Bose Wave Machine Manual

The Bose Wave Machine is a premium audio system featuring CD/MP3 CD playback, AM/FM tuner, clock/alarm functions, remote control, auxiliary input, and Bose waveguide speaker technology for enhanced sound quality. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Clock and Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker system, CD player, AM/FM tuner, LCD display, Remote Control, Auxiliary input, Headphone jack.

FeatureDescription
Bose Waveguide SpeakerPatented technology for full, room-filling sound
CD/MP3 CD PlayerPlays audio CDs and MP3 files from CD-R/RW
AM/FM TunerPreset memory for 30 stations (15 AM, 15 FM)
Auxiliary Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening
Remote ControlFull-function remote for all operations
Clock/AlarmDual alarm with wake to CD/radio/buzzer
LCD DisplayShows time, track info, station frequency
Sleep TimerAutomatic shut-off from 15 to 90 minutes
AC Power CordDetachable power connection

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Position unit: Place on flat surface away from heat sources and direct sunlight.
  2. Connect power: Plug detachable AC power cord into unit and wall outlet.
  3. Connect antenna: Attach AM loop antenna and FM wire antenna.
  4. Connect auxiliary devices: Use 3.5mm cable to connect external audio sources.

WARNING! Do not place near water or moisture. Ensure proper ventilation around unit.

First-Time Setup

Plug in power cord; system will enter standby mode.

  1. Set clock: Press and hold CLOCK button, use HOUR/MINUTE buttons to set time.
  2. Program radio stations: Tune to desired station, press and hold preset button (1-5) for 2 seconds.
  3. Set alarms: Press ALARM button, select alarm 1 or 2, set time and source (CD/radio/buzzer).
  4. Adjust sound: Use BASS and TREBLE controls for preferred audio settings.

CAUTION! Handle remote control carefully; avoid dropping or exposing to liquids.

Specifications

Controls and Settings

Front Panel: POWER, EJECT, PLAY/PAUSE, STOP, TUNING/BAND, PRESET, ALARM, CLOCK, BASS, TREBLE.

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, SKIP), TUNER controls, VOLUME, MUTE, ALARM, CLOCK, DISPLAY.

Audio Settings: BASS (-6 to +6), TREBLE (-6 to +6), LOUDNESS (On/Off). Clock Settings: 12/24 hour format, alarm volume, snooze duration (5-30 minutes). Tuner Settings: Auto-scan, manual tuning, preset memory. Display: Brightness control, sleep timer settings.

Connecting Devices

Auxiliary Input: 3.5mm stereo jack for MP3 players, smartphones, tablets.

  1. Turn off Bose Wave system before connecting devices.
  2. Connect 3.5mm cable from device's headphone jack to AUX IN on back of unit.
  3. Press AUX button on remote or front panel to select auxiliary input.
  4. Adjust volume on both device and Bose system for optimal sound.

Tip: For best sound quality, use high-quality audio cables and ensure device volume is at 50-75% before adjusting system volume.

Playing Media

Supports audio CDs and MP3 CDs.

  1. Insert disc: Press EJECT to open tray, place CD label-side up, press EJECT again to close.
  2. Play: Press PLAY; use SKIP buttons to navigate tracks.
  3. Pause: Press PLAY/PAUSE to temporarily stop playback.
  4. Stop: Press STOP to end playback (system remembers stop position).
  5. Repeat: Press REPEAT button for track/all disc repeat modes.
  6. Random: Press SHUFFLE for random track playback.
  7. MP3 CD navigation: Use folder buttons to navigate MP3 directory structure.
  8. Resume: System remembers last playback position after power off.

WARNING! Do not touch laser lens; keep discs clean and free of scratches.

Clock and Alarm Features

Dual Alarm: Set two independent alarms with different sources.

  1. Set alarm time: Press ALARM, select alarm 1 or 2, set hour/minute.
  2. Choose wake source: CD (last played), Radio (preset station), or Buzzer.
  3. Set alarm volume: Adjust with volume controls during alarm setup.
  4. Snooze: Press SNOOZE during alarm for additional sleep (default 9 minutes).
  5. Sleep timer: Press SLEEP to set automatic shut-off (15-90 minutes).

Note: Alarm will sound even if system is powered off (standby mode).

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only.

CAUTION! Never use solvents, abrasives, or spray cleaners. Do not allow moisture to enter vents or controls.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose and Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletEnsure power cord is securely connected; try different outlet.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor on unit.
CD won't playDisc format/damageEnsure disc is clean, not scratched; check if MP3 CD is properly formatted.
Poor radio receptionAntenna placementExtend FM wire antenna fully; reposition AM loop antenna.
No sound from AUXConnections/input selectCheck cable connections; ensure AUX input is selected.
Alarm not soundingSettings/volumeVerify alarm is enabled; check alarm volume setting.
Distorted soundSource quality/settingsAdjust bass/treble settings; check audio source quality.

Reset: Unplug unit for 1 minute, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com/support

Bose Wave Machine Manual © - All Rights Reserved 2025