Bose Music Wave System Manual

The Bose Music Wave System is a premium audio system combining a CD player, AM/FM tuner, and advanced waveguide speaker technology for rich, room-filling sound. It features a sleek design, remote control, alarm functions, preset stations, and auxiliary input for connecting external devices. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Alarm & Timer Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waveguide speaker system, CD player, AM/FM tuner, Remote Control, Auxiliary input jack, Headphone jack, AC power input.

FeatureDescription
Waveguide Speaker TechnologyDelivers full, natural sound from a compact system
CD PlayerPlays audio CDs, CD-R/RW discs
AM/FM TunerWith 6 preset stations (3 AM, 3 FM)
Remote ControlFull-function remote for all operations
Auxiliary Input3.5mm jack for connecting MP3 players, smartphones, etc.
Headphone JackFor private listening
Alarm FunctionsDual alarms with CD or radio wake-up
Sleep TimerAutomatically turns system off after set time
Display DimmerAdjusts display brightness for day/night
AC Power InputFor main power connection

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug AC power cord into wall outlet (120V, 60Hz).
  2. Connect antenna: Attach AM loop antenna and FM wire antenna for radio reception.
  3. Connect auxiliary device: Use 3.5mm audio cable to connect external device to AUX IN jack.
  4. Insert batteries into remote control (2 AA batteries).

WARNING! Do not place near heat vents, radiators, or in direct sunlight. Ensure proper ventilation around the unit.

First-Time Setup

Power on system; follow initial setup procedure.

  1. Set clock: Press and hold CLOCK button, use HOUR/MINUTE buttons to set time.
  2. Tune radio stations: Press TUNER button, use TUNING buttons to find station, press and hold PRESET to save.
  3. Adjust sound: Use BASS and TREBLE controls to customize audio.
  4. Set display brightness: Press DIMMER button to cycle through brightness levels.

CAUTION! Place system on stable surface; avoid locations with excessive vibration.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, PLAY/PAUSE, STOP, TUNER, ALARM, DIMMER, BASS, TREBLE.

Remote: POWER, Numeric buttons (1-6 for presets), CD controls (PLAY, PAUSE, STOP, SKIP), VOLUME, MUTE, TUNER, ALARM SET, SLEEP, CLOCK SET.

Audio Controls: BASS (-/+), TREBLE (-/+), VOLUME. Tuner: TUNING (+/-), PRESET (1-6), BAND (AM/FM). CD: PLAY/PAUSE, STOP, SKIP (PREV/NEXT), REPEAT, RANDOM. Alarm: ALARM 1/2, WAKE TO (CD/RADIO/BUZZER), SNOOZE. System: CLOCK SET, DIMMER (display brightness), SLEEP TIMER.

Connecting Devices

Auxiliary Input: 3.5mm jack for external audio sources. Headphone: 3.5mm jack for private listening.

  1. Turn system volume to minimum before connecting devices.
  2. Connect 3.5mm audio cable from device headphone output to AUX IN jack.
  3. Press AUX button to select auxiliary input mode.
  4. Adjust volume on both system and connected device.

Tip: For best sound quality, use high-quality audio cables and ensure connections are secure.

Playing CD Media

Supports audio CDs, CD-R, CD-RW discs.

  1. Insert disc: Press CD OPEN/CLOSE, place CD label-side up in tray.
  2. Play: Press PLAY; system reads TOC then begins playback.
  3. Skip tracks: Press NEXT or PREVIOUS to skip forward/back.
  4. Pause: Press PLAY/PAUSE to pause; press again to resume.
  5. Stop: Press STOP once to stop playback; press again to clear memory.
  6. Repeat: Press REPEAT to repeat current track or entire disc.
  7. Random: Press RANDOM to play tracks in random order.
  8. Eject: Press CD OPEN/CLOSE to eject disc.

WARNING! Do not touch CD laser lens. Keep discs clean and free of scratches.

Alarm & Timer Functions

Dual Alarms: Set separate times for ALARM 1 and ALARM 2. Wake Options: CD, radio (preset station), or buzzer. Snooze: 9-minute snooze function. Sleep Timer: Turns system off after 10-90 minutes.

  1. Set alarm: Press and hold ALARM 1 or 2, set time with HOUR/MINUTE.
  2. Choose wake source: Press WAKE TO to cycle through CD/RADIO/BUZZER.
  3. Activate: Alarm icon appears when alarm is set.
  4. Snooze: Press SNOOZE or any button during alarm.
  5. Sleep timer: Press SLEEP repeatedly to set duration (10-90 min).

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. CD lens cleaner can be used periodically.

CAUTION! Do not use solvents, chemicals, or abrasive cleaners. Never spray liquids directly on unit.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose and the Bose wave guide are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedCheck AC power connection; ensure outlet is working.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor.
CD won't playDisc dirty/damagedClean disc with soft cloth; check for scratches.
Poor radio receptionAntenna not connectedEnsure AM loop and FM wire antennas are properly connected.
No sound from AUXWrong input selectedPress AUX button; check volume on connected device.
Alarm not soundingAlarm not set/volume lowVerify alarm is set; check alarm volume setting.
Distorted soundSource quality/volume too highReduce volume; check audio source quality.

Reset: Unplug unit for 60 seconds, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com

Bose Music Wave System Manual © - All Rights Reserved 2025