bose soundlink usb key manual

The Bose SoundLink USB Key is a compact audio adapter designed to provide high-quality wireless audio streaming from your computer to compatible Bose SoundLink speakers. It enables easy setup for Bose SimpleSync technology, allowing you to sync audio across multiple Bose devices. Below are key sections covering features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Bose SimpleSync 8. Software & Updates 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: USB Key adapter, Bose SimpleSync technology support, Plug-and-play design, Status LED indicator.

Feature	Description
USB Key adapter	Compact USB-A connector for computer connection
Bose SimpleSync technology	Sync audio with compatible Bose SoundLink speakers
Plug-and-play design	No drivers required for most operating systems
Status LED indicator	Shows connection and power status
Wireless audio streaming	Streams audio from computer to SoundLink speakers
Compatible with Bose Music app	For device management and settings
Compact form factor	Small size for easy portability
Automatic connection	Pairs automatically with pre-configured speakers
Multi-device support	Can sync with multiple Bose speakers
Audio passthrough	Allows computer audio to route through connected speakers

Installation

Unpack and inspect contents. Ensure computer meets system requirements.

Check compatibility: Verify computer has USB-A port and meets system requirements.
Insert USB Key: Plug the USB Key directly into an available USB port on your computer.
Wait for recognition: Operating system should detect device automatically.
Install software if prompted: Some systems may require Bose software installation.

WARNING! Do not force the USB Key into port; insert gently to avoid damage. Ensure computer is powered on.

First-Time Setup

After installation, configure for use with Bose SoundLink speakers.

Install Bose Music app: Download from official website or app store.
Power on SoundLink speaker: Ensure speaker is in pairing mode.
Open Bose Music app: Follow prompts to add new device.
Select USB Key: App should detect USB Key; follow setup instructions.
Test audio: Play audio from computer to verify streaming to speaker.

CAUTION! Keep USB Key away from liquids and extreme temperatures during setup.

Specifications

Dimensions: Compact USB-A form factor.
Connectivity: USB 2.0/3.0 compatible.
Wireless Technology: Proprietary Bose wireless protocol.
Compatibility: Windows 10+, macOS 10.14+, select Bose SoundLink speakers.
Power: Powered via USB port; no external power required.
LED Indicators: Solid/Blinking for status indication.
Operating Range: Up to 30 feet (9 meters) in open space.
Supported Audio Formats: Standard computer audio formats.
Weight: Minimal; less than 0.5 oz (15g).

Controls and Settings

Primary control through Bose Music app or computer audio settings.

Bose Music App: Device management, SimpleSync setup, audio settings, firmware updates.

Computer Audio Settings: Select USB Key as audio output device. Adjust volume through system volume control.

LED Status: Solid blue = Connected and active; Blinking blue = Pairing/connecting; Off = No power/not connected.

SimpleSync Settings: Add/remove speakers, adjust sync delay, manage grouped playback.

Connecting Devices

Connect USB Key to computer and pair with Bose SoundLink speakers.

Ensure SoundLink speaker is powered on and in wireless mode.
Insert USB Key into computer USB port.
Open Bose Music app on smartphone or tablet.
Follow app instructions to pair USB Key with speaker.
Set computer audio output to Bose SoundLink USB Key.

Tip: For best performance, keep USB Key and speaker within 30 feet without obstructions.

Using Bose SimpleSync

Sync audio across multiple compatible Bose speakers.

Ensure all speakers are powered on and connected to same network.
Open Bose Music app and navigate to SimpleSync section.
Select USB Key as source device.
Choose speakers to sync from available list.
Adjust sync settings if needed for audio delay.
Play audio from computer; it will stream to all synced speakers.
To unsync: Use app to remove speakers from group.

WARNING! Do not remove USB Key while audio is streaming to avoid audio interruption.

Software & Updates

Keep USB Key firmware updated for best performance.

Check for updates via Bose Music app: App > Settings > Product Updates. Install updates when prompted. Updates may improve connectivity, add features, or fix issues.

Care & Cleaning

Unplug from computer before cleaning. Use dry, soft cloth only; no liquids or cleaners.

CAUTION! Do not expose to moisture; store in dry place when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; trademarks owned by Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service. This device complies with relevant wireless regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
USB Key not recognized	USB port/connection issue	Try different USB port; ensure secure connection; restart computer.
No audio from speaker	Connection/volume settings	Verify speaker is on and paired; check computer audio output settings; adjust volume.
Audio delay/lip sync issues	SimpleSync settings	Adjust sync delay in Bose Music app; ensure all devices updated.
Cannot connect to speaker	Distance/obstructions	Move closer to speaker; remove obstructions; restart both devices.
LED not lighting	Power/USB issue	Check USB port functionality; try different computer; contact support if persists.
SimpleSync not working	Network/compatibility	Ensure speakers compatible with SimpleSync; check network connectivity; update firmware.

Reset: Unplug USB Key for 10 seconds, then reinsert. For speaker, use reset function in Bose Music app.

Service: Contact Bose Customer Support; www.bose.com/support