Bose Videowave 3 Manual

The Bose Videowave 3 is an advanced home entertainment system combining a high-definition display with integrated Bose sound technology. It features a 46-inch LED-backlit LCD screen, built-in 5.1 channel surround sound with proprietary Bose waveguide technology, HDMI inputs, component video, composite video, optical audio input, Ethernet port, USB port for media playback, and a universal remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Media Playback 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED-backlit LCD panel with integrated Bose sound system, Universal Remote Control, HDMI inputs, Optical audio input, Component video inputs, Ethernet port, USB media port.

FeatureDescription
HDMI Inputs (4 ports)For high-definition video and audio from Blu-ray players, game consoles, etc.
Component Video InputFor standard-definition component video sources
Composite Video InputFor legacy composite video sources
Optical Audio InputFor digital audio from external devices
Ethernet PortFor network connectivity and firmware updates
USB Media PortFor playback of photos, music, and videos from USB drives
POWERTurns system on/off
INPUTCycles through available input sources
VOLUMEAdjusts audio level
MENUAccesses on-screen display menu

Installation

Unpack and inspect all components. Place on a stable, level surface.

  1. Position the system: Ensure adequate ventilation around the unit.
  2. Connect video sources: Use HDMI cables for HD devices; component/composite for legacy devices.
  3. Connect audio sources: Use optical audio cable for external audio devices if needed.
  4. Connect to network: Use Ethernet cable to router for updates and streaming features.
  5. Plug into AC power outlet.

WARNING! The system is heavy; use two people for lifting and placement to avoid injury.

First-Time Setup

Power on the system; follow the on-screen setup wizard.

  1. Select language: Choose preferred language for menus and guides.
  2. Connect to network: Follow prompts to connect via Ethernet or set up Wi-Fi if equipped.
  3. Configure audio: Run the ADAPTiQ audio calibration for optimal sound in your room.
  4. Set up inputs: Label connected devices for easy identification.
  5. Register product: Follow prompts to register your system with Bose.

CAUTION! Ensure the unit is placed on a stable surface away from heat sources.

Specifications

Controls and Settings

Access OSD via MENU button on remote or side panel. Side Panel: POWER, INPUT, VOLUME (+/-), MENU.

Remote: POWER, Numeric buttons, INPUT, VOLUME, MUTE, MENU, GUIDE, EXIT, Navigation arrows, SELECT.

Picture: BRIGHTNESS, CONTRAST, COLOR, TINT, SHARPNESS, Backlight, Color Temperature, Noise Reduction. Audio: ADAPTiQ settings, Bass, Treble, Dialogue Mode, Surround Level. Setup: Language, Network, Input Labeling, Parental Controls (default code 0000). System: Software Update, Factory Reset.

Connecting Devices

HDMI: Recommended for HD devices. Component/Composite: For older devices. Optical Audio: For external audio sources.

  1. Turn off the system and external devices before connecting.
  2. Use high-quality HDMI cables for best performance.
  3. Select input source using INPUT button on remote or side panel (HDMI 1, HDMI 2, etc.).

Tip: Use the input labeling feature in the menu to rename inputs (e.g., "Blu-ray", "Game Console").

Media Playback

Supports USB media playback of photos, music, and videos.

  1. Insert USB drive: Plug into USB port on the side or rear.
  2. Access media: Press MEDIA or SOURCE button; select USB device.
  3. Navigate: Use arrow keys to browse folders and select files.
  4. Playback controls: PLAY/PAUSE, STOP, SKIP FORWARD/BACKWARD.
  5. Photo slideshow: Select photo and choose slideshow option.
  6. Music playback: Supports playlists and shuffle/repeat modes.

WARNING! Safely eject USB drive using the on-screen option before physically removing it.

Accessibility Features

Closed Captions: Enable in SETUP menu (Digital CC, Analog CC). Audio Description: Available when broadcast or encoded on media. Parental Controls: Block content by rating in SETUP menu (default code 0000).

Care & Cleaning

Unplug from power before cleaning. Use a soft, dry microfiber cloth to gently wipe the screen and cabinet. For stubborn smudges, lightly dampen cloth with water only.

CAUTION! Do not use liquid cleaners, sprays, or abrasive cloths. Avoid getting moisture into openings.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. All rights reserved. Bose and Videowave are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletEnsure power cord is securely connected; try a different outlet.
No picture, sound OKInput source/cablesVerify correct input is selected; check HDMI/component cable connections.
No sound, picture OKMute/audio settingsCheck if MUTE is on; verify audio output settings in menu.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear line of sight to IR sensor on system.
USB media not recognizedFormat/compatibilityEnsure USB drive is formatted as FAT32; check file format compatibility.
Network connection issuesCable/settingsCheck Ethernet cable; verify network settings in menu; restart router.

Reset: Menu > System > Factory Reset (note: erases all settings).

Service: 1-800-999-2673; www.bose.com/support

Bose Videowave 3 Manual © - All Rights Reserved 2025