Bose VS28 Manual

The Bose VS28 is a versatile home theater speaker system designed for immersive audio experiences. This manual covers essential information for setup, operation, and maintenance of your VS28 system. Below are key sections covering safety, features, installation, configuration, operation, and troubleshooting.

Features at a Glance

Key components: Main control unit, satellite speakers, center channel speaker, subwoofer, remote control, and connection cables.

Feature	Description
Control Unit	Central hub for audio processing and device connections
Satellite Speakers	Four speakers for surround sound channels
Center Channel Speaker	For clear dialogue and front-center audio
Powered Subwoofer	For deep bass frequencies
Remote Control	For system operation and settings adjustment
Audio Inputs	HDMI, optical, coaxial, and analog RCA connections
Power Button	Turns system on/off
Volume Control	Adjusts overall system volume
Input Select	Chooses between connected audio sources
Calibration Button	Initiates automatic room calibration

Installation

Unpack and inspect all components. Choose optimal placement for speakers.

1. Position speakers: Place front speakers at ear level, surround speakers slightly behind listening position.
2. Connect speakers: Use provided cables to connect each speaker to control unit.
3. Connect subwoofer: Place near front speakers and connect to control unit.
4. Connect audio sources: Use appropriate cables to connect TV, Blu-ray player, or other devices.
5. Plug into AC power.

WARNING! Ensure proper ventilation around control unit. Do not place speakers near heat sources.

First-Time Setup

Power on system; follow initialization process.

1. Automatic calibration: Press CALIBRATE button to optimize sound for your room.
2. Input configuration: Assign names to connected devices for easy selection.
3. Volume settings: Set initial volume levels for each speaker channel.
4. Remote programming: Program remote to control other devices if needed.

CAUTION! Keep speaker cables away from power cords to avoid interference.

Specifications

• System Type: 5.1 channel home theater speaker system.
• Total Power: 500 watts RMS.
• Frequency Response: 35Hz - 20kHz.
• Inputs: HDMI (3 in, 1 out), optical (2), coaxial (1), analog RCA (2).
• Wireless: Bluetooth connectivity for streaming.
• Supported Formats: Dolby Digital, DTS, PCM.
• Power Source: 120V AC, 60Hz.
• Dimensions: Control unit: 17.5" W × 2.5" H × 10" D.

Controls and Settings

Access settings via remote control or front panel buttons.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, CALIBRATE, SETTINGS, NUMERIC PAD.

Audio Settings: Bass, treble, center channel level, surround level, subwoofer level. Input Settings: Rename inputs, adjust delay, set default volume. System Settings: Standby mode, remote codes, firmware update. Display: Brightness, on-screen display timeout.

Connecting Devices

HDMI: For modern audio/video sources. Optical/Coaxial: For digital audio. Analog: For legacy devices.

1. Turn off all devices before connecting.
2. Use high-quality cables for best performance.
3. Select input using INPUT button on remote.
4. Configure each input for optimal audio format.

Tip: Use HDMI ARC for simplified TV audio connection.

Audio Calibration

Automatic room calibration optimizes sound for your specific environment.

1. Place calibration microphone at primary listening position.
2. Press CALIBRATE button on remote.
3. System plays test tones through each speaker.
4. Calibration completes in approximately 2 minutes.
5. Save settings when prompted.

Note: Ensure room is quiet during calibration for best results.

Advanced Features

Night Mode: Compresses dynamic range for late-night viewing. Dialogue Enhancement: Boosts center channel for clearer speech. Preset Modes: Movie, Music, Sports, Game. Bluetooth Pairing: Stream audio from mobile devices.

Care & Maintenance

Unplug system before cleaning. Use soft, dry cloth for exterior surfaces. Do not use liquid cleaners.

CAUTION! Never open any speaker or electronic enclosure. Refer servicing to qualified personnel.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Incorrect input selection	Verify correct input is selected; check source device output.
No bass from subwoofer	Connection/level settings	Check subwoofer cable; adjust subwoofer level in settings.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to control unit.
Bluetooth not connecting	Pairing mode/distance	Enable pairing mode on control unit; move device closer.
Distorted sound	Volume too high/damaged cable	Reduce volume; check speaker cables for damage.

Reset: Hold POWER button for 10 seconds to reset to factory defaults.

Service: 1-800-999-2673; www.bose.com/support