The Bose Wave 3 Bluetooth Adapter is a compact accessory designed to add wireless audio streaming capabilities to your Bose Wave 3 music system. It connects via the auxiliary input, supports Bluetooth 5.0 for stable connectivity, and allows you to stream music, podcasts, and other audio from smartphones, tablets, or computers. Below are key sections for overview, features, installation, pairing, operation, troubleshooting, and specifications.
Key components: Bluetooth Adapter unit, 3.5mm audio cable, USB power cable, Status LED.
| Feature | Description |
|---|---|
| Bluetooth Version | 5.0 for extended range and stable connection |
| Audio Codec Support | SBC, AAC for high-quality audio streaming |
| Connection Type | 3.5mm auxiliary input to Bose Wave 3 system |
| Power Source | USB power (5V/1A) from wall adapter or USB port |
| Operating Range | Up to 33 feet (10 meters) line-of-sight |
| Status LED | Indicates power, pairing, and connection status |
| Auto-Reconnect | Automatically reconnects to last paired device |
| Multi-Point Pairing | Can remember up to 2 devices simultaneously |
| Compact Design | Small footprint, discreet placement |
| Universal Compatibility | Works with most Bluetooth-enabled audio sources |
Unpack and verify all items are present.
NOTE: USB wall adapter not included. Use a standard 5V/1A USB power adapter.
Follow these steps to connect the adapter to your Bose Wave 3 system.
CAUTION! Ensure all connections are secure. Use the provided cables for optimal performance.
The adapter has one physical button and a multi-color LED indicator.
Power/Pairing Button: Press and hold for 5 seconds to enter pairing mode. Press briefly to power on/off (if supported by model).
LED Status Indicators: - Solid Blue: Powered on and connected to a device. - Flashing Blue: In pairing mode, ready to connect. - Solid Red: Charging (if battery model). - Flashing Red: Low battery or connection error. - Off: No power or in standby mode.
Volume and playback controls are managed from your Bluetooth source device (phone, tablet, etc.).
To stream audio, pair the adapter with your Bluetooth device.
Tip: For subsequent use, the adapter will automatically reconnect to the last paired device when both are powered on and in range.
Once paired, you can stream audio from your device.
WARNING! Do not expose the adapter to extreme temperatures or moisture. Keep away from other wireless devices that may cause interference.
Compatible with Bose Wave 3 music system (model numbers: AWRCC1, AWRCC2). Compatible with Bluetooth-enabled devices including: - iOS devices (iPhone, iPad) running iOS 10 or later - Android devices running Android 5.0 or later - Windows 10/11 PCs with Bluetooth - Mac computers with macOS 10.12 or later
Note: Some advanced codecs (aptX, LDAC) are not supported. Audio quality may vary based on source device and streaming service.
Unplug the adapter before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquids, solvents, or abrasive cleaners.
CAUTION! Do not disassemble the adapter. There are no user-serviceable parts inside. Keep the unit away from direct heat sources and water.
FCC ID: [To be filled by manufacturer]. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. IC: [To be filled by manufacturer]. Complies with Industry Canada license-exempt RSS standard(s). Copyright © 2023 Bose Corporation. All trademarks are the property of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No power/LED off | USB power not connected | Check USB cable connections; try a different USB power source. |
| LED flashing blue but device not found | Bluetooth off on source device | Enable Bluetooth on your phone/tablet; ensure it is in pairing mode. |
| Audio distortion or dropouts | Interference or out of range | Move source device closer to adapter; reduce obstacles; avoid Wi-Fi routers. |
| No audio from Bose Wave 3 | Incorrect input selected | Set Bose Wave 3 to AUX input; check 3.5mm cable connections. |
| Adapter not reconnecting automatically | Bluetooth cache issue | Delete "Bose Wave 3 Adapter" from your device's Bluetooth list and re-pair. |
| Low audio volume | Source volume low | Increase volume on source device; then adjust Bose Wave 3 volume. |
Reset: To reset the adapter to factory settings, press and hold the button for 10 seconds until the LED flashes red three times.
Service: For technical support, contact Bose Customer Service at 1-800-999-2673 or visit www.bose.com/support.