Bose Wave Radio CD 2 Manual

The Bose Wave Radio CD 2 is a premium audio system combining an AM/FM radio and CD player with Bose waveguide speaker technology for enhanced sound quality. It features a clock with dual alarms, remote control, auxiliary input, preset stations, and various audio settings. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Clock and Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker system, CD player, AM/FM tuner, Clock with dual alarms, Remote Control, Auxiliary input, Headphone jack.

FeatureDescription
Waveguide speaker technologyEnhanced audio quality and bass response
CD playerPlays audio CDs, CD-R, CD-RW
AM/FM tunerWith 6 preset stations (3 AM, 3 FM)
Clock12/24 hour format with dual alarms
Remote controlFull function remote included
Auxiliary input3.5mm jack for external audio sources
Headphone jackFor private listening
AC power inputFor main power connection
Sleep timerAuto shut-off from 15-90 minutes
Tone controlAdjustable bass and treble

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Position unit: Place on flat surface away from heat sources and direct sunlight.
  2. Connect power: Plug AC adapter into unit and wall outlet.
  3. Connect antenna: Attach AM loop antenna and FM wire antenna.
  4. Connect auxiliary devices: Use 3.5mm cable for external audio sources.

WARNING! Do not place near water or moisture. Ensure proper ventilation around unit.

First-Time Setup

Connect power; system will enter setup mode.

  1. Set clock: Press and hold CLOCK button, use HOUR and MINUTE buttons.
  2. Set radio presets: Tune to desired station, press and hold preset button (1-6).
  3. Adjust tone: Use BASS and TREBLE controls for preferred sound.
  4. Test CD function: Insert CD to verify proper operation.

CAUTION! Handle with care; avoid dropping or impacting the unit.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, PRESET buttons, ALARM SET, CLOCK SET, BASS, TREBLE.

Remote: POWER, CD controls (PLAY, PAUSE, STOP, SKIP), RADIO BAND, PRESET, ALARM, SLEEP, VOLUME, MUTE.

Radio: AM/FM selection, manual tuning, preset storage. CD: Play, pause, stop, skip, repeat. Clock: Time set, alarm set (ALARM 1, ALARM 2), snooze. Audio: Bass and treble adjustment, mute function. Sleep Timer: 15, 30, 45, 60, 90 minute options.

Connecting Devices

Auxiliary input: 3.5mm jack for MP3 players, smartphones, tablets.

  1. Turn off unit before connecting devices.
  2. Connect 3.5mm cable from device to AUX IN jack.
  3. Press AUX button to select auxiliary input mode.
  4. Adjust volume on both device and Wave Radio.

Tip: For best sound quality, set connected device volume to 75% and adjust with Wave Radio volume control.

Playing CD Media

Supports audio CDs, CD-R, CD-RW.

  1. Insert disc: Press CD OPEN/CLOSE, place CD label side up.
  2. Play: Press PLAY; unit will read TOC and begin playback.
  3. Skip tracks: Use SKIP FORWARD/BACKWARD buttons.
  4. Pause: Press PAUSE; press again to resume.
  5. Stop: Press STOP; press CD OPEN/CLOSE to eject.
  6. Repeat: Press REPEAT for continuous track or disc playback.
  7. Random play: Press SHUFFLE for random track order.
  8. Program play: Use PROGRAM button to create custom play sequence.

WARNING! Do not use damaged or irregular shaped CDs. Keep CD compartment clean.

Clock and Alarm Features

Dual alarms with multiple wake options.

  1. Set alarm time: Press ALARM SET, select ALARM 1 or 2, set time.
  2. Choose wake source: Radio (preset station) or Buzzer.
  3. Set alarm volume: Adjust volume while alarm is sounding.
  4. Snooze: Press SNOOZE for 9 additional minutes.
  5. Alarm on/off: Press ALARM button to enable/disable.

Sleep Timer: Press SLEEP repeatedly for 15, 30, 45, 60, 90 minute options.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. CD lens cleaner can be used periodically.

CAUTION! Do not use solvents or abrasive cleaners. Avoid liquid contact with controls.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. For support, visit www.bose.com or contact 1-800-999-2673. This device complies with Part 15 of FCC Rules.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionCheck AC adapter connection; try different outlet.
CD won't playDisc/loading issueEnsure CD is clean, undamaged; insert properly label side up.
Poor radio receptionAntenna placementExtend FM wire antenna fully; position AM loop antenna.
Remote not workingBatteries/obstructionReplace batteries; ensure clear path to IR sensor.
No sound from AUXConnection/input selectCheck cable connections; press AUX button to select input.
Clock resetPower interruptionReset clock after power outage; consider battery backup.

Reset: Unplug unit for 2 minutes, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Wave Radio CD 2 Manual © - All Rights Reserved 2025