Bose Wave AWRCC2 Owners Manual

The Bose Wave AWRCC2 is a premium tabletop radio/CD player system featuring advanced waveguide speaker technology for rich, room-filling sound. It includes a built-in CD player, AM/FM tuner with presets, clock with alarm functions, remote control, auxiliary input, and headphone jack. Designed for 120V AC operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Clock and Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker enclosure, CD player, AM/FM tuner, LCD display, Remote Control, Auxiliary input jack, Headphone jack.

FeatureDescription
Waveguide Speaker TechnologyProduces deep, full sound from a compact system
CD PlayerPlays audio CDs and CD-R/RW discs
AM/FM TunerWith 6 AM and 6 FM station presets
LCD DisplayShows time, station, track info, and settings
Remote ControlFull-function remote for all operations
Auxiliary Input JackFor connecting external audio sources (e.g., MP3 player)
Headphone JackFor private listening (3.5mm)
Clock & Dual AlarmsWake to radio, CD, or buzzer
Sleep TimerAutomatically turns system off
AC Power CordFor 120V AC connection

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Position the system: Ensure at least 4 inches of clearance on all sides for proper ventilation and sound.
  2. Connect power: Plug the AC power cord into a 120V outlet.
  3. Set up antenna: Extend the AM loop antenna and position the FM wire antenna for best reception.
  4. Connect optional devices: Use auxiliary input for external audio source; insert headphones if desired.

WARNING! Do not place in enclosed cabinet or near heat sources. Use correct voltage.

First-Time Setup

Plug in power; system will enter standby mode (display shows time).

  1. Set the clock: Press and hold CLOCK button, use TUNE/SKIP to set time, press CLOCK again.
  2. Set radio presets: Tune to desired station, press and hold a preset button (1-6) to store.
  3. Adjust tone: Use BASS and TREBLE controls on remote for desired sound.
  4. Test CD play: Insert a CD to verify operation.

CAUTION! Handle CDs by edges; avoid touching playback surface.

Specifications

Controls and Settings

Front Panel: POWER, EJECT, PLAY/PAUSE, TUNE/SKIP, BAND, PRESET, CLOCK, ALARM. Display: Shows time, source, track, preset.

Remote: POWER, Numeric (1-6 for presets), EJECT, PLAY/PAUSE, STOP, SKIP, BAND, PRESET, CLOCK, ALARM, SLEEP, BASS, TREBLE, MUTE, VOLUME.

Radio: TUNE/SKIP to seek stations; BAND to switch AM/FM; store presets. CD: PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM. Clock/Alarm: Set time, alarm 1 & 2 (wake to radio, CD, or buzzer), sleep timer (15-90 min). Tone: Adjust BASS and TREBLE via remote. Display: Adjust contrast if needed (see advanced setup).

Connecting Devices

Auxiliary Input: Connect external audio source (e.g., smartphone, tablet) using 3.5mm cable. Headphones: Plug into headphone jack for private listening.

  1. Ensure system is off or in standby.
  2. Connect cable from device's headphone/line-out to AUX IN jack on rear.
  3. Press AUX button on remote to select auxiliary source.
  4. Adjust volume on both system and external device.

Tip: For best audio quality, set external device volume to about 75% and control final level with system volume.

Playing CD Media

Supports audio CDs, CD-R, CD-RW (with audio tracks).

  1. Insert disc: Press EJECT to open tray, place CD label-up, press EJECT or gently push tray to close.
  2. Play: Press PLAY; display shows track number and elapsed time.
  3. Skip tracks: Press SKIP (forward/back) or use numeric buttons for direct track access.
  4. Pause/Stop: Press PAUSE to pause; press STOP once to stop (retains memory), twice to clear memory.
  5. Repeat/Random: Press REPEAT for repeat track/disc; press RANDOM for shuffle play.
  6. Eject: Press EJECT during play or stop.

WARNING! Do not move system while CD is playing. Keep discs clean and free of scratches.

Clock and Alarm Features

Set Clock: Hold CLOCK, use TUNE/SKIP to adjust, press CLOCK to set. Alarm 1 & 2: Hold ALARM button, select alarm (1 or 2), set time, choose source (RADIO, CD, BUZZER), set volume, press ALARM to enable/disable. Sleep Timer: Press SLEEP repeatedly to set delay (15-90 min, OFF). Snooze: Press any button during alarm to snooze for 9 minutes.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For CD lens: Use approved CD lens cleaner only.

CAUTION! Do not use solvents or abrasive cleaners. Avoid liquids near vents or controls.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © Bose Corporation. Trademarks owned by Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletEnsure cord plugged in; try different outlet; check circuit breaker.
Remote not workingBatteries/obstructionReplace batteries; point remote at sensor; remove obstacles.
Poor radio receptionAntenna placementReposition AM loop and FM wire antenna; avoid metal surfaces.
CD won't playDisc/dirty lensEnsure CD is clean, not scratched; try known good CD; use lens cleaner.
No sound from AUXConnection/sourceCheck cable connections; ensure external device is on and playing.
Alarm not soundingSettings/volumeVerify alarm is enabled, time set, source selected, and volume adequate.

Reset: Unplug power for 2 minutes, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Wave AWRCC2 Owners Manual © - All Rights Reserved 2025