Bose Music Monitor Manual

The Bose Music Monitor is a premium compact speaker system designed for high-fidelity audio reproduction in small to medium-sized rooms. It features proprietary Bose waveguide technology, digital signal processing, multiple input options, remote control capability, and advanced acoustic tuning. Below are key sections covering safety, features, setup, operation, connectivity, and troubleshooting.

1. Features at a Glance 2. Unpacking and Contents 3. System Setup 4. Technical Specifications 5. Controls and Indicators 6. Connecting Audio Sources 7. Remote Control Operation 8. Advanced Settings 9. Care & Maintenance 10. Regulatory & Compliance 11. Troubleshooting

Features at a Glance

Key components: Left and Right speaker units, Remote Control, Power adapter, Audio cables (3.5mm and RCA), User manual.

Feature	Description
Waveguide Speaker Technology	Proprietary design for full-range sound from compact enclosures
Digital Signal Processing (DSP)	Optimizes audio performance for different content types
Multiple Inputs	3.5mm AUX, RCA stereo, Optical digital input
Remote Control	Power, volume, input selection, mute, preset buttons
Status Indicator LED	Shows power status and selected input source
Auto Wake/Sleep	Automatically powers on with audio signal; enters standby after inactivity
Acoustic Tuning Port	Enhanced bass response without distortion
Magnetic Shielding	Allows placement near video displays without interference
Wall Mount Compatible	Keyhole slots for secure wall mounting (brackets sold separately)
Universal Power Supply	100-240V AC, 50/60Hz for worldwide use

Unpacking and Contents

Carefully unpack and verify all components are present.

Left Speaker Unit (primary, with controls)
Right Speaker Unit (satellite)
Remote Control (with CR2032 battery pre-installed)
AC Power Adapter and cord
3.5mm to 3.5mm stereo audio cable (6 ft / 1.8 m)
RCA to 3.5mm stereo audio cable (6 ft / 1.8 m)
Quick Start Guide and Safety Information
Warranty Registration Card

WARNING! Inspect for shipping damage before use. Do not use if any component appears damaged.

System Setup

Position speakers and connect power and audio sources.

Place speakers: Position left and right speakers at least 6 feet apart for optimal stereo imaging. Ensure they are on stable, level surfaces.
Connect speaker cable: Attach the proprietary cable between Left (output) and Right (input) speaker connectors.
Connect power: Plug AC adapter into Left Speaker, then into wall outlet.
Connect audio source: Use appropriate cable (3.5mm, RCA, or optical) from your source device to corresponding input on Left Speaker.
Power on: Press POWER button on Left Speaker or remote. LED will illuminate solid white.

CAUTION! Ensure adequate ventilation around speakers. Do not block rear ports.

Technical Specifications

Speaker Drivers: Custom-designed full-range drivers with neodymium magnets
Frequency Response: 48 Hz – 20 kHz (±3 dB)
Amplifier Power: 50 watts total (25W per channel)
Inputs: 3.5mm analog, RCA stereo analog, TOSLINK optical digital
Input Impedance: 10 kΩ (analog inputs)
Signal-to-Noise Ratio: >85 dB
Dimensions (each speaker): 7.5" H × 4.5" W × 5.75" D (19 × 11.4 × 14.6 cm)
Weight (each speaker): 3.3 lbs (1.5 kg)
Power Requirements: 100-240V AC, 50/60Hz, 1.5A max
Operating Temperature: 41°F to 95°F (5°C to 35°C)

Controls and Indicators

Left Speaker Front: POWER button, INPUT SELECT button, STATUS LED. Rear: Input jacks, Speaker output, Power input.

Remote: POWER, VOLUME UP/DOWN, MUTE, INPUT SELECT (cycles through AUX, RCA, OPTICAL), PRESET 1-4 (for saved EQ settings).

LED Indicators: Solid white = Power on; Blinking white = Auto-sleep mode active; Amber = Muted; Blinking amber = Error/over-temperature condition.

Connecting Audio Sources

Supports multiple audio sources simultaneously; select active input via button or remote.

Smartphone/Tablet/MP3 Player: Use 3.5mm to 3.5mm cable from device headphone jack to AUX input.
TV/Set-top Box: Use RCA cables (red/white) from audio outputs to RCA inputs, or optical cable from digital audio output to OPTICAL input.
Computer/Laptop: Use 3.5mm to 3.5mm cable from computer audio output to AUX input.
Turntable (with preamp): Use RCA cables from preamp outputs to RCA inputs.

Tip: For best audio quality with digital sources, use the optical input. Ensure TV audio output is set to PCM stereo.

Remote Control Operation

Remote requires line-of-sight to Left Speaker's IR sensor (located on front panel).

Power: Turns system on/off.
Volume: Adjusts output level in 1 dB steps.
Mute: Temporarily silences audio; press again or adjust volume to unmute.
Input Select: Cycles through connected sources in this order: AUX → RCA → OPTICAL.
Presets: Hold PRESET 1-4 for 3 seconds while playing audio to save current tone settings. Press briefly to recall saved setting.

Battery: CR2032 lithium cell (included). Replace when remote operation becomes inconsistent.

Advanced Settings

No user-accessible menu system. All audio processing is automatic. Customization available through remote presets only.

To reset to factory defaults: Unplug power from Left Speaker. Press and hold POWER button on speaker while reconnecting power. Continue holding for 10 seconds after power is restored. Release when LED flashes amber three times.

Care & Maintenance

Unplug power before cleaning. Use soft, dry cloth only for exterior surfaces. For stubborn stains, lightly dampen cloth with water only. Do not use solvents, abrasives, or aerosol sprays.

CAUTION! Never allow moisture to enter ports or openings. Do not place liquids on or near speakers.

Regulatory & Compliance

FCC Part 15 Class B compliant. CE marked. RoHS compliant. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Contains FCC ID: XXXXXXXXXXX. For full regulatory information, visit www.bose.com/compliance. Bose and the Bose logo are registered trademarks of Bose Corporation. Copyright © 2025 Bose Corporation. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power / No LED	Power connection	Ensure power adapter is firmly connected to speaker and wall outlet. Try different outlet.
No sound from one speaker	Speaker cable connection	Check cable between Left and Right speakers is secure at both ends.
Distorted audio	Source volume too high	Reduce volume on source device; adjust volume primarily using speaker remote.
Remote not working	Battery/obstructions	Replace CR2032 battery; ensure clear line-of-sight to Left Speaker front panel.
Intermittent sound dropout	Loose cables/auto sleep	Check all audio connections; disable auto-sleep by ensuring constant audio signal.
Hum or buzz	Ground loop/interference	Try different power outlet; ensure audio cables are away from power cords; use optical input if available.

Reset: Perform factory reset as described in Advanced Settings section.

Service: For warranty service or technical support, contact Bose Customer Service: 1-800-999-2673 (US) or visit www.bose.com/support.