Bose SoundDock Series II PDF Manual

The Bose SoundDock Series II is a premium digital music system designed for iPod and iPhone, featuring Bose-engineered acoustics, a dock connector for direct playback and charging, an auxiliary input for other audio sources, a remote control, and a compact, elegant design. Below are key sections covering setup, features, operation, connectivity, care, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Connecting Your Device 7. Using the Remote Control 8. Auxiliary Input 9. Care & Maintenance 10. Regulatory & Support 11. Troubleshooting

Features at a Glance

Key components: SoundDock Series II speaker system, Remote Control, Power Cord, Dock Adapters for various iPod/iPhone models.

Feature	Description
Acoustic Design	Bose proprietary waveguide technology for full, clear sound
iPod/iPhone Dock	Direct connection for audio playback and device charging
Auxiliary Input	3.5mm jack for connecting other audio sources (e.g., MP3 players)
Remote Control	Controls power, volume, playback, and track selection
Power Supply	Integrated for global voltage compatibility (100-240V)
Status Indicator	LED shows power and charging status
POWER	Turns system on/off
VOLUME +/-	Adjusts audio level
PLAY/PAUSE	Controls playback on docked device
TRACK +/-	Skips forward/backward through tracks

Unpacking and Setup

Carefully unpack all components. Place the SoundDock on a stable, flat surface.

Connect Power: Plug the power cord into the rear port and into a wall outlet.
Select Dock Adapter: Choose the correct insert for your iPod or iPhone model.
Install Adapter: Gently press the adapter into the dock until it clicks into place.
Position System: Ensure adequate ventilation; keep away from heat sources.

WARNING! Use only the provided power supply. Do not place heavy objects on the system.

First-Time Use

Power on the SoundDock; the status LED will illuminate.

Dock Your Device: Remove any protective case and insert your iPod/iPhone firmly into the dock.
Charging: The device will begin charging automatically (charging LED indicator).
Play Music: Use the device controls or the remote to start playback.
Adjust Volume: Use the remote or the volume buttons on the device.

CAUTION! Ensure the dock adapter is correctly installed to avoid damage to your device connector.

Specifications

Model: Bose SoundDock Series II Digital Music System.
Compatibility: iPod models with dock connector; iPhone (check Bose website for latest list).
Audio Inputs: Proprietary iPod dock; 3.5mm auxiliary input.
Output Power: Not specified; proprietary Bose amplification.
Frequency Response: Not specified; optimized for music reproduction.
Remote Control: Infrared, requires line-of-sight.
Power Requirements:100–240 V AC, 50/60 Hz (auto-sensing).
Dimensions: Compact design; refer to product label for exact measurements.
Weight: Lightweight yet sturdy construction.

Controls and Indicators

System: Power button on rear. Status LED (front): Green = On/Charging, Amber = Standby/Charge Complete, Flashing = Error/No Device.

Remote: POWER, VOLUME +/-, PLAY/PAUSE, TRACK +/-, MUTE (if applicable).

Operation: Dock your device for automatic audio routing. Use remote for primary control. Volume adjusts both system output and, on some models, the device volume simultaneously. The status LED provides feedback on power and charging state.

Connecting Your Device

iPod/iPhone: Use the dock with appropriate adapter. Auxiliary: Use 3.5mm cable from other device's headphone jack to SoundDock AUX IN.

Ensure SoundDock is powered on.
For dock: Insert device firmly. For AUX: Connect cable and select 'AUX' mode if required (some models auto-detect).
Start playback on the source device.

Tip: For best audio quality, set the source device volume to about 75% and use the SoundDock remote for final volume adjustment.

Using the Remote Control

Point the remote at the front of the SoundDock (IR sensor).

Power: Turns system on/off (places docked device in standby).
Play/Pause: Controls playback of docked iPod/iPhone.
Track +/-: Skips to next or previous song.
Volume +/-: Increases or decreases sound level.
Mute: Instantly silences audio (if function available).

Note: Remote functions may vary slightly depending on the docked iPod/iPhone model and software version.

Auxiliary Input

Connect non-Apple devices via the 3.5mm AUX IN jack on the rear.

Use a standard 3.5mm stereo audio cable.
Connect one end to the headphone/output jack of your device.
Connect the other end to the AUX IN on the SoundDock.
The SoundDock may automatically switch to the auxiliary source when a cable is connected and audio is detected.
Control playback and volume primarily from the source device.

WARNING! Do not connect the AUX input to a line-level output that exceeds standard consumer audio levels.

Care & Maintenance

Unplug the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. For stubborn marks, lightly dampen the cloth with water.

CAUTION! Do not use abrasive cleaners, solvents, or aerosols. Do not allow moisture to enter any openings. Keep the dock connector clean and free of debris.

Regulatory & Support

FCC Compliance: This device complies with Part 15 of the FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose and SoundDock are trademarks of Bose Corporation. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. For the latest compatibility information, software updates, and support, visit www.bose.com/support or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / LED off	Power connection	Ensure power cord is securely connected at both ends and the outlet is live.
No sound from docked device	Device not seated / Volume	Re-seat device firmly; check device volume and mute status; ensure correct dock adapter.
Remote not working	Batteries / Obstructions	Replace remote batteries; ensure clear line-of-sight to SoundDock front.
Device not charging	Adapter / Dock connection	Verify correct dock adapter is used; clean dock connector; try a different USB power source to test device.
Distorted sound / Low volume	Source volume / Connection	Adjust source device volume level; check auxiliary cable connections for damage.
SoundDock turns off unexpectedly	Auto-standby / Power save	Some models enter standby after periods of inactivity; press POWER to wake.

Reset: Unplug the power cord for 60 seconds, then reconnect. Re-dock your device.

Service: For persistent issues, contact Bose Customer Support or visit www.bose.com/support.