The Bose Wave Radio Bluetooth Adapter enables wireless audio streaming to compatible Bose Wave Radio systems. This accessory connects via the AUX input, allowing you to play music, podcasts, and other audio from Bluetooth-enabled devices like smartphones, tablets, and computers. Below are key sections for overview, setup, operation, troubleshooting, and specifications.
Key components: Bluetooth adapter unit, 3.5mm audio cable, USB power cable, user manual.
| Feature | Description |
|---|---|
| Bluetooth Version | Bluetooth 5.0 for stable, energy-efficient connection |
| Compatibility | Works with Bose Wave Radio I, II, III, and Music System via AUX input |
| Wireless Range | Up to 33 feet (10 meters) in open space |
| Audio Codec Support | SBC, AAC for high-quality audio streaming |
| Power Source | USB power (included) or optional USB wall adapter |
| Connection Type | 3.5mm stereo audio cable to Wave Radio AUX input |
| Pairing Button | For initiating Bluetooth pairing mode |
| Status LED | Indicates power, pairing, and connection status |
| Auto-Reconnect | Automatically reconnects to last paired device when powered on |
| Multi-Point Connection | Can remember multiple devices for easy switching |
Unpack and verify all items are present.
NOTE: USB wall adapter not included; use any standard 5V/1A USB power source.
Follow these steps to connect the adapter to your Bose Wave Radio.
CAUTION! Ensure all connections are secure. Do not force connectors.
The adapter has minimal physical controls; most operation is through your Bluetooth device.
Adapter Unit: Pairing button, Micro-USB power port, 3.5mm audio output, Status LED.
Status LED Indicators:
Device Controls: Use your Bluetooth device to control playback (play/pause, volume, track skip).
Pair your Bluetooth device with the adapter for the first time.
Tip: For subsequent use, the adapter will automatically reconnect to the last paired device when both are powered on and in range.
Once paired, stream audio from your device to your Bose Wave Radio.
WARNING! Keep the adapter away from other wireless devices that may cause interference (microwaves, routers, cordless phones).
Unplug the adapter before cleaning. Use a dry, soft cloth only; do not use liquids or aerosols.
CAUTION! Do not expose to extreme temperatures, moisture, or direct sunlight. Store in a cool, dry place when not in use.
FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Copyright © 2023 Bose Corporation. All rights reserved. For support, visit www.bose.com/support or contact 1-800-999-2673.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No sound from Wave Radio | Incorrect input selection | Ensure Wave Radio is set to AUX input |
| Adapter LED not lighting | No power | Check USB connection; try different USB power source |
| Device won't pair | Adapter not in pairing mode | Press and hold pairing button until LED flashes blue |
| Audio cutting out | Out of range or interference | Move device closer; reduce obstacles; avoid wireless interference |
| Poor audio quality | Low battery on source device | Charge source device; ensure within range |
| Can't control playback | AVRCP profile not supported | Check device compatibility; use device controls directly |
| Adapter not reconnecting | Bluetooth cache issue | Delete adapter from device Bluetooth list and re-pair |
Reset: Unplug adapter for 10 seconds, then reconnect. For persistent issues, delete adapter from all paired devices and perform fresh pairing.
Service: 1-800-999-2673; www.bose.com/support