Bose TV Solo Sound System Manual

The Bose TV Solo Sound System is a compact, single-unit soundbar designed to enhance TV audio with clear dialogue and immersive sound. It features HDMI ARC connectivity, optical digital input, Bluetooth for wireless streaming, a universal remote, Bose Voice4Video technology for controlling multiple devices, dialogue mode, night mode, and wall-mount capability. Powered by AC adapter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth Streaming 8. Voice4Video Technology 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Soundbar unit, Universal Remote Control, AC Power Adapter, HDMI cable, Optical cable, Wall-mount template.

Feature	Description
HDMI ARC port	For audio return channel from TV; single-cable connection
Optical Digital Input	For connecting TVs or devices with optical audio output
Bluetooth	For wireless streaming from smartphones, tablets, or computers
Universal Remote	Controls TV, cable box, and soundbar; learns IR commands
Dialogue Mode	Enhances speech clarity for clearer TV dialogue
Night Mode	Compresses dynamic range for quieter nighttime listening
Bose Voice4Video	Technology to control multiple devices with one remote
Wall-mount slots	For mounting soundbar below or above TV
Status LED	Indicates power, input, and Bluetooth pairing status
AC Power Adapter	Powers the soundbar; connects to DC input

Installation

Unpack and inspect contents. Place on stable surface below TV or mount on wall.

Connect to TV: Use HDMI ARC (preferred) or optical cable from TV's audio output to soundbar.
Connect power: Plug AC adapter into soundbar and wall outlet.
Position soundbar: Center below TV for optimal sound; ensure no obstructions.
Mount on wall: Use included template to mark screw positions; secure with screws (not included).

WARNING! Ensure wall can support weight; use appropriate anchors. Keep cables away from heat sources.

First-Time Setup

Power on soundbar; follow on-screen prompts if TV supports HDMI-CEC.

Select input: Press INPUT on remote to cycle through HDMI, OPTICAL, BLUETOOTH.
Pair Bluetooth: Press and hold Bluetooth button on remote until LED blinks; select "Bose TV Solo" on device.
Set up Voice4Video: Follow on-screen instructions to program remote for TV and cable/satellite box.
Adjust sound: Use remote to enable Dialogue Mode or Night Mode as needed.

CAUTION! Do not block ventilation openings; allow space for heat dissipation.

Specifications

Dimensions: Approx. 24" wide x 2.5" high x 4" deep.
Audio Output: Integrated full-range drivers with Bose waveguide technology.
Connectivity: HDMI ARC, Optical input, Bluetooth 4.2.
Sound Modes: Dialogue Mode, Night Mode, default TV mode.
Remote: Universal IR learning remote with Voice4Video.
Power: AC adapter (input: 100-240V, 50/60Hz).
Operating Temp: 32°F to 95°F (0°C to 35°C).
Warranty: Limited 1-year warranty.

Controls and Settings

Access settings via remote. Soundbar buttons: POWER, INPUT, BLUETOOTH.

Remote: POWER, INPUT, VOLUME UP/DOWN, MUTE, DIALOGUE MODE, NIGHT MODE, BLUETOOTH, NUMBER PAD (for direct input selection).

Sound Modes: DIALOGUE MODE enhances speech; NIGHT MODE reduces loud sounds. Input Selection: HDMI, OPTICAL, BLUETOOTH. Remote Setup: Program for TV and cable/satellite via Voice4Video setup. Bluetooth: Pair/unpair devices. Reset: Hold POWER on soundbar for 10 seconds to reset to factory defaults.

Connecting Devices

TV: HDMI ARC or optical. Other devices: Bluetooth for wireless audio.

Turn off TV and soundbar before connecting cables.
Use HDMI ARC for simplest setup (single cable for audio and control).
Select input on soundbar to match connection (HDMI, OPTICAL, BLUETOOTH).
Adjust TV settings to output audio via HDMI ARC or optical.

Tip: For best audio quality, use HDMI ARC. Ensure TV supports ARC or eARC.

Bluetooth Streaming

Stream audio from compatible Bluetooth devices.

Enable Bluetooth: Press BLUETOOTH button on remote; LED blinks blue.
Pair device: On smartphone/tablet, go to Bluetooth settings, select "Bose TV Solo".
Play audio: Start playback on device; sound outputs through soundbar.
Disconnect: Press and hold BLUETOOTH button or turn off Bluetooth on device.
Multiple devices: Soundbar remembers up to 8 devices; connects to last used.

WARNING! Keep Bluetooth devices within 30 feet for stable connection. Interference may occur near other wireless devices.

Voice4Video Technology

Control TV, cable/satellite box, and soundbar with one remote.

Initial setup: Follow on-screen prompts to program remote for TV and cable box.
Volume control: Remote adjusts soundbar volume by default.
Input control: Press INPUT to change soundbar input; remote may switch TV input automatically.
Reprogramming: Hold TV and CABLE buttons simultaneously for 5 seconds to re-enter setup.

Note: Voice4Video requires IR line-of-sight; ensure remote points at devices.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth; avoid liquids, sprays, or abrasives.

CAUTION! Do not use solvents; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. HDMI, HDMI ARC, and High-Definition Multimedia Interface are trademarks of HDMI Licensing LLC. Copyright © 2023 Bose Corporation; all rights reserved. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from soundbar	Input/connection	Ensure correct input selected; check HDMI/optical cable connections; increase volume.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode (LED blinks blue); move device closer; remove obstacles.
Remote not working	Batteries/obstructions	Replace batteries; ensure line-of-sight to soundbar and devices; reprogram if needed.
Dialogue unclear	Sound mode	Enable Dialogue Mode; adjust TV audio settings to output PCM stereo.
HDMI ARC not working	TV settings/cable	Enable HDMI-CEC/ARC on TV; use high-speed HDMI cable; try different HDMI port.

Reset: Hold POWER button on soundbar for 10 seconds to factory reset.

Service: 1-800-999-2673; www.bose.com/support