Bose UB-20 Wall/Ceiling Bracket Manual

The Bose UB-20 is a universal wall/ceiling mounting bracket designed for secure installation of compatible Bose speakers and audio equipment. It features adjustable tilt and swivel capabilities, robust construction with a weight capacity of up to 15 lbs (6.8 kg), integrated cable management, and includes all necessary hardware for mounting on various surfaces (drywall, wood, concrete with appropriate anchors). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Universal mounting plate with keyhole slots, Adjustable arm with tilt (+/- 15°) and swivel (360°) capabilities, Wall plate with integrated bubble level, Cable routing channels, Complete hardware kit.

Package Contents

Unpack and verify all components before installation.

1. UB-20 Bracket Assembly (Wall plate + Adjustable arm)
2. Universal Speaker Mounting Plate
3. Hardware Kit: 8x Mounting screws, 4x Wall anchors, 2x Hex keys
4. Cable Management Clips (set of 4)
5. Installation Template
6. User Manual (this document)

WARNING! Do not discard packaging until installation is complete. Inspect all parts for damage.

Installation Requirements

Tools and materials needed for proper installation.

1. Tools: Power drill, Phillips screwdriver, Stud finder, Pencil, Tape measure, Level.
2. Materials: Appropriate wall anchors if not using included ones (for concrete/tile).
3. Surface Preparation: Ensure wall/ceiling is structurally sound, clean, and dry.
4. Safety Gear: Safety glasses, gloves recommended.

CAUTION! Verify wall structure can support bracket and speaker weight. Use two people for handling during installation.

Specifications

• Model: UB-20 Universal Wall/Ceiling Bracket.
• Weight Capacity: 15 lbs (6.8 kg) maximum.
• Adjustment Range: Tilt ±15°, Swivel 360°.
• Construction: Steel with black powder-coat finish.
• Mounting Patterns: Compatible with standard VESA and Bose mounting points.
• Included Hardware: M4, M6 screws; plastic wall anchors; hex keys.
• Dimensions (Bracket): 8.5" x 5.5" x 3" (216mm x 140mm x 76mm).
• Warranty: 5-year limited warranty.
• Operating Environment: Indoor use only.

Mounting Instructions

Follow these steps for safe and secure installation.

Step 1: Plan Placement Use stud finder to locate studs. Mark desired height (recommended: ear level when seated for optimal sound). Use installation template to mark screw holes.

Step 2: Install Wall Plate Drill pilot holes at marked locations. Insert wall anchors if not mounting into stud. Align wall plate with holes, use bubble level to ensure level. Secure with provided screws.

Step 3: Attach Speaker Connect speaker wires to speaker first. Align speaker with universal mounting plate, secure using appropriate screws from hardware kit. Do not overtighten.

Step 4: Mount Speaker Assembly Lift speaker with bracket attached, engage with wall plate. Listen for click to confirm secure connection. Tighten safety screw if included.

Adjusting the Bracket

Once mounted, adjust for optimal speaker positioning.

1. Tilt Adjustment: Loosen tilt knob on bracket arm, adjust angle (+15° to -15°), retighten knob.
2. Swivel Adjustment: Rotate speaker horizontally to desired direction (360° range).
3. Fine-Tuning: Make small adjustments while playing audio to find optimal sound projection.
4. Locking Position: Ensure all adjustment knobs are firmly tightened after positioning.

Tip: Adjust with speaker powered off to prevent accidental damage to cables.

Cable Management

Integrated channels for neat wire routing.

1. Route speaker wire through cable channel on bracket arm.
2. Use included cable clips to secure wire along arm path.
3. For wall mounting, consider in-wall wiring for cleanest look (consult electrician if needed).
4. Ensure wires are not pinched or strained during adjustments.

WARNING! Do not force cables; ensure proper slack for bracket movement.

Safety Precautions

Read all instructions before installation. Use appropriate anchors for your wall type. Do not exceed 15 lb weight limit. Ensure bracket is securely mounted before attaching speaker. Periodically check tightness of all screws.

Care & Maintenance

Clean with dry, soft cloth only. Do not use liquids or abrasive cleaners. Periodically check all connections and tighten if necessary. Do not hang items on bracket.

CAUTION! Do not use bracket as step or support. Avoid exposure to moisture.

Warranty Information

Bose UB-20 bracket is covered by a 5-year limited warranty against defects in materials and workmanship. Warranty does not cover damage from misuse, improper installation, or unauthorized modification. For warranty service, contact Bose Customer Service with proof of purchase. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Professional Installation: If unsure, consult professional installer.

Service: 1-800-999-2673; www.bose.com/support