Bose Wave Clock Radio Manual

The Bose Wave Clock Radio is a premium audio system combining high-fidelity sound with an integrated digital clock and AM/FM tuner. It features Bose waveguide speaker technology for rich, room-filling sound, a dual-alarm system with weekday/weekend settings, preset radio stations, auxiliary input for external devices, and a credit card-style remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Alarm System 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker system, Digital AM/FM tuner, Dual-alarm clock, Credit card remote control, Auxiliary input jack, Preset station memory.

Feature	Description
Waveguide Speaker Technology	Delivers full, natural sound from a compact system
Digital AM/FM Tuner	With 6 preset stations (3 AM, 3 FM)
Dual-Alarm System	Two independent alarms with weekday/weekend settings
Credit Card Remote	Controls power, volume, alarms, presets, and sleep timer
Auxiliary Input	3.5mm jack for connecting MP3 players, smartphones, etc.
Display Dimmer	Adjusts clock brightness for day/night viewing
Sleep Timer	Automatically turns off audio after set time (10-90 minutes)
Power Source	AC power with battery backup for clock and presets
Headphone Jack	For private listening (optional)
Tone Control	Adjusts bass and treble response

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

Connect power: Plug AC power cord into wall outlet (120V AC, 60Hz).
Insert backup batteries: Install 2 AA batteries (not included) for clock/preset memory backup.
Connect antenna: Extend AM loop antenna and FM wire antenna for best reception.
Connect auxiliary devices: Use 3.5mm audio cable to connect external audio source.

WARNING! Do not place near water or moisture. Ensure proper ventilation around unit.

First-Time Setup

Plug in power; system will beep and display will illuminate.

Set time: Press and hold TIME SET, then use HOUR and MINUTE buttons.
Set alarms: Press ALARM 1 or ALARM 2 button, then set time and alarm type (buzzer or radio).
Program radio presets: Tune to desired station, press and hold preset button (1-6) for 2 seconds.
Adjust tone: Use BASS and TREBLE buttons to customize sound.
Set display brightness: Press DIMMER button to cycle through brightness levels.

CAUTION! Use only recommended batteries. Do not mix old and new batteries.

Specifications

Audio System: Bose waveguide speaker technology.
Tuner: Digital AM/FM with 6 presets (3 AM, 3 FM).
Clock: 12/24 hour format, dual-alarm with snooze (10 minutes).
Inputs: Auxiliary input (3.5mm), AM/FM antenna terminals.
Outputs: Headphone jack (3.5mm).
Remote Control: Credit card-style infrared remote (included).
Power Source: 120V AC, 60Hz; battery backup (2 AA batteries).
Dimensions: Compact design fits on nightstand or desk.
Weight: Approximately 6.5 lbs (2.9 kg).

Controls and Settings

Front Panel: POWER, ALARM 1, ALARM 2, TIME SET, PRESET, TUNE, BASS, TREBLE, DIMMER, SNOOZE.

Remote: POWER, VOLUME UP/DOWN, PRESET 1-6, ALARM 1/2, SLEEP, MUTE, AUX.

Clock Settings: Time format (12/24 hour), alarm type (buzzer/radio), alarm volume. Audio Settings: Bass, treble, balance (if available). Radio Settings: Manual/auto tuning, preset programming. System Settings: Display brightness, sleep timer duration (10-90 min), backup battery indicator.

Connecting Devices

Auxiliary Input: 3.5mm jack for external audio sources. Headphone Output: 3.5mm jack for private listening.

Turn off system before connecting devices.
Connect audio cable from device's headphone/output jack to AUX IN on back of unit.
Press AUX button on remote or front panel to select auxiliary input.
Adjust volume on both device and Wave Radio for optimal sound.

Tip: For best audio quality, use high-quality audio cables and ensure connections are secure.

Using the Alarm System

Dual alarms with flexible scheduling options.

Set alarm time: Press ALARM 1 or 2, then use HOUR and MINUTE buttons.
Select alarm type: Choose between buzzer or radio (press ALARM TYPE button).
Set alarm volume: Adjust volume while alarm is sounding or in setup.
Enable/disable alarms: Press ALARM ON/OFF button for each alarm.
Snooze function: Press SNOOZE button to pause alarm for 10 minutes.
Weekday/weekend settings: Some models allow different schedules for weekdays vs. weekends.

WARNING! Test alarm function after setup. Battery backup ensures alarms work during power outages.

Radio Operation

Digital tuning with preset memory.

Select band: Press AM/FM button to choose band.
Tune manually: Press TUNE UP/DOWN buttons to search.
Tune automatically: Press and hold TUNE button for auto-scan.
Save presets: Tune to station, press and hold preset button (1-6) for 2 seconds.
Recall presets: Press corresponding preset button (1-6).
Adjust reception: Reposition AM loop antenna or FM wire antenna for better signal.

Note: Preset stations are saved in memory with battery backup.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only.

CAUTION! Do not use solvents, abrasives, or aerosol sprays. Keep liquids away from unit. Do not open cabinet - no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Ensure power cord is securely plugged into outlet and unit.
Clock resets	Backup batteries dead/missing	Replace both AA batteries with fresh ones.
Poor radio reception	Antenna positioning	Reposition AM loop antenna; extend FM wire antenna fully.
No sound from auxiliary	Input selection/connections	Press AUX button; check cable connections; ensure source is playing.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure clear path to IR sensor on front.
Alarm doesn't sound	Alarm disabled/volume low	Check alarm is enabled; increase alarm volume in settings.
Distorted sound	Source quality/volume too high	Reduce volume; check audio source quality; adjust tone controls.

Reset: Unplug unit for 60 seconds, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com