Bose SoundDock 10 Bluetooth User Manual

The Bose SoundDock 10 Bluetooth is a premium digital music system designed for iPod/iPhone and Bluetooth-enabled devices. It features Bose waveguide speaker technology for enhanced audio, a dock connector for direct iPod/iPhone playback and charging, Bluetooth connectivity for wireless streaming, auxiliary input for other audio sources, remote control, and a sleek, compact design. Powered by AC adapter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Music 8. Bluetooth Pairing 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker system, Dock connector for iPod/iPhone, Bluetooth antenna, Auxiliary input, Remote Control, AC power input, Status indicators.

Feature	Description
Dock connector	For iPod/iPhone playback and charging
Bluetooth antenna	For wireless audio streaming from compatible devices
Auxiliary input jack	For connecting other audio sources (e.g., MP3 players)
Remote control	For volume, playback, and source selection
AC power input	For power connection
Status LED	Indicates power, Bluetooth pairing, and source mode
POWER	Turns system on/off
SOURCE	Switches between Dock, Bluetooth, and Aux input
VOLUME +/-	Adjusts audio level
PLAY/PAUSE	Controls playback on connected device

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect power: Plug AC adapter into power input and wall outlet.
Place iPod/iPhone: Insert device into dock connector (use adapter if needed).
Connect auxiliary source: Use 3.5mm audio cable to Aux input jack.
Ensure proper ventilation around unit.

WARNING! Do not place near heat sources or in humid environments. Use included power adapter only.

First-Time Setup

Power on system; follow indicator prompts.

Select source: Press SOURCE button to cycle through Dock, Bluetooth, Aux.
Pair Bluetooth: Enter pairing mode (see Bluetooth section).
Adjust volume: Use VOLUME buttons or remote.
For iPod/iPhone: Ensure device is seated properly; it will begin charging automatically.

CAUTION! Handle dock connector with care; do not force device insertion.

Specifications

Speaker System: Bose waveguide technology with dual drivers.
Audio Inputs: Dock connector (iPod/iPhone), Bluetooth, 3.5mm Aux.
Bluetooth: Version 2.1+EDR, A2DP profile support.
Power: AC adapter (input: 100-240V, 50/60Hz).
Remote Control: Infrared, requires CR2032 battery (included).
Supported Devices: iPod (with dock connector), iPhone, Bluetooth audio devices.
Dimensions: Compact design for tabletop use.
Operating Temp: 0°C to 35°C (32°F to 95°F).

Controls and Settings

Front Panel: POWER, SOURCE, VOLUME +/-. Remote: POWER, SOURCE, VOLUME, PLAY/PAUSE, PREV/NEXT, MUTE.

Indicator Lights: Solid white = Power on; Blinking blue = Bluetooth pairing; Solid blue = Bluetooth connected; Amber = Aux mode.

No user-adjustable audio settings (Bose-tuned performance). Remote requires line-of-sight to front IR sensor.

Connecting Devices

Dock: Insert iPod/iPhone directly. Bluetooth: Pair via device settings. Aux: Use 3.5mm cable.

Turn on SoundDock and select desired source.
For dock: Ensure device is compatible and fully seated.
For Bluetooth: Enable pairing on SoundDock, then select "Bose SoundDock 10" on your device.
For Aux: Connect cable from device's headphone jack to Aux input.

Tip: For best Bluetooth range, keep device within 10 meters (33 feet) without obstructions.

Playing Music

Supports audio playback from docked iPod/iPhone, Bluetooth devices, and Aux input.

Select source: Use SOURCE button to choose Dock, Bluetooth, or Aux.
Control playback: Use remote or device controls (for Bluetooth/Aux).
Adjust volume: Use VOLUME buttons on unit or remote.
Pause: Press PLAY/PAUSE on remote.
Skip tracks: Use PREV/NEXT buttons on remote (works with docked iPod/iPhone).
Mute: Press MUTE on remote; press again to restore volume.

WARNING! Do not expose to liquids; keep small objects away from speaker ports.

Bluetooth Pairing

To pair a Bluetooth device:

Press and hold SOURCE button on SoundDock until LED blinks blue.
On your device, enable Bluetooth and select "Bose SoundDock 10" from list.
If prompted, enter PIN "0000".
LED turns solid blue when connected.

To disconnect, turn off Bluetooth on device or select another source on SoundDock. SoundDock remembers last paired device.

Care & Cleaning

Unplug before cleaning. Wipe exterior with soft, dry cloth. For stubborn marks, lightly dampen cloth with water.

CAUTION! Do not use solvents, abrasives, or sprays. Do not allow moisture into openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Copyright © Bose Corporation. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection	Ensure AC adapter is plugged in securely; try different outlet.
No sound	Volume/source	Check volume level; ensure correct source is selected; check mute.
Bluetooth not pairing	Distance/interference	Move device closer; ensure SoundDock is in pairing mode; restart both devices.
iPod/iPhone not playing	Connection/charge	Re-seat device; ensure it is powered on; check for compatibility.
Remote not working	Battery/obstruction	Replace CR2032 battery; ensure line-of-sight to front panel.

Reset: Unplug power for 60 seconds, then reconnect.

Service: 1-800-999-2673; www.bose.com/support