Bose ToneMatch Manual

The Bose ToneMatch system is an advanced audio processing technology designed to optimize sound quality for various instruments and vocal applications. It features preset EQ settings, feedback suppression, and tone shaping tools to deliver professional-grade audio performance. Below are key sections covering features, setup, operation, and troubleshooting.

Features at a Glance

Key components: ToneMatch processor, remote control, input/output ports, preset selection buttons, LCD display.

Feature	Description
ToneMatch processor	Advanced DSP for instrument and vocal optimization
Input ports	XLR/TRS combo jacks for microphones and instruments
Output ports	XLR and 1/4" outputs for connecting to mixers or speakers
Preset selection	Quick-access buttons for instrument/vocal presets
LCD display	Shows preset name, settings, and levels
Feedback suppression	Automatic detection and reduction of feedback
EQ controls	Parametric and graphic EQ adjustments
USB port	For firmware updates and computer connection
Power input	DC power connector
Headphone output	For private monitoring

Installation & Setup

Unpack and inspect all components. Place unit on stable surface or mount in rack.

1. Connect power: Use included power adapter to DC input.
2. Connect audio sources: Use XLR or 1/4" cables to input ports.
3. Connect outputs: Use XLR cables to mixer or powered speakers.
4. Connect headphones: For personal monitoring if needed.
5. Power on unit: Press power button on front panel.

WARNING! Ensure proper ventilation; do not block cooling vents. Use appropriate cables for connections.

First-Time Configuration

Power on unit; follow initial setup procedure.

1. Select language: Use navigation buttons to choose preferred language.
2. Calibrate inputs: Connect each source and set appropriate gain levels.
3. Choose presets: Select appropriate ToneMatch preset for each input.
4. Save settings: Store configurations to memory slots.
5. Test outputs: Verify audio through connected speakers/monitors.

CAUTION! Set gain levels carefully to avoid clipping and equipment damage.

Specifications

• Processor: 32-bit floating point DSP
• Inputs: 4 XLR/TRS combo jacks, phantom power (48V)
• Outputs: 2 XLR, 2 1/4" TRS, headphone out
• Frequency Response: 20Hz - 20kHz (±0.5dB)
• THD+N: <0.005% @ 1kHz
• Dynamic Range: >110dB
• Sample Rate: 48kHz
• Power Supply: 12V DC, 2A
• Dimensions: 19" rack mount (1U height)
• Weight: 3.5 kg (7.7 lbs)

Controls and Settings

Front panel: POWER, PRESET buttons, NAVIGATION controls, ENTER, BACK, LCD display.

Remote Access: Via USB connection to computer software.

Input Settings: Gain, phantom power, pad (-20dB), high-pass filter. ToneMatch Presets: Acoustic guitar, electric guitar, bass, male vocal, female vocal, keyboard, etc. EQ Controls: 4-band parametric EQ per channel. Dynamics: Compression, gate, limiter. Output Settings: Level, polarity, delay. System: Language, display brightness, auto-standby.

Connecting Devices

Microphones: XLR to input ports. Instruments: 1/4" TRS cables. Speakers: XLR or TRS to outputs.

1. Power off all devices before connecting.
2. Use balanced cables for best noise rejection.
3. Enable phantom power only for condenser microphones.
4. Set appropriate input pad for high-output sources.
5. Select correct preset for each input source.

Tip: Label cables and inputs for easy identification during setup.

Using ToneMatch Presets

Optimized settings for various instruments and vocal types.

1. Select input: Press input select button.
2. Choose preset: Navigate through categories (GUITAR, VOCAL, etc.).
3. Load preset: Press ENTER to apply.
4. Adjust parameters: Modify EQ, compression, effects as needed.
5. Save custom: Store modified preset to user memory slot.
6. A/B comparison: Toggle between original and modified settings.
7. Global bypass: Disable all processing for dry signal comparison.

WARNING! Always monitor levels when applying compression or effects.

Advanced Features

Feedback Suppression: Automatic detection and notch filtering. Scene Memory: Store and recall complete setups. MIDI Control: External control via MIDI commands. Software Integration: Computer control via USB connection.

Care & Maintenance

Power off and disconnect before cleaning. Use soft, dry cloth only; avoid liquids.

CAUTION! Do not use chemical cleaners; keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class A digital device; complies with applicable regulations. CE marked for European compliance. Copyright © 2025 Bose Corporation; all rights reserved. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No audio output	Power/connections	Check power connection; verify input/output cables; ensure unit is powered on.
Distorted sound	Input clipping	Reduce input gain; engage pad if source is too hot; check preset settings.
No phantom power	Setting/connection	Enable phantom power in menu; check microphone compatibility; test with different cable.
Preset not loading	Memory/software	Reset to factory defaults; update firmware; reload presets from backup.
Feedback issues	Placement/settings	Reposition microphones/speakers; adjust EQ; enable feedback suppression.
Display not working	Power/backlight	Check power supply; adjust display brightness; reset unit.

Factory Reset: Hold PRESET 1 + POWER during startup.

Service: 1-800-999-2673; www.bose.com/support