Bose Wave Radio AWR113 Manual

The Bose Wave Radio AWR113 is a premium tabletop radio/CD player system featuring Bose waveguide speaker technology for enhanced sound quality, AM/FM tuner with 6 preset stations, CD player supporting audio CDs, dual alarm functions with weekday/weekend settings, auxiliary input for external audio sources, and remote control. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, Front Panel controls, Remote Control, Auxiliary input jack, Headphone jack.

FeatureDescription
Waveguide Speaker TechnologyDelivers enhanced bass and clear sound from compact design
CD PlayerPlays standard audio CDs
AM/FM TunerWith 6 preset stations (3 AM, 3 FM)
Dual AlarmTwo independent alarms with weekday/weekend settings
Auxiliary Input3.5mm jack for connecting external audio devices
Headphone JackFor private listening
Remote ControlIncludes basic playback and alarm controls
Power CordDetachable AC power cord
DisplayBacklit LCD showing time, station, track info
Sleep TimerAuto shut-off timer (15 to 90 minutes)

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug detachable power cord into rear of unit and into AC outlet.
  2. Connect antenna: Attach included AM loop antenna and FM wire antenna.
  3. Connect external devices: Use auxiliary input for MP3 players or other audio sources.
  4. Insert batteries into remote control (if included).

WARNING! Ensure proper ventilation; do not block rear vents. Keep away from moisture.

First-Time Setup

Plug in power; unit will enter standby mode (clock display).

  1. Set time: Press and hold CLOCK button, use HOUR/MINUTE buttons to set.
  2. Set alarms: Press ALARM 1 or ALARM 2 button, set time and alarm source (Radio/CD/Buzzer).
  3. Program radio presets: Tune to desired station, press and hold a numbered preset button (1-6).
  4. Adjust sound: Use BASS control on rear for tone adjustment.

CAUTION! Place unit on stable surface; avoid locations with direct sunlight.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, ALARM 1, ALARM 2, CLOCK, PRESET, TUNING, VOLUME, PLAY/PAUSE.

Remote: POWER, NUMERIC (1-6 for presets), CD controls (PLAY, PAUSE, STOP, PREV, NEXT), ALARM, CLOCK, SLEEP.

Radio: Manual tuning with TUNING buttons; preset selection with PRESET button. CD: Basic playback controls (PLAY, PAUSE, STOP, track skip). Alarm: Set time, source (Radio/CD/Buzzer), repeat (Everyday/Weekdays/Weekends). Clock: 12/24 hour format. Sleep Timer: Set duration (15-90 min) via SLEEP button.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack on rear panel. Headphone: 3.5mm jack on front.

  1. Ensure unit is powered off or in standby.
  2. Connect 3.5mm cable from external device (e.g., smartphone) to AUX IN jack.
  3. Press FUNCTION button (or AUX on remote) to select auxiliary input.
  4. Adjust volume on both Wave Radio and external device.

Tip: Use quality shielded cables for best audio performance.

Playing CD Media

Supports standard audio CDs (CD-DA).

  1. Insert disc: Press CD OPEN/CLOSE, place CD label-side up in tray, press again to close.
  2. Play: Press PLAY; unit will start playback from track 1.
  3. Skip tracks: Press PREV or NEXT to skip backward/forward.
  4. Pause: Press PAUSE to temporarily halt playback.
  5. Stop: Press STOP; press again to reset to track 1.
  6. Eject: Press CD OPEN/CLOSE during stop mode.
  7. Repeat: Not available on basic model.
  8. Random play: Not available on basic model.

WARNING! Do not force CD tray; use only standard 12cm audio CDs. Avoid scratched discs.

Alarm Functions

Dual independent alarms with flexible scheduling.

  1. Set Alarm Time: Press and hold ALARM 1 or ALARM 2, use HOUR/MINUTE buttons.
  2. Set Alarm Source: Choose Radio (last station), CD, or Buzzer (beep tone).
  3. Set Alarm Days: Choose Everyday, Weekdays (Mon-Fri), or Weekends (Sat-Sun).
  4. Activate/Deactivate: Press ALARM button briefly to toggle alarm on/off (icon shows on display).
  5. Snooze: Press any button (except POWER) during alarm to snooze for 9 minutes.

Note: If power is lost, clock and alarm settings must be reset.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For CD lens, use approved CD lens cleaner only.

CAUTION! Do not use liquids, solvents, or abrasive cleaners. Do not open enclosure.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. Trademarks used under license. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletEnsure power cord is securely connected; try different outlet.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear line of sight to IR sensor on front.
Poor radio receptionAntenna placementExtend FM wire antenna fully; reposition AM loop antenna.
CD won't playDisc/dirty lensEnsure CD is clean, not scratched; try known good CD. Use CD lens cleaner.
No sound from AUXConnection/input selectCheck cable connections; ensure AUX input is selected.
Alarm not soundingSettings/volumeVerify alarm is set ON; check alarm source volume (radio/CD).
Distorted soundSource/Bass settingAdjust BASS control on rear; check audio source quality.

Reset: Unplug unit for 1 minute, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Wave Radio AWR113 Manual © - All Rights Reserved 2025