Bose Speaker Remote Control Manual

The Bose Speaker Remote Control is a universal or model-specific infrared (IR) or radio frequency (RF) remote designed to operate compatible Bose speakers and audio systems. It typically features power on/off, volume control, mute, source selection, playback controls (play/pause, skip, etc.), preset buttons, and may include Bluetooth pairing or system grouping functions. Below are key sections for overview, features, setup, operation, troubleshooting, and specifications.

1. Features at a Glance 2. Package Contents 3. Initial Setup & Pairing 4. Remote Control Layout 5. Basic Operations 6. Advanced Functions 7. Battery Replacement 8. Care & Maintenance 9. Troubleshooting 10. Specifications & Compliance

Features at a Glance

Key components: Ergonomic remote control with button interface, IR/RF transmitter, battery compartment.

Feature	Description
Power	Turns connected Bose speaker/system on or off
Volume Up/Down	Adjusts audio output level
Mute	Instantly silences audio
Source/Input Select	Cycles between audio sources (e.g., Bluetooth, AUX, WiFi)
Playback Controls	Play/Pause, Next Track, Previous Track
Preset Buttons	Quick-select saved favorite stations or playlists
Bluetooth Pairing	Initiates pairing mode for Bluetooth-enabled speakers
Group/Ungroup	For multi-room systems, groups or ungroups speakers
Backlight (on some models)	Illuminates buttons in low light
Battery Indicator	Low battery warning via LED or system message

Package Contents

Unpack and verify all items are present.

Bose Remote Control (model number varies)
Two AAA batteries (may be pre-installed or separate)
Quick Start Guide
Safety and Compliance leaflet

NOTE: If any item is missing or damaged, contact Bose customer support.

Initial Setup & Pairing

Ensure your Bose speaker is powered on and in standby mode.

Insert Batteries: Open battery compartment on rear of remote, insert two AAA batteries observing correct polarity (+/-).
Power On Speaker: Turn on your Bose speaker using its power button.
Automatic Pairing (RF models): Many Bose RF remotes pair automatically when batteries are inserted and speaker is on. A confirmation tone or light may indicate success.
IR Remote Aiming: For infrared (IR) remotes, point the remote directly at the speaker's IR sensor (usually on front or top) within a clear line of sight, up to 30 feet away.
Test Basic Functions: Press Power, then Volume Up to confirm remote is operating the speaker.

TIP: Remove any plastic film from the remote's battery contacts before first use.

Remote Control Layout

Top section: Power button. Central cluster: Volume Up/Down, Mute, Source. Lower section: Play/Pause, Next, Previous, Preset buttons (1-6). Side/Edge: Bluetooth button, Group button.

Button Functions:
Power: Toggles speaker power.
Volume +/-: Adjusts level in small increments; hold for rapid change.
Mute: Toggles audio on/off; press again or adjust volume to unmute.
Source: Cycles inputs: Bluetooth → AUX → WiFi (varies by system).
Play/Pause: Controls playback of streaming audio or connected device.
Next/Previous: Skips forward or back one track.
Presets (1-6): Hold to save current station/source; press to recall.
Bluetooth: Press and hold to enter pairing mode (LED blinks).
Group: In multi-room systems, selects speakers to group for synchronized playback.

Basic Operations

Daily use commands for audio control.

Turning On/Off: Press POWER. Speaker will chime or light up.
Adjusting Volume: Press VOLUME + or -.
Muting: Press MUTE. Press again or adjust volume to resume sound.
Changing Source: Press SOURCE repeatedly until desired input is selected (indicated by voice prompt or light color).
Playback Control: With audio playing from a connected device, use PLAY/PAUSE, NEXT, PREVIOUS.
Using Presets: To save, tune to desired station/source, hold a PRESET button (1-6) until confirmation sound. To recall, press the saved PRESET button.

REMINDER: For IR remotes, maintain clear line of sight to the speaker.

Advanced Functions

Features for enhanced system control.

Bluetooth Pairing: Press & hold BLUETOOTH button on remote until speaker's Bluetooth LED blinks. On your phone/tablet, go to Bluetooth settings, select the Bose speaker name to connect.
Multi-Room Grouping (SoundTouch/Home Speaker systems): Press GROUP button, then use remote to select which rooms to include in the group. Audio will play in sync across grouped speakers.
Sleep Timer: Access via Bose app; some remotes allow setting by holding a combination (e.g., MUTE + PRESET 1).
Factory Reset (Remote): If unresponsive, remove batteries, press and hold POWER button for 15 seconds, reinsert batteries.

Battery Replacement

Replace batteries when remote becomes unresponsive or low battery indicator appears.

Slide open or remove the battery compartment cover on the back of the remote.
Remove old batteries, observing polarity.
Insert two new AAA batteries, ensuring + and - match markings.
Replace cover.
Test remote operation.

WARNING: Use only AAA alkaline batteries. Do not mix old and new batteries or different types. Dispose of old batteries properly.

Care & Maintenance

Unplug speaker (if applicable) before cleaning remote. Use a soft, dry cloth. For stubborn marks, slightly dampen cloth with water; do not use solvents or abrasives.

CAUTION: Keep remote dry. Avoid extreme temperatures. Do not disassemble.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction, out of range	Replace batteries; ensure clear line of sight (IR); move within 30 ft (RF).
Buttons unresponsive	Battery contacts dirty, need re-pairing	Clean battery contacts with dry cloth; re-pair remote to system (see manual).
Cannot control volume	Speaker in fixed output mode, mute on	Check source device volume; ensure speaker not muted; toggle mute.
Bluetooth pairing fails	Device not in pairing mode, interference	Hold Bluetooth button until LED blinks; move devices closer; reduce interference.
Presets not saving	Invalid source, memory full	Ensure source is savable (e.g., radio station); try a different preset slot.
Intermittent operation	Weak batteries, RF interference	Replace batteries; move router/cordless phone away from speaker/remote.

Reset: For persistent issues, reset remote (remove batteries, hold POWER 15 sec) and reset speaker per its manual.

Specifications & Compliance

Model: Bose Universal/SoundTouch Remote (specific model number on battery door).
Technology: Infrared (IR) or Radio Frequency (RF) at 2.4 GHz.
Range: Up to 30 feet (9 meters) typical, line-of-sight for IR.
Battery: 2 x AAA alkaline (included).
Compatibility: Designed for Bose speakers and systems (check Bose website for list).
Operating Temperature: 32°F to 104°F (0°C to 40°C).
FCC Compliance: This device complies with Part 15 of FCC rules. Operation subject to conditions: (1) not cause harmful interference, (2) accept any interference received.
Support: For assistance, visit www.bose.com/support or contact Bose Customer Service.