Bose Remote Control RC25 Manual

The Bose RC25 is a universal remote control designed to operate Bose lifestyle systems and other home entertainment components. It features backlit buttons, learning capabilities, macro programming, and compatibility with multiple device types including TVs, DVD/Blu-ray players, cable/satellite boxes, and audio systems. Below are key sections for overview, setup, programming, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Initial Setup 4. Specifications 5. Controls and Layout 6. Programming the Remote 7. Advanced Functions 8. Battery Information 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Backlit buttons, LCD display, IR transmitter, learning sensor, macro buttons, device selection keys.

Feature	Description
Backlit buttons	Illuminated for use in low-light conditions
LCD display	Shows device mode and status information
IR transmitter	Sends infrared signals to controlled devices
Learning sensor	Receives IR codes from other remotes for programming
Macro buttons	Programmable for multi-step operations
Device selection keys	TV, DVD, CBL/SAT, AUX, CD, TAPE
Volume control	Master volume control for Bose systems
Transport controls	Play, pause, stop, forward, reverse
Navigation pad	Directional arrows and select button
Power button	Turns devices on/off

Package Contents

Unpack and verify all components are present.

Bose RC25 Remote Control (1)
AAA batteries (2)
Quick Start Guide
Registration card
Safety and warranty information

NOTE: If any item is missing or damaged, contact Bose customer service immediately.

Initial Setup

Prepare remote for first use.

Install batteries: Open battery compartment, insert two AAA batteries observing polarity.
Power on: Press any button to activate remote; backlight should illuminate briefly.
Select device: Press TV, DVD, CBL/SAT, or other device button to choose component.
Test operation: Point remote at device and press POWER to verify control.

CAUTION! Use only recommended battery type; do not mix old and new batteries.

Specifications

Power Source: 2 x AAA batteries (included).
Battery Life: Approximately 6 months with typical use.
IR Frequency: Standard infrared (IR) 38kHz.
Operating Range: Up to 30 feet (9 meters).
Compatibility: Controls up to 8 devices including Bose systems.
Learning Capability: Can learn IR codes from other remotes.
Macro Programming: Stores up to 4 macros with 10 steps each.
Dimensions: 8.5 x 2.2 x 0.8 inches (216 x 56 x 20 mm).
Weight: 4.2 oz (120 g) with batteries.

Controls and Layout

Top section: LCD display showing active device. Middle: Device selection buttons (TV, DVD, CBL/SAT, AUX, CD, TAPE). Lower section: Navigation pad, transport controls, numeric keypad, volume/channel controls.

Special buttons: LEARN (for programming), MACRO (records sequences), BACKLIGHT (illuminates buttons), SETUP (accesses programming menu).

LCD indicators: Shows device mode (TV, DVD, etc.), battery status, learning mode, macro status.

Programming the Remote

Three programming methods: Direct code entry, auto-search, learning from existing remote.

Direct code entry: Press and hold device button until LCD flashes, enter 4-digit code.
Auto-search: Press and hold device button, press POWER repeatedly until device turns off.
Learning mode: Press LEARN, point original remote at RC25 sensor, press button to teach.

Tip: Have device manufacturer codes ready; test each programmed function.

Advanced Functions

Macro programming: Record sequences of commands for one-button operation.

Press and hold MACRO button until LCD flashes.
Press device buttons in sequence (e.g., TV POWER, CBL/SAT POWER, DVD POWER).
Press MACRO again to save; assign to MACRO 1-4 button.
Execute macro by pressing assigned MACRO button.

Volume lock: Locks volume control to specific device. Press and hold VOLUME + TV for 3 seconds.

Backlight adjustment: Press and hold BACKLIGHT to adjust illumination duration.

Battery Information

Battery replacement: Replace when backlight dims or remote becomes unresponsive.

Open battery compartment on rear.
Remove old batteries observing polarity.
Insert new AAA batteries (+/- correctly aligned).
Close compartment; remote resets but retains programming.

WARNING! Do not dispose of batteries in fire; recycle properly.

Care & Maintenance

Clean with dry, soft cloth. Avoid liquids and abrasive cleaners.

CAUTION! Do not expose to extreme temperatures or humidity. Store in cool, dry place.

Regulatory Information

FCC Part 15: This device complies with part 15 of FCC rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Copyright © Bose Corporation. All rights reserved. Bose and RC25 are trademarks of Bose Corporation. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction	Replace batteries; ensure clear line of sight to device.
Cannot program device	Incorrect code, distance	Verify manufacturer code; program within 2 inches during learning.
Macro not executing	Sequence too long, delay	Reduce steps to 10 or less; adjust timing in setup menu.
Backlight not working	Battery low, setting	Replace batteries; check backlight duration setting.
Buttons unresponsive	Reset needed	Remove batteries for 60 seconds, reinsert to reset.

Reset to factory defaults: Remove batteries, press and hold POWER for 10 seconds, reinstall batteries.

Service: 1-800-999-2673; www.bose.com/support