Bose SoundDock Series 111 Manual

The Bose SoundDock Series 111 is a premium digital music system designed for use with iPod and iPhone devices. It features Bose proprietary waveguide speaker technology for enhanced audio performance, a dock connector for direct digital audio transfer and charging, auxiliary input for other audio sources, remote control, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Music 8. Remote Control 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker system, Universal dock for iPod/iPhone, Remote Control, Auxiliary input, Power adapter, Status indicator lights.

Feature	Description
Universal Dock	For connecting and charging compatible iPod and iPhone models
Auxiliary Input	3.5mm jack for connecting other audio devices (e.g., MP3 players, tablets)
Remote Control	Controls power, volume, playback, and track selection
Power Adapter	Provides power to the system and charges the docked device
Status Indicators	LED lights for power, charge status, and auxiliary input mode
Bose Waveguide	Proprietary speaker technology for rich, full sound from a compact enclosure
Volume Controls	Located on the remote and sometimes on the unit itself
Power Button	Turns the system on and off

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources and moisture.

Connect Power: Plug the power adapter into the AC input on the back of the SoundDock, then plug the adapter into a standard 120V AC wall outlet.
Dock Your Device: Remove any protective case from your iPod or iPhone. Insert the appropriate dock adapter (if needed) and connect your device to the Universal Dock.
Connect Auxiliary Device (Optional): Use a standard 3.5mm audio cable to connect another device to the AUX IN jack.

WARNING! Use only the provided Bose power adapter. Ensure the unit is placed on a stable surface to prevent tipping.

First-Time Setup

Power on the system; observe status indicators.

Power On: Press the POWER button on the remote or the unit. The power indicator should light up.
Dock Mode: When an iPod/iPhone is docked, it should begin charging automatically. The system will switch to play audio from the docked device.
Auxiliary Mode: To use the auxiliary input, press the AUX button on the remote. Connect your audio device and start playback.
Volume Adjustment: Set the initial volume to a low level using the remote or unit controls.

CAUTION! Do not force your device into the dock. Ensure you are using the correct dock adapter for a secure fit.

Specifications

Model: Bose SoundDock Series 111.
Compatibility: iPod models with dock connector; iPhone models (charging support varies).
Audio Inputs: Universal Dock (digital), 3.5mm Auxiliary input (analog).
Audio Output: Integrated stereo speakers with Bose waveguide technology.
Remote Control: Infrared, included.
Power Source: 120V AC, 60Hz via included power adapter.
Dimensions: Compact design, please refer to product packaging for exact measurements.
Operating Temp: Standard room temperature.

Controls and Settings

Primary controls are via the included remote control. Unit may have basic buttons (Power, Aux).

Remote: POWER, VOLUME UP/DOWN, MUTE, PLAY/PAUSE, PREVIOUS TRACK, NEXT TRACK, AUX (input select).

System automatically selects the dock as the active input when a device is connected and recognized. Press AUX to switch to the auxiliary input. There are no user-adjustable audio equalizer settings; sound is optimized by Bose engineering.

Connecting Devices

iPod/iPhone: Use the Universal Dock. Other Audio Devices: Use the 3.5mm AUX IN jack.

Ensure the SoundDock is powered off before connecting or disconnecting devices.
For docking, select the correct insert for your device model to ensure proper alignment and charging.
For auxiliary devices, use a quality shielded audio cable to minimize interference.
Power on the SoundDock, then select the correct input (Dock or AUX) using the remote.

Tip: For best audio quality from auxiliary devices, set the device's volume to about 75% and use the SoundDock remote for final volume adjustment.

Playing Music

Supports playback from docked iPod/iPhone or connected auxiliary device.

Docked Playback: Dock your iPod/iPhone. Use the device itself or the remote to select music, play, pause, skip tracks, and adjust volume.
Auxiliary Playback: Connect your device to the AUX IN jack. Press AUX on the remote. Control playback (play, pause, track selection) directly on the connected device. Use the SoundDock remote for volume control and mute.
Charging: A docked iPod/iPhone will charge whenever the SoundDock is plugged into power, even if the system is turned off.

WARNING! Do not remove the docked device while it is updating or syncing. Eject the device from iTunes on your computer first if connected.

Remote Control

Infrared remote requires line-of-sight to the front of the SoundDock unit.

Replace batteries (typically 2 x AAA) when range decreases or functions become unresponsive.
Point the remote directly at the SoundDock's IR sensor.
Remote functions include: System Power, Volume, Mute, Play/Pause, Track Navigation, and Input Selection (Dock/AUX).

Care & Cleaning

Unplug the power adapter before cleaning. Use a soft, dry cloth to wipe the exterior. For stubborn marks, slightly dampen the cloth with water only.

CAUTION! Do not use abrasive cleaners, solvents, or sprays. Do not allow moisture to enter any openings. Keep the dock connector and auxiliary jack free of dust and debris.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This product complies with relevant safety and EMC standards. Copyright and trademarks are property of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / No lights	Power connection	Ensure power adapter is firmly connected to unit and wall outlet. Try a different outlet.
No sound from docked device	Input selection / Volume	Ensure system is on and input is set to Dock. Check volume level on both device and SoundDock.
Device not charging	Dock connection / Adapter	Re-seat the device in the dock. Ensure correct dock adapter is used. Try a different USB cable & power source to test device charging port.
No sound from auxiliary device	Cable / Input selection	Ensure cable is fully inserted at both ends. Press AUX button on remote to select auxiliary input. Check audio output on the source device.
Remote not working	Batteries / Obstructions	Replace remote batteries. Ensure clear line-of-sight between remote and SoundDock IR sensor.
Distorted sound	Source volume / Connection	If using AUX input, lower the volume on the source device. Check audio cable for damage.

Reset: Unplug the power adapter from the wall for 60 seconds, then reconnect.

Service: For persistent issues, contact Bose Customer Support or visit www.bose.com/support.