The Bose Wave Music System DAB Module is an add-on digital radio tuner designed to integrate seamlessly with compatible Bose Wave Music Systems. It adds Digital Audio Broadcasting (DAB/DAB+) reception, providing access to a wide range of digital radio stations with improved sound quality and station information display. Below are key sections for overview, installation, operation, features, and troubleshooting.
Key components: DAB Module unit, Connection cable, Power adapter, Quick Start guide.
| Feature | Description |
|---|---|
| DAB/DAB+ Tuner | Receives digital radio broadcasts for superior sound and station info |
| Seamless Integration | Designed to connect directly to compatible Bose Wave Music Systems |
| Station Display | Shows station name, program information, and signal strength |
| Preset Memory | Store and quickly access favorite DAB stations |
| Auto-Scan | Automatically finds all available DAB stations in your area |
| Power Adapter | Provides dedicated power to the DAB module |
| Connection Port | Proprietary port for linking to the Wave Music System |
| Status LED | Indicates power and signal acquisition |
Unpack and verify all items are present.
NOTE: If any item is missing or damaged, contact Bose customer service immediately.
Power off your Bose Wave Music System before installation.
CAUTION! Ensure all connections are secure. Use only the provided Bose power adapter.
Primary control is through your existing Bose Wave Music System remote and interface.
Source Selection: Press the 'AUX' or 'SOURCE' button on your remote until 'DAB' is displayed.
Station Tuning: Use TUNE/SCROLL buttons to browse stations. Press SELECT/ENTER to choose.
Auto-Tune: Initiate a full scan for available stations via the system menu (often under 'DAB Setup').
Presets: While tuned to a station, press and hold a numbered button (1-6) to store it. Press briefly to recall.
Info Button: Displays detailed program information (DLS text) for the current station.
The connection is designed for specific rear-panel ports on compatible models.
Tip: Refer to your Wave Music System manual for the exact location of the accessory port.
Once installed and selected as the source, the DAB module operates like a digital tuner.
WARNING! Do not disconnect the module while the system is powered on.
Store your favorite DAB stations for instant access.
To Clear a Preset: Store a new station over an existing preset, or perform a factory reset via the system menu.
Unplug the power adapter before cleaning. Use a soft, dry cloth to dust the module. Do not use liquids or cleaners.
CAUTION! Keep the module and cables away from heat sources, direct sunlight, and moisture. Ensure ventilation around the unit.
This device complies with relevant radio equipment and electromagnetic compatibility directives. The Bose name and Wave Music System are trademarks of Bose Corporation. For technical support, compatibility verification, or service, visit www.bose.com/support or contact Bose Customer Service in your region.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| 'DAB' source not shown | Connection/Power | Check cable is firmly connected at both ends. Ensure DAB Module power adapter is plugged in. |
| No stations found | Signal/Scan needed | Perform an Auto-Tune scan. Reposition the Wave system/DAB module for better reception. |
| Poor sound or dropouts | Weak signal | Check signal strength indicator. Move system to a location with better DAB coverage. |
| Presets lost | Power interruption | Presets are usually retained. If lost, re-scan for stations and reprogram presets. |
| Module not recognized | Incompatibility/Fault | Verify your Wave Music System model is compatible. Try disconnecting and reconnecting all cables with power off. |
Reset: Disconnect power from both the Wave system and DAB Module for 2 minutes, then reconnect.
Service: For persistent issues, contact Bose support: www.bose.com/support