bose rc18t1 27 manual

The Bose RC18T1 27 is a premium home theater remote control designed for seamless integration with Bose Lifestyle and home entertainment systems. It features backlit buttons, macro programming capabilities, device control for up to 4 components (TV, DVD, Cable/Satellite, AUX), learning function for non-Bose devices, LCD display, and ergonomic design. Below are key sections for overview, setup, programming, operation, maintenance, and support.

Features at a Glance

Key components: Backlit LCD display, Device selection buttons (TV, DVD, CBL/SAT, AUX), Navigation pad, Volume/Channel controls, Number pad, Macro buttons (M1, M2, M3), SETUP button, Learning sensor.

Feature	Description
Backlit buttons & display	Illuminated for low-light use
Device control	Controls up to 4 audio/video components
Macro programming	Stores sequences of commands on M1-M3 buttons
Learning function	Learns commands from other remotes
LCD display	Shows active device and mode
Ergonomic design	Fits comfortably in hand
POWER	Turns selected device on/off
INPUT	Cycles through input sources on TV
MENU/GUIDE	Accesses device menu or program guide
EXIT	Exits menus or on-screen displays

Unpacking and Contents

Unpack and verify all items are present.

1. Bose RC18T1 27 Remote Control
2. Two (2) AA alkaline batteries
3. Quick Start Guide
4. Registration card

WARNING! Remove plastic battery insulator before first use. Keep packaging for future reference or transport.

Initial Setup

Prepare remote for first use with your Bose system.

1. Insert batteries: Open battery compartment, insert two AA batteries observing polarity.
2. Pair with system: Point remote at Bose system, press and hold TV and DVD buttons simultaneously for 3 seconds until LCD flashes.
3. Test basic functions: Press POWER to turn system on; use VOLUME to adjust sound.
4. Program devices: Use auto-search or manual code entry for non-Bose components.

CAUTION! Use only recommended battery type. Do not mix old and new batteries.

Specifications

• Model: RC18T1 27
• Battery: 2 x AA alkaline (included)
• Range: Up to 30 feet (9 meters)
• Transmission: Infrared (IR)
• Display: Backlit LCD with 2-line text
• Programming: Auto-code search, manual code entry, learning
• Macro Memory: 3 programmable sequences (M1-M3)
• Compatibility: Bose Lifestyle systems, most major AV brands
• Operating Temp: 32°F to 104°F (0°C to 40°C)

Button Layout and Functions

Top section: LCD display. Device buttons: TV, DVD, CBL/SAT, AUX. Navigation: Arrow pad, OK/SELECT. Media controls: PLAY, PAUSE, STOP, FF, REW. Special: SETUP, LEARN, BACKLIGHT.

Key Functions: Press device button first to control that component. BACKLIGHT illuminates buttons for 10 seconds. SETUP enters programming mode. LEARN activates learning function for capturing commands from other remotes.

Programming the Remote

To control non-Bose devices (TV, cable box, etc.).

1. Auto-search: Press and hold device button (e.g., TV) until LCD flashes. Point at device, press POWER repeatedly until device turns off. Press SETUP to save.
2. Manual code entry: Find code in code list. Press and hold device button until LCD flashes. Enter 4-digit code using number pad. Press SETUP to save.
3. Test: Press POWER to verify device responds.

Tip: Have device turned on and in line of sight during programming.

Using Macros

Macros automate multiple commands with one button press.

1. Record macro: Press and hold desired M button (M1, M2, or M3) until LCD shows "REC." Press sequence of commands (e.g., TV POWER, CBL/SAT POWER, INPUT). Press M button again to stop recording.
2. Execute macro: Press the programmed M button to run the sequence.
3. Clear macro: Press and hold M button and SETUP simultaneously for 5 seconds.

WARNING! Macros have 2-second delay between commands by default. Do not interrupt during recording.

Learning Function

Learn commands from other remotes not in code library.

1. Enter learn mode: Press LEARN, then press device button (e.g., AUX). LCD shows "READY."
2. Teach command: Point original remote at learning sensor (front of remote), press desired button. LCD flashes when learned.
3. Assign learned command: Press button on Bose remote where you want learned command stored.
4. Exit: Press SETUP to save and exit.

Note: Some proprietary or RF commands cannot be learned. Keep remotes 1-3 inches apart during learning.

Care & Battery Replacement

Replace batteries when LCD dims or buttons become unresponsive.

1. Open battery compartment on back.
2. Remove old batteries, dispose properly.
3. Insert new AA batteries, observing polarity.
4. Close compartment.

CAUTION! Do not expose to extreme heat or moisture. Clean with dry cloth only.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction	Replace batteries; ensure clear line of sight to device.
Cannot program device	Wrong code, distance	Try auto-search again; move closer to device during programming.
Macro doesn't run fully	Delay too short, battery low	Re-record macro with longer pauses; replace batteries.
Learning fails	Remote too far, incompatible signal	Keep remotes 1-3 inches apart; ensure original remote is IR (not RF).
Buttons unresponsive	Reset needed	Remove batteries for 2 minutes, reinsert. Re-pair with system.

Reset: Remove batteries, press and hold POWER for 30 seconds, reinsert batteries.

Service: 1-800-999-2673; www.bose.com/support