bose solo 15 series ii manual with codes

The Bose Solo 15 Series II is a premium soundbar designed to enhance TV audio, featuring dialogue enhancement, Bluetooth connectivity, universal remote control with codes for major TV brands, HDMI ARC, optical digital audio input, and simple setup. It delivers clear, balanced sound from a single, low-profile unit. Below are key sections for setup, features, remote programming, operation, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Remote Control & Codes 4. Specifications 5. Controls and Connections 6. Connecting to TV & Sources 7. Bluetooth Pairing 8. Sound Modes & Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Soundbar, Universal Remote Control, Power Cord, Optical Cable, HDMI Cable, Wall Mount Template.

Feature	Description
Dialogue Mode	Enhances speech clarity for TV shows and movies
Bluetooth Connectivity	For wireless streaming from smartphones and tablets
Universal Remote	Controls soundbar, TV, and other devices (pre-programmed codes included)
HDMI ARC (Audio Return Channel)	Simplifies connection and control with compatible TVs
Optical Digital Input	For high-quality audio connection from TV or source
IR (Infrared) Input	For external IR receiver connection if needed
POWER	Turns soundbar on/off
INPUT	Cycles through audio sources (TV, Bluetooth, Optical)
BLUETOOTH	Initiates pairing mode
DIALOGUE	Toggles dialogue enhancement on/off

Installation & Setup

Unpack and inspect contents. Place soundbar below TV on stand or mount on wall.

Connect to TV: Use included HDMI cable to HDMI ARC port on TV, or use optical cable to TV's optical output.
Connect Power: Plug power cord into soundbar and wall outlet.
Power On: Press POWER on soundbar or remote. Indicator light will illuminate.
Select Input: Press INPUT button to match your connection (TV for HDMI ARC/Optical).

WARNING! Ensure soundbar is placed on a stable surface. Keep vents clear for proper ventilation.

Remote Control & Codes

Program the universal remote to control your TV's power and volume.

Turn on your TV manually.
Press and hold the TV button on the Bose remote until the light bar flashes twice.
Enter the 4-digit code for your TV brand from the list below.
The light bar will flash twice if the code is accepted. Test power and volume control.

Common TV Codes:

Samsung: 0005, 0105, 0175
LG: 0006, 0026, 0206
Sony: 0001, 0061, 0121
Vizio: 0012, 0052, 0112
TCL: 0023, 0083, 0143
Insignia: 0017, 0077

NOTE: If code fails, repeat auto-search process: Hold TV button until light flashes, then repeatedly press POWER until TV turns off, then press ENTER to save.

Specifications

Dimensions: Approx. 35.5" W x 2.25" H x 4.25" D.
Audio Output: Integrated amplifiers and proprietary speakers.
Connectivity: HDMI ARC, Optical Input, Bluetooth 4.2, IR Input.
Power Source: 120V AC, 60Hz.
Remote Control: Universal IR remote (batteries included).
Supported Bluetooth Profiles: A2DP, AVRCP.
Wall Mountable: Yes (template included).
Operating Temp: 32°F to 95°F (0°C to 35°C).

Controls and Connections

Access controls via top panel buttons or remote. Top Panel: POWER, INPUT, BLUETOOTH, DIALOGUE.

Remote: POWER, TV/SOURCE SELECT, VOLUME UP/DOWN, MUTE, INPUT, BLUETOOTH, DIALOGUE, NUMBER PAD (for codes).

Rear Connections: HDMI OUT (ARC), OPTICAL IN, IR IN, POWER INPUT.

Settings: Input selection, Dialogue mode on/off, Bluetooth pairing, remote code programming.

Connecting to TV & Sources

HDMI ARC (Recommended): Connect HDMI cable from soundbar's HDMI OUT to TV's HDMI ARC port. Enables single remote control.

Optical Digital: Connect optical cable from soundbar's OPTICAL IN to TV's optical output. Set TV audio output to PCM or Bitstream.

IR Control: If TV is in a cabinet, connect optional IR blaster to IR IN port.

Turn off all devices before connecting cables.
Select correct input on soundbar (TV for HDMI/Optical).
Set TV's audio output to external speakers/audio system.

Bluetooth Pairing

Pair to stream music from Bluetooth-enabled devices.

Press BLUETOOTH button on soundbar or remote. Indicator will flash blue.
On your mobile device, enable Bluetooth and select "Bose Solo 15 Series II" from the list.
Once connected, the indicator will turn solid blue. Play audio from your device.
To disconnect, press BLUETOOTH again or disable Bluetooth on your device.

Note: The soundbar can remember multiple devices. To pair a new device, ensure it is in pairing mode while the soundbar's Bluetooth indicator is flashing.

Sound Modes & Settings

Dialogue Mode: Press DIALOGUE button to enhance vocal frequencies. Ideal for news, talk shows, and movies with heavy dialogue.

Default Sound Profile: Optimized for TV and movie content with balanced bass and treble.

Volume Leveling: Automatically reduces loud commercials and sudden volume spikes (always active).

Input Priority: When both HDMI and Optical are connected, HDMI ARC takes priority.

Care & Maintenance

Unplug from power before cleaning. Use a soft, dry cloth to wipe exterior. Do not use liquids, sprays, or abrasive cleaners.

CAUTION! Do not block ventilation openings. Keep away from direct heat sources and moisture.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. ICES-003 Compliance: Class B digital apparatus. Copyright © Bose Corporation. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from soundbar	Incorrect input/connection	Ensure correct input is selected; check cable connections; increase volume on soundbar and TV.
Remote not controlling TV	Incorrect code/obstructions	Reprogram remote with correct TV code; ensure clear path to TV IR sensor; replace remote batteries.
Bluetooth not connecting	Pairing mode/range	Ensure soundbar is in pairing mode (flashing blue); move device closer; remove obstacles.
Audio out of sync (lip sync)	TV processing delay	Enable lip sync or audio delay adjustment on TV settings if available.
HDMI ARC not working	TV settings/cable	Enable HDMI CEC/ARC on TV; try a different HDMI cable; connect to correct ARC port on TV.

Reset: Unplug power for 60 seconds, then reconnect to reset soundbar.

Service: 1-800-999-2673; www.bose.com/support