Bose SoundLink Mobile II Manual

The Bose SoundLink Mobile II is a portable Bluetooth speaker designed for high-quality audio on the go. It features advanced Bose audio technology, Bluetooth connectivity for wireless streaming, a built-in rechargeable battery providing up to 8 hours of playtime, a 3.5mm auxiliary input, a USB port for charging devices, voice prompts for easy pairing, and a durable, water-resistant design. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Unpacking and Contents 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Connecting Devices 7. Using the Speaker 8. Voice Prompts and Alerts 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Speaker unit, Power/Bluetooth button, Volume controls, Auxiliary input, USB port, Battery status LED, Microphone for calls.

Feature	Description
Bluetooth Connectivity	Wirelessly stream audio from smartphones, tablets, and computers
Rechargeable Battery	Provides up to 8 hours of playtime on a full charge
Auxiliary Input	3.5mm jack for connecting non-Bluetooth devices
USB Port	Can be used to charge your mobile devices
Voice Prompts	Audible guidance for Bluetooth pairing and status
Water-Resistant Design	Protects against splashes and light rain (IPX4 rating)
Multi-Point Pairing	Remembers up to 8 devices and can connect to 2 simultaneously
Built-in Microphone	For hands-free phone calls
Power/Battery Button	Turns speaker on/off and indicates battery status
Volume Controls	Adjust speaker volume independently from source device

Unpacking and Contents

Unpack and inspect contents. Ensure all items are present.

Bose SoundLink Mobile II speaker.
USB charging cable.
Wall charger (region specific).
Quick Start Guide.
Safety and Warranty information.

WARNING! Keep plastic bags away from children to avoid suffocation hazard. Inspect for any shipping damage.

First-Time Setup

Charge the speaker fully before first use.

Charge: Connect the USB cable to the speaker and a power source. The battery LED will pulse while charging and glow solid when full.
Power On: Press and hold the Power/Bluetooth button until you hear the power-on tone and the Bluetooth LED blinks blue.
Pair Device: Enable Bluetooth on your phone/tablet. Select "Bose SoundLink Mobile II" from the list of available devices. You will hear a confirmation tone.
Adjust Volume: Use the volume buttons on the speaker or your source device.

CAUTION! Use only the provided or Bose-approved charging accessories.

Specifications

Dimensions: Varies by model, compact and portable.
Bluetooth Version: 4.1 with A2DP, AVRCP, HFP, HSP profiles.
Battery Life: Up to 8 hours (varies by volume and content).
Charging Time: Approximately 3 hours for a full charge.
Inputs: 3.5mm auxiliary, Micro-USB for charging.
Output: USB port (5V/1A) for charging devices.
Water Resistance: IPX4 (splash resistant).
Operating Range: Bluetooth range up to 30 feet (10 meters).
Weight: Lightweight for easy portability.

Controls and Indicators

Access controls on the top or side of the speaker.

Buttons: Power/Bluetooth (press to turn on/off, press and hold to enter pairing), Volume Up (+), Volume Down (-).

LED Indicators: Battery/Bluetooth LED (Blue blinking: Ready to pair. Solid blue: Connected. Amber blinking: Battery low. Solid amber: Charging. Off: Powered off or fully charged).

Ports: Auxiliary Input (3.5mm), Micro-USB Charging Port, USB Output Port.

Connecting Devices

Bluetooth: Primary wireless method. Auxiliary: For wired connection.

For Bluetooth: Put speaker in pairing mode (blinking blue LED). Select it on your device's Bluetooth list.
For Auxiliary: Use a 3.5mm audio cable to connect your device to the speaker's AUX IN jack. The speaker will automatically switch to auxiliary input.
To switch between sources: Pause playback on the current source. The speaker will automatically seek the other active source (Bluetooth takes priority if both are active).

Tip: For best Bluetooth performance, keep the source device within 30 feet and free of obstructions.

Using the Speaker

Supports music streaming and hands-free calls.

Play/Pause: Control from your source device. Some models support a single press of the Power/Bluetooth button to play/pause music.
Skip Tracks: Use the controls on your source device.
Answer/End Call: When a call comes in, press the Power/Bluetooth button once to answer. Press again to end the call.
Reject Call: Press and hold the Power/Bluetooth button for two seconds.
Volume: Use the speaker's volume buttons for independent control.
Battery Check: Press the Power/Bluetooth button briefly while the speaker is on. A voice prompt will announce the battery level.

WARNING! Do not expose the speaker to excessive heat or submerge it in water. The USB port is for charging only, not for audio data.

Voice Prompts and Alerts

Voice prompts guide you through operation (language is set by your connected device's Bluetooth settings).

"Ready to connect" or "Bluetooth device connected".
"Battery high", "Battery medium", "Battery low".
"Power on", "Power off".
"Auxiliary input connected".

To disable/enable voice prompts: Turn off the speaker. Press and hold the Volume Down (-) and Power/Bluetooth buttons simultaneously for about 10 seconds until you hear a tone. Voice prompts will be toggled.

Care & Maintenance

Unplug charging cable before cleaning. Use a soft, dry cloth. For stubborn stains, dampen cloth slightly with water.

CAUTION! Do not use harsh chemicals, solvents, or abrasive cleaners. Do not allow moisture to enter any openings. Store in a cool, dry place.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. IC Compliance: Complies with Industry Canada licence-exempt RSS standard(s). Contains FCC ID: XXXXXXXXX and IC: XXXX-XXXXXXXX. For support, visit www.bose.com/support or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Speaker won't turn on	Battery depleted	Connect to power source and charge for at least 30 minutes before trying again.
Can't pair Bluetooth device	Out of range/not in pairing mode	Move devices closer. Put speaker in pairing mode (blinking blue LED). Delete old pairing from your device's list and try again.
Audio cuts out or is choppy	Bluetooth interference/low battery	Move speaker and source device closer together. Away from Wi-Fi routers, microwaves. Charge the speaker.
No sound from auxiliary input	Cable not fully inserted/input not selected	Ensure cable is securely connected at both ends. Pause any Bluetooth audio; the speaker should auto-switch to AUX.
Battery charges slowly or not at all	Faulty cable/power source	Use the provided cable and a wall charger (computer USB port may provide less power). Try a different outlet.
Speaker doesn't respond to button presses	Software issue	Reset the speaker: Turn it off. Press and hold the Mute and Volume Down buttons (if available) or Power button for 10 seconds (consult manual for exact reset procedure).

Reset: If issues persist, perform a factory reset (procedure may vary; see full manual).

Service: www.bose.com/support or contact Bose Customer Service.