Bose On Ear Bluetooth Manual

The Bose On Ear Bluetooth headphones are wireless over-ear headphones featuring Bluetooth connectivity, noise-rejecting dual-microphone system for calls, touch controls, voice prompts for battery status and connection, up to 20 hours of battery life, built-in rechargeable lithium-ion battery, USB-C charging, multipoint connectivity to pair with two devices simultaneously, and Bose SimpleSync technology. Below are key sections for safety, features, setup, operation, care, and troubleshooting.

Features at a Glance

Key components: Headphones with ear cups, USB-C charging cable, carrying case. Main features: Bluetooth wireless, touch controls, voice prompts, multipoint pairing, noise-rejecting microphones.

What's in the Box

Unpack and inspect all contents before use.

1. Bose On Ear Bluetooth headphones
2. USB-C charging cable (approx. 24 inches / 60 cm)
3. Carrying case
4. Quick Start Guide
5. Safety and Compliance leaflet

WARNING! Keep plastic bags away from children to avoid suffocation hazard. Retain packaging for future reference.

First-Time Setup & Charging

Before first use, fully charge the headphones.

1. Connect the USB-C cable to the charging port on the right ear cup.
2. Plug the other end into a USB power source (computer or wall adapter).
3. The LED indicator will glow amber while charging and turn off when fully charged.
4. Initial charge time: approximately 2.5 hours.

CAUTION! Use only the provided USB-C cable or a certified replacement. Do not use damaged cables.

Specifications

• Bluetooth Range: Up to 33 ft (10 m) in open space.
• Supported Codecs: SBC, AAC.
• Frequency Response: Not specified by Bose (proprietary tuning).
• Battery Type: Rechargeable lithium-ion.
• Quick Charge: 15 minutes of charging provides up to 2.5 hours of playback.
• Operating Temperature: 32°F to 104°F (0°C to 40°C).
• Storage Temperature: -4°F to 122°F (-20°C to 50°C).
• Warranty: Limited 1-year warranty from date of purchase.

Controls and Indicators

All controls are located on the right ear cup. Power/Bluetooth button: On the bottom edge. Touch surface: On the outer side of the right ear cup.

Touch Controls: Tap once to play/pause or answer/end call. Swipe up/down for volume. Swipe forward/back for next/previous track. Tap and hold to reject call or activate voice assistant.

LED Indicator: Solid white: Powered on. Blinking blue: Pairing mode. Solid blue: Connected to a device. Amber: Charging. Off: Fully charged or powered off.

Voice Prompts: "Battery high," "Battery medium," "Battery low," "Connected to [device name]," "Power on," "Power off."

Pairing with Devices

Pair with smartphones, tablets, computers, or other Bluetooth audio sources.

1. Turn on headphones by sliding the power switch to the Bluetooth symbol.
2. On your device, enable Bluetooth in settings.
3. Select "Bose On Ear Bluetooth" from the list of available devices.
4. For multipoint pairing: After first connection, pair with a second device the same way; the headphones will manage both connections.

Tip: To enter pairing mode manually, press and hold the Bluetooth button until the LED blinks blue and you hear "Ready to pair."

Using with Phone Calls

The dual-microphone system provides clear voice pickup.

1. Answer call: Tap the touch control once when phone rings.
2. End call: Tap once during the call.
3. Reject call: Press and hold the touch control for 2 seconds.
4. Switch between calls (if supported by phone): Tap once to put current call on hold and answer incoming call.
5. Mute microphone during call: Not available via headphones; use phone's mute function.

WARNING! Do not use headphones in situations where full awareness of surroundings is required (e.g., driving, cycling).

Voice Assistant Support

Works with Siri (iOS), Google Assistant (Android), and Alexa (via Bose Music app).

To activate: Press and hold the touch control until you hear a tone, then speak your command. Release to send.

Note: Voice assistant functionality depends on your device settings and app installation.

Care & Cleaning

Unplug charging cable before cleaning. Use a soft, dry cloth to wipe exterior surfaces.

For ear cushions: Gently wipe with a cloth slightly dampened with water and mild soap. Do not immerse in water. Allow to dry completely before use.

CAUTION! Do not use solvents, abrasives, or compressed air. Keep away from extreme heat and moisture.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. IC: Complies with Industry Canada license-exempt RSS standard(s). Contains FCC ID: XXXXXXXXX and IC: XXXXXXXXX. Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Copyright © 2023 Bose Corporation. All rights reserved. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Reset: Turn off headphones. Press and hold the Bluetooth button for 10 seconds until LED flashes white 3 times. This clears paired devices list.

Service: 1-800-999-2673; www.bose.com/support