Bose Radio CD Player Instruction Manual

The Bose Radio CD Player is a premium audio system combining AM/FM radio reception with a CD player, featuring Bose waveguide speaker technology for enhanced sound quality, digital tuning with preset stations, CD playback support for audio CDs and CD-R/RW, auxiliary input for external devices, alarm clock functions, sleep timer, remote control, and tone controls. Powered by AC adapter or optional battery backup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose waveguide speaker system, CD player mechanism, AM/FM tuner, LCD display, Remote Control, Auxiliary input jack, Headphone jack, AC power input.

FeatureDescription
Bose Waveguide SpeakerPatented technology for room-filling sound from compact enclosure
CD PlayerPlays standard audio CDs and CD-R/RW discs
AM/FM TunerDigital tuning with 10 station presets (5 AM, 5 FM)
Auxiliary Input3.5mm jack for connecting MP3 players, smartphones, or tablets
Headphone JackFor private listening with standard 3.5mm headphones
Alarm ClockDual alarms with radio or CD wake-up options
Sleep TimerAutomatically turns off system after set time (15-90 minutes)
Remote ControlFull-function remote for all operations
Tone ControlsAdjustable bass and treble settings
Power SourceAC adapter with optional battery backup for alarm memory

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug AC adapter into power outlet and DC jack on back of unit.
  2. Connect antenna: Extend FM wire antenna; position AM loop antenna for best reception.
  3. Connect external devices: Use auxiliary input for MP3 players or other audio sources.
  4. Insert backup batteries (optional): For alarm memory during power outages.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Connect power; system will enter standby mode (display shows time).

  1. Set time: Press and hold CLOCK button, use HOUR and MINUTE buttons to set correct time.
  2. Program radio stations: Tune to desired station, press and hold preset button (1-5) for 2 seconds.
  3. Set alarms: Press ALARM button, select alarm 1 or 2, set time and wake source (radio/CD/buzzer).
  4. Adjust tone: Use BASS and TREBLE buttons to customize sound to your preference.

CAUTION! Use only the supplied AC adapter. Incorrect power supply may damage unit.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, PLAY/PAUSE, STOP, TUNING/BAND, PRESET, ALARM, CLOCK, BASS, TREBLE, VOLUME.

Remote: POWER, Numeric buttons (0-9), CD controls (PLAY, PAUSE, STOP, PREV, NEXT), TUNING, PRESET, ALARM, CLOCK, BASS, TREBLE, VOLUME, MUTE, SLEEP, DISPLAY.

Radio: TUNING for manual station selection; PRESET for stored stations; BAND for AM/FM switching. CD: OPEN/CLOSE to load/eject; PLAY/PAUSE, STOP, PREV/NEXT for track navigation. Audio: BASS and TREBLE adjustments (±10 levels). System: CLOCK for time setting; ALARM for alarm configuration; SLEEP for sleep timer (15-90 min).

Connecting Devices

Auxiliary Input: 3.5mm stereo jack on rear panel. Headphone: 3.5mm jack on front panel.

  1. Turn system to standby mode before connecting devices.
  2. Connect audio cable from external device to AUX IN jack.
  3. Press FUNCTION button to select AUX input mode.
  4. Adjust volume on both system and external device for optimal level.

Tip: For best audio quality, use high-quality shielded audio cables for connections.

Playing CD Media

Supports audio CDs, CD-R, CD-RW (with MP3 playback on some models).

  1. Insert disc: Press CD OPEN/CLOSE, place CD label-side up in tray, press again to close.
  2. Play: Press PLAY; display shows track number and elapsed time.
  3. Skip tracks: Press NEXT or PREV to advance or go back.
  4. Pause: Press PAUSE to temporarily halt playback; press again to resume.
  5. Stop: Press STOP; press again to return to beginning of CD.
  6. Random play: Press RANDOM (if available) to play tracks in random order.
  7. Repeat: Press REPEAT to repeat current track or entire CD.
  8. Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not touch CD surface; handle by edges only. Do not use damaged or warped discs.

Radio Operation

AM/FM reception with digital tuning and preset memory.

  1. Select band: Press BAND to toggle between AM and FM.
  2. Tune manually: Press and hold TUNING up/down buttons to scan; release at desired station.
  3. Auto-scan: Press TUNING briefly to scan to next strong station.
  4. Store presets: Tune to station, press and hold preset button (1-5) for 2 seconds until beep.
  5. Recall presets: Press corresponding preset button (1-5).
  6. Improve reception: Adjust FM wire antenna position; rotate AM loop antenna for best signal.

Note: FM stereo indicator appears when receiving stereo broadcast. In weak signal areas, mono may provide better reception.

Care & Cleaning

Unplug unit before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth slightly with water only.

CAUTION! Never use abrasive cleaners, solvents, or chemicals. Do not allow moisture to enter vents or controls. Clean CD lens only with approved CD lens cleaner if needed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and the Bose waveguide speaker technology are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionEnsure AC adapter is firmly plugged into unit and wall outlet; check power switch.
CD won't playDisc format/damageEnsure disc is audio CD format (not data CD); check for scratches; clean disc.
Poor radio receptionAntenna positionReposition FM wire antenna fully extended; rotate AM loop antenna; move unit location.
No sound from aux inputConnection/input selectionCheck cable connections; ensure FUNCTION is set to AUX; adjust volume on source device.
Remote not workingBatteries/obstructionReplace remote batteries; ensure clear path to IR sensor on front panel; operate within 20 feet.
Alarm not soundingSettings/powerVerify alarm is enabled and set correctly; check backup batteries if power was lost.
Distorted soundSource/volume levelReduce volume; check audio source quality; ensure bass/treble settings are not extreme.

Reset: Unplug unit for 2 minutes, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com/support

Bose Radio CD Player Instruction Manual © - All Rights Reserved 2025