bose wave radio awr1 1w manual

The Bose Wave Radio AWR1-1W is a compact, high-performance radio system featuring advanced waveguide speaker technology for rich, room-filling sound. It includes an AM/FM tuner with 6 preset stations, a clock with alarm functions, and a sleek, space-saving design. Key features include a credit card-style remote control, auxiliary input for external audio sources, and simple, intuitive controls. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Radio 8. Clock and Alarm Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with waveguide speaker technology, Credit Card Remote Control, AC power cord, FM wire antenna, AM loop antenna.

Feature	Description
Waveguide Speaker Technology	Delivers full, natural sound from a compact enclosure
AM/FM Tuner	With 6 station presets (3 AM, 3 FM)
Credit Card Remote	Controls power, volume, tuning, presets, and clock functions
Auxiliary Input	3.5mm jack for connecting CD players, smartphones, or tablets
Clock with Alarm	Digital clock with dual alarm and snooze function
AC Power Input	For main power connection
POWER Button	Turns radio on/off; also controls standby mode
PRESET Buttons	For quick access to saved radio stations
TUNE/SEEK Buttons	Manual tuning and automatic station seek
VOLUME Control	Rotary knob or remote buttons for adjusting sound level

Installation

Unpack and inspect contents. Place on a stable, level surface away from heat sources and moisture.

Connect antennas: Attach the FM wire antenna to the FM terminal. Position the AM loop antenna and connect it to the AM terminals.
Connect auxiliary device (optional): Use a 3.5mm audio cable to connect your external device to the AUX IN jack.
Plug into AC power outlet.

WARNING! Do not place the radio near water or in damp locations. Ensure the power cord is not pinched or damaged.

First-Time Setup

Plug in the radio; the display will light up.

Set the clock: Press and hold the CLOCK button, then use TUNE/SEEK buttons to set the correct time. Press CLOCK again to confirm.
Set the alarm: Press the ALARM button, then use TUNE/SEEK to set alarm time. Select alarm source (Radio or Buzzer).
Tune and save radio presets: Tune to a desired station, press and hold a PRESET button (1-6) until the display confirms.

CAUTION! Use only the provided power cord. Ensure proper ventilation around the unit.

Specifications

Model: Bose Wave Radio AWR1-1W.
Tuner: AM/FM with 6 presets.
Audio Technology: Proprietary Bose waveguide speaker.
Inputs: Auxiliary input (3.5mm stereo jack).
Outputs: None.
Clock Features: 12/24 hour format, dual alarm, snooze.
Remote Control: Credit card-style infrared remote (included).
Power Source: 120V AC, 60Hz.
Dimensions: Compact design suitable for bedside, kitchen, or office.

Controls and Settings

Front Panel: POWER, VOLUME knob, PRESET buttons (1-6), TUNE/SEEK buttons, CLOCK, ALARM, AUX button.

Remote: POWER, VOLUME Up/Down, PRESET (1-6), TUNE/SEEK, MUTE, CLOCK, ALARM, SNOOZE, AUX.

Radio Operation: Press POWER, select AM/FM with BAND button, tune manually with TUNE or automatically with SEEK. Save stations to PRESET buttons. Clock Settings: Adjust time, set alarm 1 & 2, choose alarm sound (Radio/Buzzer), enable/disable alarm. Audio: Adjust volume via knob or remote. Use AUX button to switch to external audio source.

Connecting Devices

Auxiliary Input: Connect external audio sources (CD player, phone, tablet) via 3.5mm stereo cable to AUX IN jack.

Ensure the radio and external device are powered off.
Connect one end of the audio cable to the device's headphone/line-out jack.
Connect the other end to the AUX IN jack on the back of the Wave Radio.
Power on both devices. Press the AUX button on the radio or remote to select the auxiliary input.

Tip: For best sound quality, set the external device's volume to about 75% and use the radio's volume control for final adjustment.

Using the Radio

Supports AM and FM bands.

Power on: Press POWER button on unit or remote.
Select band: Press BAND button to toggle between AM and FM.
Tune: Use TUNE buttons for manual tuning or SEEK for automatic station search.
Save preset: Tune to station, press and hold a numbered PRESET button (1-6) for 2 seconds.
Recall preset: Briefly press the corresponding PRESET button.
Adjust volume: Use the VOLUME knob on the unit or VOLUME buttons on the remote.
Mute: Press MUTE on the remote to temporarily silence audio.

WARNING! Do not insert objects into the speaker ports or vents. Keep the remote control battery compartment secure.

Clock and Alarm Functions

Clock: Press CLOCK button to view time setting mode. Use TUNE/SEEK to adjust. Alarm: Press ALARM button to set alarm time and sound source (Radio on last station used, or Buzzer). Enable/disable alarm by pressing ALARM ON/OFF. Snooze: Press SNOOZE on remote or top of unit to pause alarm for 9 minutes.

Care & Cleaning

Unplug from power before cleaning. Wipe exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

CAUTION! Never allow moisture to enter the unit. Keep away from direct heat sources.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. Bose and Wave Radio are trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into unit and wall outlet.
Poor radio reception	Antenna not connected/positioned	Check FM wire and AM loop antenna connections. Reposition antennas.
Remote not working	Batteries/obstructions	Replace remote batteries. Ensure clear line of sight to IR sensor on radio.
No sound from AUX input	Incorrect input selected/cable	Press AUX button to select auxiliary input. Check audio cable connections.
Alarm does not sound	Alarm disabled/wrong source	Ensure alarm is enabled (ALARM ON). Verify alarm source (Radio/Buzzer) is set correctly.
Clock resets	Power interruption	Clock requires constant power. If unplugged, time and settings will be lost and need resetting.

Reset: Unplug unit for 1 minute to perform a soft reset of the microprocessor.

Service: For product service, contact Bose Customer Support or visit www.bose.com.