Bose RCX35L Manual

The Bose RCX35L is a premium in-wall or in-ceiling loudspeaker designed for high-fidelity audio reproduction in residential or commercial installations. It features a 5.25-inch woofer and a 1-inch tweeter, delivering wide, even sound coverage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 5.25-inch woofer, 1-inch tweeter, paintable grille, integrated mounting system, and speaker terminals.

Feature	Description
Woofer	5.25-inch for mid-range and bass frequencies
Tweeter	1-inch for clear high-frequency reproduction
Paintable Grille	Blends seamlessly with wall or ceiling decor
Mounting System	Integrated bracket for secure and easy installation
Speaker Terminals	Spring-loaded connectors for secure wire connection
Frequency Response	Wide range for accurate sound reproduction
Power Handling	Handles typical amplifier outputs for home audio
Impedance	Compatible with standard audio receivers
Sound Coverage	Wide, even dispersion for consistent listening
Build Quality	Durable materials for long-term performance

Installation

Unpack and inspect contents. Ensure proper tools and safe working conditions.

1. Choose location: Select wall or ceiling location free of obstructions (wiring, pipes).
2. Cut opening: Use provided template to mark and cut drywall opening.
3. Run speaker wire: Route wire from amplifier to speaker location.
4. Mount speaker: Secure mounting bracket, connect wires to terminals, snap speaker into place.
5. Attach grille: Place grille over speaker; paint if desired to match surroundings.

WARNING! Turn off amplifier before connecting wires. Ensure secure mounting to prevent falls.

First-Time Setup

After installation, configure with your audio system.

1. Connect to amplifier: Use speaker wire to connect terminals to amplifier's speaker outputs.
2. Set amplifier settings: Configure channel levels, crossover if using with subwoofer.
3. Test sound: Play audio to ensure proper operation and phasing.
4. Adjust grille: Ensure grille is securely attached and painted if needed.

CAUTION! Do not over-tighten terminals. Match positive/negative connections.

Specifications

• Driver Size: 5.25-inch woofer, 1-inch tweeter.
• Frequency Response: Optimized for wide-range audio.
• Power Handling: Compatible with typical home audio amplifiers.
• Impedance: Standard ohms for easy integration.
• Mounting Depth: Designed for standard wall/ceiling cavities.
• Grille: Paintable white, removable for access.
• Terminals: Spring-loaded for secure wire connection.
• Recommended Use: In-wall or in-ceiling for home theater or multi-room audio.
• Warranty: Refer to Bose warranty terms.

Controls and Settings

Speaker itself has no controls; all adjustments made via connected amplifier/receiver.

Amplifier/Receiver Controls: Volume, Balance, Tone (Bass/Treble), Crossover settings if used with subwoofer.

For multi-channel setups: Use receiver's setup menu to assign speaker, set distance, level calibration.

No onboard EQ or switches; designed for flat response with amplifier adjustment.

Connecting Devices

Connect only to audio amplifier/receiver speaker outputs.

1. Turn off amplifier and unplug from power.
2. Strip speaker wire ends (about 1/2 inch).
3. Press terminal tabs on speaker, insert bare wire into correct hole (+/-).
4. Release tabs to secure wire; ensure no stray strands.
5. Connect other end to amplifier's speaker outputs, matching polarity.

Tip: Use quality speaker wire of appropriate gauge for run length.

Operation

Operates passively via connected amplifier.

1. Power on amplifier and select audio source.
2. Adjust volume and settings on amplifier as desired.
3. Speaker reproduces audio based on amplifier output.
4. For multi-room: Use amplifier's zone controls if available.

WARNING! Do not exceed amplifier's recommended power output to avoid damage.

Accessibility Features

No specific accessibility features on speaker; rely on amplifier/receiver features (e.g., volume limit, remote control).

Care & Cleaning

Turn off system before cleaning. Use soft, dry cloth for grille; avoid liquids.

CAUTION! Do not remove grille forcefully; avoid pressing on driver cones.

Regulatory Information

Complies with applicable safety and EMC regulations. Copyright and trademarks owned by Bose Corporation. For support, visit www.bose.com or contact Bose customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Amplifier off/wire issue	Check amplifier power and source; verify wire connections at both ends.
Distorted sound	Overdriven amplifier	Reduce amplifier volume; check for clipping.
Intermittent sound	Loose wire connection	Secure wire in terminals; check for breaks in wire.
One speaker quiet	Balance setting/wire polarity	Check amplifier balance; ensure correct +/- connections.
Buzzing/hum	Ground loop/interference	Ensure proper grounding of amplifier; route wires away from power cables.

Reset: Not applicable; check amplifier settings.

Service: Contact Bose customer support or authorized service center.