Bose SoundLink Revolve Manual

The Bose SoundLink Revolve is a portable Bluetooth speaker featuring 360-degree sound, water-resistant design (IPX4), built-in microphone for speakerphone calls, voice prompts, and up to 12 hours of battery life. It supports Bluetooth pairing with NFC, AUX input, and USB charging. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. What's in the Box 3. Getting Started 4. Specifications 5. Controls and Indicators 6. Bluetooth Pairing 7. Using the Speakerphone 8. Charging the Battery 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Cylindrical speaker unit, Control buttons, Microphone, Charging port, AUX input, USB charging port.

FeatureDescription
360-degree soundDelivers consistent audio coverage in all directions
Bluetooth connectivityWireless pairing with smartphones, tablets, and computers
NFC pairingTap-to-pair with compatible NFC devices
Water resistance (IPX4)Protected against splashing water from any direction
Built-in microphoneFor speakerphone calls and voice assistant access
AUX input3.5mm audio input for wired connections
USB charging portMicro-USB port for charging the battery
Voice promptsAudible guidance for power, battery, and connection status
Multi-connectRemembers up to 8 paired devices
Battery lifeUp to 12 hours of playtime per charge

What's in the Box

Unpack and verify all contents are present.

  1. Bose SoundLink Revolve speaker
  2. USB charging cable (Micro-USB)
  3. Power adapter
  4. Quick Start Guide
  5. Safety and Warranty Information

NOTE: If any item is missing or damaged, contact Bose customer support.

Getting Started

Prepare your speaker for first use.

  1. Charge the speaker: Connect the USB cable to the speaker and power adapter, then plug into an outlet.
  2. Power on: Press and hold the Power button until you hear the power-on tone and see the battery indicator light.
  3. Pair your device: Activate Bluetooth on your device and select "Bose SoundLink Revolve" from the list.
  4. Adjust volume: Use the volume buttons on the speaker or your connected device.

CAUTION! Use only the provided power adapter and cable. Do not expose to excessive heat or moisture during charging.

Specifications

Controls and Indicators

Top Panel Controls: Power, Bluetooth, Volume Up/Down, Multi-function button (play/pause, answer/end calls, voice assistant).

Indicator Lights: Battery status (green = good, amber = medium, red = low, flashing red = charge immediately), Bluetooth (flashing blue = pairing, solid blue = connected).

Voice Prompts: Indicate power on/off, battery level, device connected/disconnected, and pairing mode.

Bluetooth Pairing

Pair with your Bluetooth-enabled device.

  1. Turn on speaker: Press and hold Power button.
  2. Enter pairing mode: Press and hold Bluetooth button until you hear "Ready to pair" and the Bluetooth light flashes blue.
  3. On your device: Enable Bluetooth and select "Bose SoundLink Revolve" from the list.
  4. For NFC pairing: Tap your NFC-enabled device to the NFC symbol on the speaker (if supported).

Tip: To pair with another device, press the Bluetooth button briefly to disconnect the current device, then follow pairing steps again.

Using the Speakerphone

Make and receive calls hands-free.

  1. When a call comes in: Press the Multi-function button to answer.
  2. During a call: Press Volume buttons to adjust call volume.
  3. To end a call: Press the Multi-function button.
  4. To reject a call: Press and hold the Multi-function button for 2 seconds.
  5. To redial last number: Press the Multi-function button twice quickly.
  6. To activate voice assistant (Siri/Google Assistant): Press and hold the Multi-function button until you hear a tone.

NOTE: Ensure the speaker is within 3 feet of you for optimal microphone performance during calls.

Charging the Battery

Monitor and maintain battery life.

  1. Connect the USB cable to the speaker's charging port and the power adapter.
  2. Plug the adapter into a wall outlet. The battery indicator will glow amber while charging.
  3. When fully charged, the indicator will turn green (approximately 4 hours).
  4. To check battery level: Press the Power button briefly. Voice prompt will announce level (High/Medium/Low).

WARNING! Do not use damaged charging cables or adapters. Charge only in dry conditions.

Care & Maintenance

Keep your speaker in optimal condition.

Cleaning: Use a soft, dry cloth. For stubborn stains, dampen cloth with water only. Do not use solvents or abrasive cleaners.

Storage: Store in a cool, dry place. Avoid extreme temperatures and direct sunlight.

CAUTION! Although water-resistant, do not submerge the speaker. Do not expose to liquids under pressure (e.g., shower jets).

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. ICES-003: Complies with Canadian ICES-003. Copyright © Bose Corporation. All rights reserved. Bose and SoundLink are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
Speaker won't turn onBattery depletedCharge speaker for at least 30 minutes before use.
Bluetooth connection failsOut of range/interferenceMove devices closer (within 30 ft); turn off other Bluetooth devices.
Poor sound qualityObstructions/low batteryRemove obstacles between speaker and source; recharge battery.
Speakerphone not workingMicrophone blockedEnsure microphone area is clean and unobstructed.
Battery drains quicklyHigh volume/old batteryReduce volume; if problem persists, battery may need replacement.

Reset: Press and hold Power and Volume Down buttons for 10 seconds to reset to factory settings.

Service: 1-800-999-2673; www.bose.com/support

Bose SoundLink Revolve Manual © - All Rights Reserved 2025