Bose Wave Radio CD AWRCC1 Manual

The Bose Wave Radio CD AWRCC1 is a premium tabletop audio system combining an AM/FM radio with a CD player, renowned for its waveguide speaker technology for rich, room-filling sound. It features preset station memory, clock/alarm functions, remote control, auxiliary input, and advanced tone controls. Powered by AC or optional battery backup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs 8. Radio Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, Remote Control, Auxiliary input jack, AC power input, Headphone jack.

FeatureDescription
Waveguide Speaker TechnologyProduces deep, spacious sound from a compact enclosure
CD PlayerPlays audio CDs, CD-R, CD-RW
AM/FM TunerWith 6 AM and 6 FM preset memory
Clock & AlarmDigital clock with dual alarm (radio or buzzer)
Remote ControlFull-function remote for all operations
Auxiliary Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening
Tone ControlsBass and treble adjustment
AC Power InputFor main power operation
Battery Backup (Optional)Maintains clock and presets during power outage

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug the AC power cord into the unit and then into a wall outlet.
  2. Connect antenna: Attach the supplied AM loop antenna and FM wire antenna.
  3. Connect auxiliary devices: Use 3.5mm audio cable to connect to external player via AUX IN jack.
  4. Insert batteries into remote control.

WARNING! Do not place near water or moisture. Ensure proper ventilation around the unit.

First-Time Setup

Plug in power; system will enter standby mode.

  1. Set clock: Press and hold CLOCK button, use HOUR/MINUTE buttons to set time.
  2. Set radio presets: Tune to desired station, press and hold a PRESET button (1-6) to store.
  3. Set alarms: Press ALARM button, select ALARM 1 or 2, set time and source (radio/buzzer).
  4. Adjust tone: Use BASS and TREBLE buttons to customize sound.

CAUTION! Use only the supplied AC adapter. Avoid extreme temperatures.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, PRESET buttons, TUNE/TRACK buttons, ALARM, CLOCK, BASS, TREBLE.

Remote: POWER, Numeric buttons (1-6 for presets), CD controls (PLAY, PAUSE, STOP, SKIP), VOLUME, MUTE, BAND (AM/FM), CLOCK, ALARM.

Radio: Manual tuning with TUNE buttons; preset selection with PRESET buttons. CD: PLAY, PAUSE, STOP, SKIP (forward/back), REPEAT. Clock/Alarm: Set time, alarm time, alarm source (radio/buzzer), snooze function. Tone: Adjust BASS and TREBLE independently.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack for MP3 players, smartphones, tablets.

  1. Turn off or pause the external device before connecting.
  2. Connect 3.5mm audio cable from device's headphone output to AUX IN jack on rear.
  3. Press FUNCTION button (or AUX on remote) to select auxiliary input.
  4. Start playback on external device and adjust volume on Wave Radio.

Tip: For best sound quality, set external device volume to about 75% maximum.

Playing CDs

Supports audio CDs, CD-R, CD-RW.

  1. Insert disc: Press CD OPEN/CLOSE, place CD label-side up in tray, press again to close.
  2. Play: Press PLAY; system automatically starts playback.
  3. Skip tracks: Press SKIP forward or backward to select tracks.
  4. Pause: Press PAUSE to temporarily halt playback.
  5. Stop: Press STOP; press again to return to beginning of CD.
  6. Repeat: Press REPEAT button to repeat current track or entire CD.
  7. Eject: Press CD OPEN/CLOSE to eject disc.

WARNING! Do not touch CD laser lens. Keep discs clean and free of scratches.

Radio Functions

AM/FM tuning with 6 presets per band.

  1. Select band: Press BAND button to toggle between AM and FM.
  2. Manual tuning: Press TUNE up or down to scan frequencies.
  3. Store presets: Tune to desired station, press and hold a PRESET button (1-6) until beep.
  4. Recall presets: Press corresponding PRESET button (1-6).
  5. Auto-scan: Not available; manual tuning only.

Note: For best FM reception, fully extend wire antenna and position properly.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth slightly with water only.

CAUTION! Never use solvents, abrasives, or spray cleaners. Do not allow moisture to enter vents or openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionEnsure AC cord is firmly plugged into unit and wall outlet.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor on front.
CD won't playDisc type/damageEnsure disc is audio CD (not MP3/data); check for scratches; clean disc.
Poor radio receptionAntenna placementExtend FM wire fully; reposition AM loop antenna; move unit location.
No sound from AUXConnection/input selectCheck cable connections; ensure FUNCTION is set to AUX; increase volume on source device.
Clock resetsPower interruptionInstall optional battery backup; otherwise, reset clock after power restoration.

Reset: Unplug unit for 1 minute, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Wave Radio CD AWRCC1 Manual © - All Rights Reserved 2025