Bose Wave Radio CD Pedestal Manual

The Bose Wave Radio CD Pedestal is an accessory designed to elevate your Bose Wave Radio/CD system, providing improved audio projection and a more integrated aesthetic. It features a sturdy construction, cable management, and compatibility with specific Bose Wave models. Below are key sections for overview, installation, setup, operation, care, and support.

1. Features at a Glance 2. Package Contents 3. Installation Guide 4. Setup & Connection 5. Operation 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Features at a Glance

Key components: Elevated platform, integrated cable routing, non-slip feet, and compatibility with Bose Wave Radio/CD systems.

FeatureDescription
Elevated DesignRaises system for improved sound dispersion and reduced surface vibration
Cable ManagementChannels for organizing power and audio cables neatly
Non-Slip FeetRubberized pads prevent sliding and protect surfaces
Sturdy ConstructionDurable materials support the weight of the Wave system securely
Aesthetic IntegrationDesigned to match the style of Bose Wave products

Package Contents

Unpack and verify all items are present.

NOTE: Contact Bose support if any items are missing or damaged.

Installation Guide

Ensure a stable, level surface. Follow steps carefully.

  1. Place the pedestal on your desired surface (table, shelf, etc.).
  2. Route cables through the designated channels at the rear.
  3. Gently place your Bose Wave Radio/CD system onto the pedestal, centering it.
  4. Ensure the system is stable and does not overhang the edges.
  5. Connect power and any audio cables to your Wave system as usual.

WARNING! Do not place the pedestal on unstable surfaces. Ensure the total setup is secure to prevent tipping.

Setup & Connection

After physical installation, configure your audio system.

  1. Power on your Bose Wave Radio/CD system.
  2. Adjust the system's audio settings (bass, treble) if desired, as elevation may affect sound perception.
  3. Use the cable management features to keep cords organized and out of sight.
  4. Test the stability by gently pressing on the corners of the Wave system.

CAUTION! Avoid pinching cables during routing. Do not force the Wave system onto the pedestal.

Operation

The pedestal is passive; operation is through your Bose Wave system.

Tip: The elevation may enhance stereo imaging. Experiment with placement for optimal sound.

Specifications

Care & Maintenance

Unplug all devices before cleaning.

  1. Use a soft, dry cloth to dust the pedestal.
  2. For stains, lightly dampen cloth with water; do not use solvents or abrasive cleaners.
  3. Periodically check rubber feet for wear and clean to maintain grip.
  4. Ensure cable channels are free of debris.

CAUTION! Do not use liquid cleaners directly on the pedestal. Avoid excessive moisture.

Troubleshooting

SymptomPossible CauseCorrective Action
Wave system unstable on pedestalPedestal not level; feet dirtyPlace on level surface; clean rubber feet; center Wave system.
Vibration or buzzing soundLoose contact; surface resonanceEnsure Wave system sits flat; move to a more solid surface; check cable routing.
Cables not fitting in channelsToo many or thick cablesUse only necessary cables; do not force thick connectors.
Pedestal slides on surfaceNon-slip feet worn or dirtyClean feet; replace if excessively worn (contact Bose).
Sound quality changeElevation affecting acousticsAdjust Wave system's tone controls; reposition entire setup.

Warranty & Support

Refer to the included warranty document for terms and duration.

Bose Contact Information:

NOTE: This accessory may be covered under the warranty of the main Wave system or have its own limited warranty.

Bose Wave Radio CD Pedestal Manual © - All Rights Reserved 2025