AUX IN jack on the back of the unit.
  3. Press the FUNCTION or AUX button (if available) or use remote to select AUX input.
  4. Adjust volume on both the Wave system and your external device.

Tip: For best audio quality, set your external device's volume to about 75% and use the Wave system's volume control.

Playing CDs

Supports Audio CDs, CD-R, CD-RW.

  1. Insert disc: Press CD OPEN/CLOSE, place disc label-side up in the tray, press button again to close.
  2. Play: Press PLAY; unit will read TOC and begin playback.
  3. Navigate: Use PREV/NEXT to skip tracks; press and hold to fast forward/rewind.
  4. Pause/Stop: Press PAUSE to temporarily halt; press STOP to stop playback.
  5. Repeat: Press REPEAT during play to repeat current track or all tracks.
  6. Random Play: Press SHUFFLE (if available) to play tracks in random order.
  7. Eject: Press CD OPEN/CLOSE to open tray and remove disc.

WARNING! Do not touch the laser lens. Handle CDs by edges. Do not use damaged or irregularly shaped discs.

Radio Operation

AM/FM tuning with preset memory.

  1. Select Band: Press BAND button to cycle between AM and FM.
  2. Tune Manually: Press and release TUNE up/down arrows to change frequency step-by-step.
  3. Scan (if available): Press and hold TUNE to scan for next strong station; release to listen.
  4. Store Presets: Tune to desired station. Press and hold a numbered PRESET button (1-6) until display confirms.
  5. Recall Preset: Briefly press the corresponding PRESET button.

Note: For best FM reception, fully extend the wire antenna and position it vertically. For AM, rotate the loop antenna.

Care & Cleaning

Unplug unit before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn marks, lightly dampen cloth with water. Do not use solvents or abrasive cleaners.

CD Lens Cleaning: Use a commercial CD lens cleaning disc if playback issues occur. Do not attempt to clean the laser lens manually.

CAUTION! Never allow liquid to enter the vents or openings. Keep unit away from direct heat and sunlight.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. Bose and the Bose Wave design are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service.

Troubleshooting

SymptomPossible CauseCorrective Action
No PowerPower cord unplugged / outlet deadCheck power connection; try a different outlet.
Remote does not workObstacles / dead batteriesPoint remote at sensor on unit; replace batteries.
CD won't playDisc dirty/damaged / wrong typeClean disc; ensure it's a standard Audio CD, CD-R, or CD-RW.
Poor radio receptionAntenna not connected/positionedCheck antenna connections; reposition FM wire antenna; rotate AM loop.
No sound from Aux inputWrong input selected / cable issueSelect AUX input; check cable connections; ensure external device is on and playing.
Clock resets after power lossNo battery backup installedInstall fresh batteries in the backup compartment to maintain clock and presets.

Reset: Unplug unit for 60 seconds, then plug back in to perform a soft reset.

Service: For product service, contact Bose Customer Support or visit www.bose.com/support.

Bose Wave Radio CD Player Manual © - All Rights Reserved 2025