Bose Panaray Digital Controller Manual

The Bose Panaray Digital Controller is a professional audio system controller designed for managing Bose Panaray loudspeaker arrays. It provides digital signal processing, system configuration, zone control, EQ adjustments, and network connectivity for commercial and professional audio installations. Below are key sections for overview, installation, configuration, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Configuration 8. Preset Management 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Controller Unit, Remote Control Panel, Network Interface, Input/Output Connectors, LCD Display.

Feature	Description
Digital Signal Processing	Advanced DSP for speaker management and tuning
Multi-Zone Control	Independent control of up to 8 audio zones
Network Connectivity	Ethernet port for system integration and remote control
LCD Display	Backlit display for system status and settings
Input Connectors	Balanced XLR and line-level inputs
Output Connectors	Balanced outputs for speaker arrays
Power Connector	For AC power connection
Preset Buttons	Quick recall of saved configurations
Menu Navigation	Rotary encoder and buttons for menu control
Power	Turns controller on/off

Installation

Unpack and inspect contents. Mount in standard 19-inch rack or place on stable surface.

Connect power: Use provided power cable to AC outlet.
Connect audio inputs: Use XLR or TRS cables from source devices.
Connect speaker outputs: Use balanced cables to Panaray speaker arrays.
Connect network: Use Ethernet cable for network connectivity.
Connect control panel: Attach remote control panel if included.

WARNING! Ensure proper ventilation; do not block cooling vents. Use appropriate rack mounting hardware.

First-Time Setup

Power on controller; follow initial setup wizard.

System initialization: Press POWER, wait for boot sequence.
Language selection: Choose language in SYSTEM menu (default ENGLISH).
Network configuration: Set IP address (DHCP or static).
Speaker configuration: Select Panaray model and array size.
Input configuration: Assign inputs to zones.
Save configuration: Store as preset 1.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Processor: 32-bit floating-point DSP.
Audio Channels: Up to 8 input channels, 16 output channels.
Frequency Response: 20Hz - 20kHz (±0.5dB).
Dynamic Range: >110dB.
Connections: XLR inputs/outputs, Ethernet, RS-232, GPIO.
Power Requirements: 100-240V AC, 50/60Hz.
Operating Temperature: 0°C to 40°C (32°F to 104°F).
Dimensions: 19" rack mount, 1U height.
Weight: 3.2 kg (7 lbs).

Controls and Settings

Access menu via front panel or remote software. Front Panel: POWER, MENU, ENCODER, PRESET buttons, LCD display.

Remote Software: Bose ControlSpace Designer for configuration.

Audio Processing: EQ (parametric/graphic), Crossover, Delay, Limiter. Zone Control: Volume, Mute, Source selection. System: Network settings, Preset management, Firmware update. Security: Password protection, User access levels.

Connecting Devices

Audio Sources: XLR/TRS to INPUT ports. Speakers: OUTPUT to Panaray arrays. Network: Ethernet to router/switch.

Turn off all devices before connecting.
Use balanced cables for noise reduction.
Connect network for remote management.
Verify connections match configuration.

Tip: Label all cables for easy identification.

Network Configuration

Supports Ethernet control and monitoring.

Connect Ethernet cable to NETWORK port.
Access network menu: MENU > SYSTEM > NETWORK.
Select IP mode: DHCP or Manual.
Enter IP address, subnet, gateway if manual.
Test connection: Ping from computer.
Access web interface: Enter IP in browser.
Configure remote control settings.
Save network configuration.

WARNING! Use proper network security; change default passwords.

Preset Management

Store and recall system configurations.

Save preset: Configure settings, press STORE, select preset number.
Recall preset: Press preset button (1-8) or select from menu.
Edit preset: Recall, make changes, save to same number.
Copy preset: Copy settings between preset slots.
Protect preset: Lock presets from unauthorized changes.

Note: Presets include all DSP and zone settings.

Care & Maintenance

Unplug before cleaning. Use dry, lint-free cloth; avoid liquids.

Maintenance: Keep firmware updated. Backup configurations regularly. Check connections periodically.

CAUTION! Do not open unit; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class A digital device; complies with limits for commercial use. CE marked for European compliance. Copyright © Bose Corporation. All rights reserved. For support, visit www.bose.com/professional or contact Bose Professional Support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cable/outlet	Check power connection; try different outlet; verify power switch.
No audio output	Connections/mute	Check input/output connections; ensure zone not muted; verify source.
Network not connecting	Cable/settings	Check Ethernet cable; verify IP settings; restart router/controller.
Distorted audio	Levels/processing	Check input levels; verify DSP settings; reset to factory defaults.
Preset not recalling	Memory/corruption	Reload preset from backup; reset controller; update firmware.

Factory Reset: Hold MENU while powering on (erases all settings).

Service: Contact Bose Professional Support; authorized service centers only.