Bose Radio Manual 2005

The Bose Radio 2005 is a premium audio system featuring AM/FM radio reception, CD player, auxiliary input, preset stations, clock/alarm functions, Bose waveguide speaker technology, and remote control. Designed for high-fidelity sound in a compact unit. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with integrated CD player and AM/FM tuner, Remote Control, Auxiliary input jack, AC power cord, Antenna terminals.

Feature	Description
AM/FM Tuner	For radio reception with preset memory
CD Player	Plays audio CDs and CD-R/RW discs
Auxiliary Input	For connecting external audio sources (e.g., MP3 player)
Bose Waveguide Speaker	Proprietary technology for rich, room-filling sound
Clock & Alarm	Digital clock with dual alarm functions (radio or buzzer)
Remote Control	Full-function remote for all operations
Preset Stations	Memory for storing favorite AM/FM stations
Headphone Jack	For private listening (3.5mm)
AC Power Input	For main power connection
Sleep Timer	Automatically turns off system after set time

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect power: Plug AC cord into wall outlet (120V, 60Hz).
2. Connect antennas: Attach AM loop antenna and FM wire antenna to rear terminals.
3. Position antennas: Extend FM antenna fully; place AM loop for best reception.
4. Connect auxiliary device: Use 3.5mm audio cable to AUX IN jack if desired.

WARNING! Do not place near heat sources or in humid environments. Ensure ventilation around unit.

First-Time Setup

Plug in power; system will enter standby mode (clock display).

1. Set clock: Press and hold CLOCK button, use HOUR/MINUTE buttons to set time.
2. Tune radio: Press AM/FM button, use TUNING buttons to find station.
3. Save presets: Tune to desired station, press and hold a PRESET button (1-6) for 2 seconds.
4. Set alarms: Press ALARM button, select ALARM 1 or 2, set time and source (radio/buzzer).
5. Adjust sound: Use BASS and TREBLE controls on remote or unit.

CAUTION! Use correct voltage. Avoid blocking vents on rear panel.

Specifications

• Audio System: Bose waveguide speaker technology.
• Tuner: AM/FM with 6 preset stations per band.
• CD Player: Supports CD, CD-R, CD-RW (audio).
• Inputs: Auxiliary input (3.5mm), AM/FM antenna terminals.
• Outputs: Headphone jack (3.5mm).
• Power Source: 120V AC, 60Hz.
• Dimensions: Compact design (approx. 14" W x 6" H x 8" D).
• Remote Control: Infrared, requires 2 AAA batteries (included).
• Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, AM/FM, TUNING, PRESET, CLOCK, ALARM, VOLUME, BASS, TREBLE.

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, SKIP), PRESET, AM/FM, VOLUME, MUTE, CLOCK, ALARM, SLEEP, BASS/TREBLE.

Radio: AM/FM selection, manual tuning, preset recall. CD: Play, pause, stop, skip, repeat, random play. Clock: Time set, 12/24 hour format. Alarm: Dual alarms, radio or buzzer, adjustable volume. Sound: Bass and treble adjustment (±10 levels). Sleep Timer: 15 to 90 minutes in 15-min increments.

Connecting Devices

Auxiliary Input: For MP3 players, computers, or other audio sources.

1. Turn off system before connecting.
2. Connect 3.5mm audio cable from device's headphone/line-out to AUX IN on rear.
3. Select AUX mode by pressing FUNCTION button until "AUX" appears.
4. Adjust volume on both device and radio for optimal level.

Tip: For best sound quality, use high-quality audio cables and ensure connections are secure.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW (audio format).

1. Insert disc: Press CD OPEN/CLOSE, place disc label-up in tray, close.
2. Play: Press PLAY; system reads TOC then begins playback.
3. Skip tracks: Press NEXT or PREVIOUS to skip forward/back.
4. Pause: Press PAUSE; press again to resume.
5. Stop: Press STOP; press PLAY to resume from stop point.
6. Repeat/Random: Press REPEAT or RANDOM during playback for respective modes.
7. Eject: Press CD OPEN/CLOSE during stop mode.

WARNING! Do not use damaged or irregular-shaped discs. Keep CD lens clean.

Radio Operation

AM/FM reception with preset memory.

1. Select band: Press AM/FM button to toggle between AM and FM.
2. Tune manually: Use TUNING UP/DOWN buttons to find station.
3. Auto-scan: Press and hold TUNING button for 2 seconds to scan for next strong station.
4. Save preset: Tune to station, press and hold desired PRESET button (1-6) until beep.
5. Recall preset: Press PRESET button briefly to select saved station.
6. FM stereo: FM stations in stereo will display "ST" icon; mono for weak signals.

Note: For best AM reception, rotate loop antenna. Extend FM wire antenna fully.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth slightly with water only.

CAUTION! Never use solvents, abrasives, or spray cleaners. Do not allow moisture into vents or controls.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2005 Bose Corporation. All rights reserved. Bose and the Bose waveguide speaker are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Ensure cord plugged in securely; try different outlet; check fuse.
Remote not working	Batteries/obstruction	Replace batteries; point remote at sensor; remove obstacles.
Poor radio reception	Antenna/placement	Extend FM antenna fully; reposition AM loop; move unit location.
CD won't play	Disc/dirty lens	Ensure disc is clean, not scratched; try different CD; use lens cleaner.
No sound from AUX	Connection/volume	Check cable connections; ensure AUX mode selected; adjust volume on source.
Clock resets	Power interruption	Unit has no backup battery; reset clock after power outage.
Distorted sound	Source/volume	Reduce volume; check audio source quality; ensure bass/treble not extreme.

Reset: Unplug unit for 2 minutes, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com