Bose Model 101 MusicMonitor Manual

The Bose Model 101 MusicMonitor is a compact, high-performance speaker system designed for critical music listening. It features a proprietary waveguide speaker technology for wide, accurate sound dispersion, a built-in amplifier, line-level RCA inputs, a headphone jack, volume control, and a sleek, space-saving design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Proprietary waveguide speaker, Built-in amplifier, Volume control knob, RCA line-level inputs, Headphone output jack, Power connector.

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Position speakers: Place left and right speakers at ear level, angled slightly inward toward listening position.
2. Connect audio source: Use RCA cables to connect source device (e.g., CD player, computer audio output) to RCA inputs on speaker.
3. Connect power: Plug AC power adapter into power connector and wall outlet.

WARNING! Ensure adequate ventilation; do not block rear ports. Keep away from heat sources and moisture.

First-Time Setup

Power on speaker; adjust settings for optimal listening.

1. Power on: Press power button or connect power adapter; LED should illuminate.
2. Set volume: Start with volume knob at minimum, then gradually increase to desired level.
3. Connect audio source: Ensure source device is powered on and outputting audio signal.
4. Positioning: Fine-tune speaker placement for best stereo imaging.

CAUTION! Avoid placing speakers near strong magnetic fields or electronic interference.

Specifications

• Speaker Type: 2-way, waveguide design.
• Amplifier Power: Integrated (specific wattage per channel).
• Frequency Response: Optimized for accurate music reproduction.
• Inputs: Stereo RCA line-level.
• Outputs: Headphone jack (3.5mm).
• Controls: Volume knob, power.
• Power Source: AC power adapter (included).
• Dimensions: Compact, space-saving design.
• Weight: Lightweight for easy placement.

Controls and Settings

Physical controls located on speaker front or side panel.

Front/Side Panel: Power button, Volume knob.

Volume Control: Rotate knob clockwise to increase volume, counterclockwise to decrease. Start at low volume when powering on.

Headphone Jack: Plugging in headphones automatically mutes speaker output.

Power Indicator: LED shows power status (steady on = powered, off = standby/unpowered).

Connecting Devices

RCA Inputs: For line-level audio sources. Headphone Jack: For private listening.

1. Turn off speaker and audio source before connecting.
2. Use quality RCA cables to connect source output to speaker inputs (left to left, right to right).
3. For computer connection, may require 3.5mm to RCA adapter cable.
4. Plug headphones into headphone jack for private listening.

Tip: Ensure cables are fully inserted and not bent sharply.

Operation & Listening Modes

Designed for critical music listening across various genres.

1. Power on: Press power button; LED illuminates.
2. Adjust volume: Set to comfortable listening level.
3. Select source: Ensure audio source is playing.
4. Headphone use: Plugging in headphones mutes speakers automatically.
5. Optimal placement: Position speakers at ear level, angled inward for best stereo image.

WARNING! Do not exceed maximum volume for extended periods to avoid hearing damage.

Care & Cleaning

Unplug power before cleaning. Use soft, dry cloth only; do not use liquids or abrasive cleaners.

CAUTION! Do not allow moisture to enter ports or openings. Keep away from dust and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose customer service.

Troubleshooting

Reset: Power cycle (unplug, wait 30 seconds, replug).

Service: Contact Bose customer service; www.bose.com