bose wave awrcc2 manual

The Bose Wave AWRCC2 is a premium radio/CD player system featuring advanced waveguide speaker technology for rich, room-filling sound. It includes an AM/FM tuner with presets, a CD player, a clock with alarm functions, and a remote control. The system is designed for easy setup and operation with intuitive controls for audio playback, radio tuning, and system settings. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Clock and Alarm Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with waveguide speaker technology, Remote Control, AM/FM antenna connections, CD slot, Auxiliary input jack, Headphone jack.

FeatureDescription
Waveguide Speaker TechnologyProduces deep, full sound from a compact system
AM/FM TunerWith 6 AM and 6 FM station presets
CD PlayerPlays audio CDs and CD-R/RW discs
Auxiliary InputFor connecting external audio sources (e.g., MP3 player)
Headphone JackFor private listening
Clock with Dual AlarmsWake to radio, CD, or buzzer
Remote ControlFull-function remote for all operations
Sleep TimerAutomatically turns system off after set time
Bass/Treble ControlsAdjustable sound settings
Power CordDetachable AC power cord

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect antennas: Attach AM loop antenna and FM wire antenna to rear terminals.
  2. Position antennas: For best reception, extend FM antenna fully and place AM loop antenna appropriately.
  3. Connect auxiliary device (optional): Use 3.5mm audio cable to connect to AUX IN jack.
  4. Plug into AC power outlet.

WARNING! Do not place heavy objects on top of the unit. Ensure ventilation openings are not blocked.

First-Time Setup

Plug in power cord; system will enter standby mode (clock display).

  1. Set the clock: Press and hold CLOCK button, then use HOUR and MINUTE buttons.
  2. Set radio presets: Tune to desired station, press and hold a numbered preset button (1-6).
  3. Adjust bass/treble: Use BASS and TREBLE buttons on remote to customize sound.
  4. Test alarms: Set alarm time and source (Radio, CD, or Buzzer).

CAUTION! Handle the unit with care. Avoid placing near sources of electrical interference.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, ALARM, CLOCK, PRESET, TUNING, VOLUME, BASS, TREBLE.

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, SKIP), RADIO BAND, PRESET, ALARM SET, SLEEP, MUTE, BASS/TREBLE.

Sound Settings: Adjust BASS and TREBLE levels. Radio: Manual TUNING or PRESET selection. Clock: Set time, alarm times, and alarm source (Radio/CD/Buzzer). System: Sleep timer (15-90 minutes), display brightness.

Connecting Devices

Auxiliary Input: Connect MP3 player, smartphone, or tablet using 3.5mm audio cable.

  1. Ensure system is off or in standby.
  2. Connect cable from device's headphone jack to AUX IN on rear of unit.
  3. Press AUX button on remote to select auxiliary input.
  4. Start playback on your external device.

Tip: For best audio quality, set your external device's volume to about 75% and adjust using the system's volume control.

Playing CD Media

Supports audio CDs, CD-R, CD-RW.

  1. Insert disc: Press CD OPEN/CLOSE, place CD in slot with label facing up.
  2. Play: Press PLAY; disc will start automatically if not paused.
  3. Skip tracks: Press SKIP FORWARD or SKIP BACKWARD.
  4. Pause/Resume: Press PAUSE; press again or PLAY to resume.
  5. Stop: Press STOP; press CD OPEN/CLOSE to eject disc.
  6. Repeat/Shuffle: Press REPEAT or SHUFFLE on remote for playback modes.
  7. Program play: Use PROGRAM button to select specific tracks in desired order.

WARNING! Do not insert damaged or irregularly shaped discs. Keep CD slot free of obstructions.

Clock and Alarm Features

Dual Alarms: Set two independent alarms with different sources.

  1. Set alarm time: Press and hold ALARM 1 or ALARM 2, set time with HOUR/MINUTE.
  2. Choose alarm source: Select Radio, CD, or Buzzer tone.
  3. Activate/deactivate: Press ALARM button to turn selected alarm ON/OFF.
  4. Snooze: Press SNOOZE during alarm for 9 more minutes of sleep.
  5. Sleep timer: Press SLEEP repeatedly to set shut-off time (15-90 min).

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth for exterior. For stubborn marks, dampen cloth slightly with water.

CAUTION! Never use abrasive cleaners, solvents, or spray directly on unit. Do not allow moisture to enter openings.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. All rights reserved. Bose and the Bose Wave system design are trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedEnsure power cord is firmly plugged into unit and wall outlet.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor on front.
Poor radio receptionAntenna placementReposition FM antenna; rotate AM loop antenna for better signal.
CD won't playDisc type/damageEnsure disc is audio CD format (not MP3 CD); check for scratches.
No sound from AUXInput selection/volumePress AUX button; check volume on both system and external device.
Alarm not soundingAlarm off/wrong sourceVerify alarm is ON and correct source (Radio/CD/Buzzer) is selected.

Reset: Unplug unit for 1 minute, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

bose wave awrcc2 manual © - All Rights Reserved 2025