Bose Link for Wave III Manual

The Bose Link for Wave III is a connectivity system designed to integrate your Wave III music system with other Bose products and audio sources. It enables multi-room audio, external source connection, and system expansion. Below are key sections for overview, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Modes 8. System Integration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose Link connector port, Remote Control, Audio input/output ports, Power adapter.

Feature	Description
Bose Link port	For connecting to other Bose Link-compatible products
AUDIO IN jack	For external audio source connection (e.g., smartphone, tablet)
AUDIO OUT jack	For connecting to external speakers or amplifiers
Power adapter port	For power connection
LINK button	Activates Bose Link connection mode
SOURCE button	Switches between audio input sources
POWER	Turns system on/off
VOLUME +/-	Adjusts audio output level
MUTE	Mutes sound temporarily
STATUS LED	Indicates connection and power status

Installation

Unpack and inspect contents. Place on stable surface near Wave III system.

Connect to Wave III: Use provided Bose Link cable to connect Link port to Wave III.
Connect external audio source: Use 3.5mm audio cable to connect device to AUDIO IN jack.
Connect to other Bose products: Use Bose Link cable to daisy-chain compatible systems.
Plug power adapter into outlet and Bose Link unit.

WARNING! Ensure all connections are secure before powering on. Use only Bose-approved cables.

First-Time Setup

Power on Wave III and Bose Link unit; follow setup procedure.

Establish Link connection: Press LINK button on Bose Link unit and Wave III remote.
Select source: Press SOURCE button to cycle through inputs (Wave III, External, Other Bose).
Configure multi-room: In linked systems, assign rooms via Bose remote or app if supported.
Adjust audio settings: Use Wave III remote for tone and balance adjustments.

CAUTION! Place unit in well-ventilated area; avoid heat sources and moisture.

Specifications

Compatibility: Bose Wave III music system and Bose Link-enabled products.
Audio Input: 3.5mm stereo jack.
Audio Output: Bose Link proprietary connector.
Power Source: 12V DC power adapter (included).
Operating Range: Up to 50 feet between linked products (varies by environment).
Supported Formats: Analog audio; digital via compatible Bose products.
Operating Temp: 32°F to 95°F (0°C to 35°C).
Dimensions: Compact design (exact measurements in included guide).

Controls and Settings

Access controls via physical buttons or Wave III remote. Front Panel: POWER, LINK, SOURCE, STATUS LED.

Remote Integration: Use Wave III remote to control linked audio sources and volume.

Source Selection: Cycle through connected inputs. Link Management: Press LINK to add/remove products from network. Audio Sync: Adjust delay for multi-room synchronization via remote if supported. Reset: Hold LINK and SOURCE for 10 seconds to reset network settings.

Connecting Devices

External Audio: 3.5mm to AUDIO IN. Other Bose Products: Bose Link cable between units.

Turn off all devices before connecting.
Match cables to correct ports (Bose Link to Bose Link).
Power on devices; press LINK to establish connection.
Select source via SOURCE button or remote.

Tip: Use high-quality audio cables for best performance. Ensure firmware is up to date.

Operation Modes

Supports standalone and multi-room operation.

Standalone mode: Bose Link connects Wave III to external audio source only.
Multi-room mode: Link multiple Bose systems for synchronized audio throughout home.
Source switching: Press SOURCE to toggle between Wave III radio/CD and external input.
Volume control: Master volume adjusts all linked rooms; individual room control if supported.
Mute: Press MUTE on remote to silence audio temporarily.

WARNING! Do not connect non-Bose products to Bose Link port. May cause damage.

System Integration

Multi-Room Audio: Create zones by linking Bose products. Source Sharing: Play same audio source across all linked rooms. Individual Control: Adjust volume per room if system supports.

Care & Maintenance

Unplug before cleaning. Use dry, soft cloth; avoid liquids and abrasive cleaners.

CAUTION! Do not disassemble unit. Refer service to authorized Bose technicians.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; trademarks owned by Bose Corporation. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No audio from linked system	Connection loose	Check Bose Link cables; re-seat connections; power cycle units.
External source not detected	Input selection	Press SOURCE to correct input; check audio cable connection.
STATUS LED not lit	Power issue	Ensure power adapter plugged in; try different outlet.
Multi-room sync issues	Distance/interference	Reduce distance between units; avoid wireless interference.
Remote not controlling link	Remote setup	Re-pair remote to Wave III; replace remote batteries.

Reset: Hold LINK and SOURCE for 10 seconds to reset network settings.

Service: 1-800-999-2673; www.bose.com/support