Bose Wave Radio AWR1-1W Owners Manual

The Bose Wave Radio AWR1-1W is a premium tabletop radio system featuring Bose waveguide speaker technology for enhanced sound quality, AM/FM tuner with 6 preset stations, clock with alarm functions, auxiliary input for external audio sources, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Radio 8. Clock and Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker enclosure, AM/FM tuner, LCD display, Remote Control, Auxiliary input jack, Power cord.

Feature	Description
Bose waveguide technology	Delivers full, room-filling sound from a compact enclosure
AM/FM tuner	With 6 station presets (3 AM, 3 FM)
LCD display	Shows time, station frequency, and alarm status
Auxiliary input jack	For connecting external audio sources (e.g., MP3 player, CD player)
Clock with dual alarms	Wake to radio or buzzer; Snooze function
Remote control	For basic functions (power, volume, tuner, alarm set)
Power cord	Detachable AC power cord
Headphone jack	For private listening (optional)
Tone control	Adjusts bass and treble response
Sleep timer	Automatically turns off radio after set time

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources and moisture.

Connect power: Plug the detachable power cord into the radio and then into a standard 120V AC outlet.
Extend antenna: Fully extend the FM wire antenna for best reception. For AM, position the radio for optimal signal.
Placement: For best sound, place radio on a shelf or table against a wall to enhance bass response.
Connect optional devices: Use auxiliary input for external audio sources.

WARNING! Do not place near water or in humid environments. Ensure ventilation openings are not blocked.

First-Time Setup

Plug in power; radio will enter standby mode (clock display).

Set the clock: Press and hold CLOCK button, use TUNE/TIME SET buttons to set correct time.
Set alarms: Press ALARM 1 or ALARM 2 button, set time and choose wake source (radio or buzzer).
Program radio presets: Tune to desired station, press and hold a PRESET button (1-6) until display confirms.
Adjust tone: Use TONE button to cycle through bass/treble settings.

CAUTION! Use only the provided power cord. Avoid using extension cords if possible.

Specifications

Model: Bose Wave Radio AWR1-1W.
Audio System: Proprietary Bose waveguide speaker technology.
Tuner: AM/FM with 6 presets.
Display: Backlit LCD.
Inputs: Auxiliary input (3.5mm stereo jack), optional headphone jack.
Clock: 12/24 hour format, dual alarms with snooze.
Power Source: 120V AC, 60Hz.
Dimensions: Compact tabletop design.
Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Front Panel: POWER, VOLUME knob, TUNE/TIME SET buttons, CLOCK, ALARM 1, ALARM 2, TONE, PRESET buttons (1-6), BAND (AM/FM).

Remote: POWER, VOLUME UP/DOWN, PRESET (1-6), TUNE UP/DOWN, ALARM 1/2 SET, CLOCK SET, SNOOZE.

Clock Settings: Set time, 12/24 hour format. Alarm Settings: Set time, choose radio or buzzer, adjust alarm volume. Radio Settings: Manual tuning, preset memory, tone adjustment (bass/treble). Sleep Timer: Set duration (15-90 minutes).

Connecting Devices

Auxiliary Input: Connect external audio source (e.g., smartphone, tablet) using 3.5mm stereo cable.

Ensure radio is off or in standby.
Connect cable from device's headphone jack to AUX IN on back of radio.
Press AUX button (or select AUX input via remote) to hear audio from connected device.
Control volume using radio's volume knob/remote.

Tip: For best audio quality, set connected device's volume to about 75% and use radio for final volume adjustment.

Using the Radio

Supports AM and FM bands with manual tuning and preset recall.

Turn on: Press POWER button.
Select band: Press BAND button to toggle between AM and FM.
Tune manually: Use TUNE/TIME SET buttons to scan frequencies.
Use presets: Press numbered PRESET button (1-6) to recall saved station.
Save preset: Tune to station, press and hold desired PRESET button until display flashes.
Adjust volume: Turn VOLUME knob or use remote.
Sleep timer: Press SLEEP button repeatedly to set shut-off time (15-90 min).
Tone adjustment: Press TONE button to cycle through preset equalizer settings.

WARNING! Do not insert objects into speaker ports or ventilation openings.

Clock and Alarm Functions

Dual alarms with choice of wake source.

Set clock: Hold CLOCK, use TUNE/TIME SET to adjust, press CLOCK to confirm.
Set Alarm 1: Press ALARM 1, set time, choose RADIO or BUZZER, set volume (if radio).
Set Alarm 2: Repeat for ALARM 2.
Enable/disable: Press ALARM 1 or ALARM 2 to toggle alarm on/off (icon shows on display).
Snooze: Press SNOOZE button or top of radio during alarm to pause for 9 minutes.

Note: If power is lost, clock and alarm settings may need to be reset.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn marks, dampen cloth slightly with water only.

CAUTION! Do not use abrasive cleaners, solvents, or sprays. Do not allow moisture to enter openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and the Bose waveguide are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into radio and outlet.
Poor FM reception	Antenna not extended	Fully extend FM wire antenna; reposition radio.
No sound from auxiliary input	Incorrect input selected	Press AUX button to select auxiliary input mode.
Clock reset after power outage	Backup battery depleted	Reset clock time; internal backup battery may need service if frequent.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure clear path to radio's IR sensor.
Alarm does not sound	Alarm disabled or volume low	Check alarm on/off status; increase alarm volume setting.

Reset: Unplug for 60 seconds, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com