Bose Solo Remote Control Manual

The Bose Solo Remote Control is designed for use with Bose Solo soundbars and related audio systems. It provides intuitive control over power, volume, input selection, sound modes, and other essential functions. This manual covers setup, button functions, programming, battery replacement, troubleshooting, and maintenance to ensure optimal performance.

1. Features at a Glance 2. Setup and Pairing 3. Button Functions 4. Specifications 5. Programming the Remote 6. Controlling Connected Devices 7. Battery Replacement 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Ergonomic design, backlit buttons (on select models), infrared (IR) transmitter, battery compartment, and dedicated control keys for Bose audio systems.

Feature	Description
Power Button	Turns the Bose Solo system on/off
Volume Controls	Adjusts master volume up/down
Mute Button	Instantly mutes/unmutes audio
Input Select	Cycles through connected audio sources (TV, AUX, Bluetooth)
Sound Mode Button	Toggles between preset sound profiles (Dialogue, Movie, Music)
Bass Control	Adjusts low-frequency output levels
Setup/Options Button	Accesses system settings and remote programming menu
Number Buttons (0-9)	For direct input selection or code entry during programming
Backlit Buttons	Illuminates keys in low-light conditions (on supported models)
Battery Indicator	LED flashes when batteries are low

Setup and Pairing

Unpack the remote and ensure it is compatible with your Bose Solo system.

Insert batteries: Open battery compartment, install two AAA batteries as indicated.
Pair with system: Point remote at Bose Solo soundbar, press and hold SETUP and INPUT simultaneously for 3 seconds until LED flashes.
Test connectivity: Press POWER to turn system on; adjust volume to confirm operation.
Program additional devices: Follow programming section to control TV or other components.

WARNING! Use only recommended battery types. Incorrect installation may damage the remote.

Button Functions

All buttons are clearly labeled for intuitive operation.

Primary Controls: POWER, VOLUME +/- , MUTE, INPUT, SOUND MODE, BASS +/-.

Secondary Controls: SETUP (enters programming mode), NUMBER PAD (0-9), BACKLIGHT (if available).

Special Functions: Press and hold INPUT for 5 seconds to reset remote to factory defaults. Press and hold SOUND MODE to customize equalizer settings via on-screen menu (if supported by system).

Specifications

Compatibility: Bose Solo Series soundbars and compatible Bose audio systems.
Control Method: Infrared (IR) with select models supporting RF for extended range.
Power Source: 2 x AAA batteries (alkaline recommended).
Battery Life: Approximately 12 months with typical use.
Operating Range: Up to 30 feet (9 meters) line-of-sight.
Dimensions: Approx. 6.5 x 2.0 x 0.5 inches (165 x 51 x 13 mm).
Weight: Approx. 3.5 oz (100 g) with batteries.
Operating Temperature: 32°F to 104°F (0°C to 40°C).
Warranty: 1-year limited warranty from date of purchase.

Programming the Remote

The remote can be programmed to control your TV, cable box, or other devices.

Turn on the device you wish to control (e.g., TV).
Press and hold SETUP on remote until LED lights up.
Enter the 4-digit code for your device brand (see code list in manual appendix).
LED flashes twice to confirm successful programming.
Test by pressing POWER; device should turn on/off.
If unsuccessful, repeat steps with alternate code for your brand.

Tip: Keep the remote pointed at the device during programming.

Controlling Connected Devices

Once programmed, use the remote to operate multiple devices.

Select device mode: Press and hold SETUP, then press corresponding device button (TV, CABLE, AUX).
Control functions: Use volume, power, and input buttons for selected device.
Switch back to Bose control: Press the BOSE or SOUNDBAR button.

Note: Some advanced functions may require original device remote.

Battery Replacement

Replace batteries when remote becomes unresponsive or LED flashes red.

Slide open battery cover on rear of remote.
Remove old batteries and dispose of properly.
Insert two new AAA batteries, observing correct polarity (+/-).
Close cover securely.
Test remote by pressing any button.

CAUTION! Do not mix old and new batteries or different battery types.

Care & Maintenance

Unload batteries before extended storage. Clean with dry, soft cloth; avoid liquids.

CAUTION! Do not expose to extreme heat, moisture, or direct sunlight. Keep away from children and pets.

Regulatory Information

FCC Part 15: This device complies with Class B digital device limits for residential use. Copyright © 2025 Bose Corporation. All trademarks are property of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstacles, out of range	Replace batteries; ensure clear line-of-sight; move within 30 feet.
Buttons unresponsive	Battery corrosion, internal damage	Clean battery contacts with dry cloth; contact Bose support if persistent.
Cannot program device	Incorrect code, device not compatible	Use correct 4-digit code from manual; verify device is IR-controlled.
Short battery life	Old batteries, excessive use	Use fresh alkaline batteries; reduce backlight usage if applicable.
Intermittent operation	Weak batteries, interference	Replace batteries; avoid fluorescent lights or other IR sources.

Reset: Remove batteries, press all buttons for 10 seconds, reinstall batteries.

Service: 1-800-999-2673; www.bose.com/support