Bose UFS-20 Speaker Stands Manual

The Bose UFS-20 are universal floor speaker stands designed to securely elevate and position bookshelf or satellite speakers for optimal audio performance. They feature a sturdy steel construction, adjustable height, universal mounting plate, integrated cable management, and a stable weighted base. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mounting Speakers 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Steel column, adjustable mounting plate, weighted base, cable management channel, rubber feet, hardware kit.

Feature	Description
Adjustable Height	Column extends from 36" to 48" for optimal positioning
Universal Mounting Plate	Fits most bookshelf/satellite speakers; adjustable screw holes
Weighted Base	Provides stability and prevents tipping
Cable Management	Internal channel hides speaker wires for clean appearance
Rubber Feet	Protects flooring and prevents sliding
Steel Construction	Durable powder-coated finish for long-term use
Hardware Kit	Includes screws, washers, and tools for assembly
Tilt Adjustment	Mounting plate allows slight angle adjustment for sound direction
Easy Assembly	Tool-free height adjustment; minimal parts
Compatibility	Designed for Bose and other brand speakers

Installation

Unpack and inspect all parts. Place on flat, stable surface.

Assemble base: Attach weighted base to steel column using provided bolts.
Adjust height: Loosen collar, extend column to desired height, tighten collar.
Attach mounting plate: Secure plate to top of column with included hardware.
Mount speaker: Place speaker on plate, align screw holes, secure with screws.
Route cables: Thread speaker wire through cable management channel.

WARNING! Stands are heavy; lift with care to avoid injury. Ensure all connections are tight.

First-Time Setup

Position stands for optimal audio performance.

Place stands: Position at listening area, typically beside seating or behind sofa.
Adjust height: Set so speaker tweeters are at ear level when seated.
Angle speakers: Tilt mounting plate to direct sound toward listening position.
Secure speakers: Tighten all screws to prevent movement.
Connect wires: Route cables through channel to amplifier/receiver.

CAUTION! Ensure stable flooring; use on level surface only.

Specifications

Height Range: 36 to 48 inches adjustable.
Material: Powder-coated steel.
Base: Weighted steel, 12-inch diameter.
Mounting Plate: Universal, 6x8 inches with multiple screw holes.
Load Capacity: Supports up to 30 lbs per stand.
Cable Management: Internal channel, 0.5-inch diameter.
Finish: Black matte.
Weight: 15 lbs per stand (unloaded).
Compatibility: Bose 100, 200 series; most bookshelf speakers.

Controls and Settings

Height adjustment: Loosen collar, slide column, tighten collar. Tilt adjustment: Loosen plate screws, adjust angle, retighten.

Tools needed: Included hex key, Phillips screwdriver (optional).

Positioning: Adjust for optimal soundstage. Cable routing: Thread wire through channel, secure with ties. Stability check: Ensure base is flat, all bolts tight.

Connecting Devices

Speaker connection: Standard speaker wire to amplifier/receiver.

Turn off amplifier before connecting.
Strip wire ends, insert into speaker terminals.
Route wire through stand channel to hide.
Connect to amplifier matching polarity (+/-).

Tip: Use wire ties to secure excess cable inside channel.

Mounting Speakers

Supports most bookshelf speakers up to 30 lbs.

Check compatibility: Ensure speaker fits mounting plate.
Align holes: Position speaker over plate, match screw holes.
Secure: Use provided screws; do not overtighten.
Test stability: Gently shake stand to ensure speaker is secure.
Adjust angle: Tilt for optimal sound direction.

WARNING! Do not exceed weight limit. Ensure speaker is centered on plate.

Safety Features

Weighted Base: Prevents tipping. Rubber Feet: Protects floors, reduces vibration. Cable Management: Prevents tripping hazards.

Care & Cleaning

Use dry cloth for dusting. For stains, use mild soap and water on cloth only.

CAUTION! Do not use abrasive cleaners; avoid moisture on steel joints.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Stand wobbles	Uneven floor/loose bolts	Place on level surface; tighten all bolts and collar.
Speaker not secure	Incorrect screws/loose plate	Use provided screws; tighten mounting plate bolts.
Cable won't fit channel	Wire too thick	Use standard gauge speaker wire; do not force.
Height adjustment stuck	Collar too tight/dirt	Loosen collar completely; clean column; re-tighten.
Scratches on floor	Missing rubber feet	Ensure all four rubber feet are attached; use floor protector.

Reset: Disassemble and reassemble if necessary.

Service: 1-800-999-2673; www.bose.com