bose solo 5 manual codes

The Bose Solo 5 is a compact soundbar designed to enhance TV audio, featuring dialogue mode for clearer speech, Bluetooth connectivity for wireless streaming, a universal remote control, multiple audio inputs, and a simple setup process. Below are key sections for features, installation, setup, operation, remote codes, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Remote Control Codes 8. Bluetooth Pairing 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Soundbar unit, Universal Remote Control, Optical audio cable, Power adapter, Wall-mounting template.

Feature	Description
Dialogue Mode	Enhances speech clarity for TV shows and movies
Bluetooth Connectivity	For wireless streaming from smartphones, tablets, or computers
Universal Remote	Controls soundbar, TV, and other devices
Audio Inputs	Optical audio input, coaxial audio input, 3.5mm AUX input
Bass Port	Enhances low-frequency performance
LED Indicators	Show power status, input source, and Bluetooth connection
Power Button	Turns soundbar on/off
Input Button	Cycles through audio input sources
Bluetooth Button	Activates pairing mode
Remote Sensor	Receives signals from the remote control

Installation

Unpack and inspect contents. Place soundbar below TV or mount on wall.

Position soundbar: Place centered below TV on a stable surface or use included template for wall mounting.
Connect to TV: Use optical cable (recommended) or coaxial cable from TV's audio output to soundbar input.
Connect power: Plug power adapter into soundbar and wall outlet.
Connect other devices: Use AUX input for additional audio sources.

WARNING! Ensure soundbar is placed on a stable surface to prevent falling. Follow wall-mounting instructions carefully.

First-Time Setup

Power on soundbar; follow on-screen prompts if available.

Connect to TV: Use optical cable for best audio quality.
Set TV audio output: Configure TV settings to output audio via optical or coaxial.
Program remote: Follow code entry process to control TV and other devices.
Test audio: Play TV content to ensure sound is routed through soundbar.

CAUTION! Do not block ventilation openings on soundbar. Keep away from heat sources.

Specifications

Dimensions: Approximately 21.5" wide x 2.25" high x 3.5" deep.
Audio Output: Integrated speakers with enhanced dialogue clarity.
Connectivity: Bluetooth, Optical input, Coaxial input, 3.5mm AUX input.
Power Source: AC power adapter (included).
Remote Control: Universal remote with learning capability.
Wall Mounting: Compatible with included template and hardware.
Operating Temp: 32°F to 95°F (0°C to 35°C).
Warranty: Limited 1-year warranty.

Controls and Settings

Access settings via remote control or front panel buttons.

Front Panel: Power, Input, Bluetooth, LED indicators.

Remote: Power, Volume Up/Down, Mute, Input, Dialogue Mode, Bluetooth, Number pads for code entry.

Settings: Input selection (Opt, Coax, AUX, BT), Dialogue Mode On/Off, Remote programming, Factory reset.

Connecting Devices

TV: Optical or coaxial cable. Other devices: AUX input or Bluetooth.

Turn off soundbar and devices before connecting.
Match cables to correct ports (e.g., optical cable to optical port).
Select input via remote or front panel button (Opt, Coax, AUX, BT).

Tip: Use optical connection for best audio quality from TV.

Remote Control Codes

Universal remote codes for common TV brands. To program:

Turn on TV manually.
Press and hold TV button on remote until LED blinks twice.
Enter 4-digit code for your TV brand (see list below).
Press Power button to test. If TV turns off, programming is successful.

Brand	Code 1	Code 2	Code 3
Samsung	0101	0178	0191
LG	0020	0413	0001
Sony	0000	0001	0065
Vizio	0010	0020	0030
Toshiba	0040	0080	0120
Panasonic	0050	0090	0130
Sharp	0060	0100	0140

Note: If code doesn't work, try next code for your brand or use auto-search method described in manual.

Bluetooth Pairing

Pair with Bluetooth devices for wireless audio streaming.

Press Bluetooth button on remote or soundbar to enter pairing mode (LED blinks blue).
On your device, enable Bluetooth and select "Bose Solo 5" from available devices.
Once connected, LED will turn solid blue.
To disconnect, press Bluetooth button again or turn off Bluetooth on your device.

WARNING! Keep Bluetooth devices within 30 feet for optimal connection.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth only; do not use liquids or abrasive cleaners.

CAUTION! Do not spray liquids directly on soundbar. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from soundbar	Input selection/connections	Ensure correct input selected; check cable connections; increase volume.
Remote not working	Batteries/obstructions	Replace batteries; point remote at soundbar sensor; remove obstacles.
Bluetooth not connecting	Pairing mode/distance	Enter pairing mode; ensure device is within range; restart both devices.
Dialogue mode not effective	Content/settings	Ensure Dialogue Mode is enabled; adjust TV audio output settings.
Soundbar turns off unexpectedly	Auto-standby/power	Disable auto-standby in settings; check power connection.

Reset: Press and hold Bluetooth and Mute buttons for 10 seconds to factory reset.

Service: 1-800-999-2673; www.bose.com/support