Bose Lifestyle 50 System Manual

The Bose Lifestyle 50 System is a premium home theater and music system featuring a central media console, Acoustimass module for deep bass, five cube satellite speakers, a universal remote control, AM/FM tuner, and support for multiple audio/video sources. It includes ADAPTiQ audio calibration, video upscaling, multi-room audio capability, and advanced audio processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. System Operation 8. ADAPTiQ Calibration 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Media Console, Acoustimass Module, Five Cube Satellite Speakers, Universal Remote Control, ADAPTiQ Headset, Power Cords, and Connection Cables.

FeatureDescription
Media ConsoleCentral control unit with amplifier, tuner, and source inputs
Acoustimass ModuleHandles low-frequency effects and deep bass
Cube Satellite SpeakersFive small speakers for front, center, and surround channels
Universal RemoteControls system, TV, and other connected components
ADAPTiQ Audio CalibrationAutomatically adjusts sound to room acoustics
Video UpscalingEnhances video signals to higher resolutions
Multi-room AudioExtends audio to additional rooms (with optional equipment)
AM/FM TunerBuilt-in radio with preset memory
Source InputsHDMI, Component Video, Composite Video, Optical Audio, Analog Audio
Sleep TimerAutomatically turns system off after set time

Installation

Unpack and inspect all components. Choose optimal location for media console and speakers.

  1. Position Media Console: Place near TV and other source components with adequate ventilation.
  2. Place Acoustimass Module: Position along a wall or in a corner for optimal bass response.
  3. Mount Satellite Speakers: Install front left/right, center, and surround left/right speakers.
  4. Connect Speakers: Run included cables from media console to each speaker and bass module.
  5. Connect Source Devices: Use appropriate cables (HDMI, optical, etc.) to connect TV, Blu-ray, cable box, etc.
  6. Connect Power: Plug media console and Acoustimass module into AC outlets.

WARNING! Ensure all power is off during connections. Do not block ventilation openings on media console.

First-Time Setup

Power on the system; follow on-screen prompts if connected to a TV.

  1. Initial Power On: Press POWER on media console or remote. System will enter standby mode.
  2. Connect to Display: Ensure TV is on and set to correct input (HDMI or video input connected to console).
  3. Run ADAPTiQ Calibration: Put on ADAPTiQ headset, press SETUP on remote, and follow audio tones to calibrate room acoustics.
  4. Set Clock and Tuner: Use on-screen menu to set time and auto-scan for FM/AM radio stations.
  5. Configure Sources: Assign names to connected devices (e.g., "Cable", "Blu-ray") for easy selection.
  6. Test Audio/Video: Play content from each source to verify connections and sound.

CAUTION! Handle cube speakers and ADAPTiQ headset with care. Keep remote away from moisture.

Specifications

Controls and Settings

Access menu system via remote control. Media Console Front Panel: POWER, SOURCE, VOLUME knob, HEADPHONE jack.

Remote: POWER, Numeric buttons, SOURCE SELECT, VOLUME, MUTE, MENU, NAVIGATION arrows, ENTER, SETUP, SOUND TOUCH buttons, SLEEP.

Audio Settings: Bass, Treble, Dialogue Mode, Night Mode, Speaker Levels (individual channel adjustment). Video Settings: Output Resolution, Aspect Ratio, HDMI Control (CEC). System Settings: Clock, Tuner Presets, Remote Control Setup (program for other devices), Factory Reset. ADAPTiQ: Run calibration, view results.

Connecting Devices

HDMI: Recommended for best audio/video quality. Optical/Coaxial Digital: For audio from TVs or older devices. Analog Audio: For legacy components.

  1. Turn off all devices before making connections.
  2. Connect source device (Blu-ray, game console) to an available input on media console (e.g., HDMI 1).
  3. Connect media console video output (HDMI OUT) to an input on your TV.
  4. Power on devices. Select the corresponding source on the Lifestyle system (e.g., press "DVD" button if connected to HDMI 1).

Tip: Use high-speed HDMI cables for 1080p video and advanced audio formats. Label cables for easy identification.

System Operation

Daily use for movies, music, and TV.

  1. Power On: Press POWER on remote or console. Select source (TV, Blu-ray, Music).
  2. Volume Control: Use VOLUME buttons or knob. Press MUTE for instant silence.
  3. Sound Modes: Press SOUND button to cycle through presets (Movie, Music, Night).
  4. Using the Tuner: Press TUNER source. Use number keys for presets or arrows to tune.
  5. Multi-room (if equipped): Press ROOM 2 or ROOM 3 to send audio to additional zones.
  6. Sleep Timer: Press SLEEP repeatedly to set auto-off time (30, 60, 90 min).
  7. Headphone Use: Plug headphones into front jack; speakers mute automatically.

WARNING! Do not operate with cover removed. Keep liquids away from electronics.

ADAPTiQ Calibration

Critical for optimal sound. Re-run if furniture changes or speakers are moved.

  1. Ensure quiet room. Put on ADAPTiQ headset and plug into media console front jack.
  2. Press SETUP on remote, navigate to "ADAPTiQ Calibration," press ENTER.
  3. Follow voice prompts. Sit in primary listening position during measurement tones.
  4. System will play test tones from each speaker. Remain still and quiet.
  5. Process repeats for up to 5 additional listening positions if desired.
  6. System saves calibration settings. Store headset for future use.

Note: Calibration tailors system response to your room's unique size, shape, and furnishings.

Care & Cleaning

Unplug system before cleaning. Use soft, dry cloth for media console and speakers.

Cube Speakers & Grilles: Use soft brush or vacuum with soft brush attachment for dust. Do not use chemicals or water.

Remote Control: Wipe with slightly damp cloth. Replace batteries when weak.

CAUTION! Do not use abrasive cleaners or solvents. Never spray liquids directly onto any component.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. ICES-003 Compliance: Class B digital apparatus. Copyright © Bose Corporation. Bose, Lifestyle, Acoustimass, ADAPTiQ, and Cube are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord, outletEnsure power cord is securely connected. Try a different outlet. Check circuit breaker.
No sound from speakersVolume, mute, connectionsCheck volume level. Ensure MUTE is off. Verify speaker wire connections are secure at both ends.
No pictureTV input, HDMI cableEnsure TV is set to correct input source. Try reseating HDMI cable. Test with a different cable.
Remote not workingBatteries, obstacles, sensorReplace batteries. Ensure clear path to media console IR sensor. Re-program remote if needed.
Poor sound qualityCalibration, source qualityRe-run ADAPTiQ calibration. Check audio settings (Night Mode on?). Verify source material quality.
No bassAcoustimass module power, cableEnsure bass module is plugged in and power light is on. Check connection cable from media console.
System won't respondSoftware lock-upUnplug media console from power for 60 seconds, then plug back in to reboot.

Reset: Menu > System Settings > Factory Reset (will erase all custom settings).

Service: 1-800-999-2673; www.bose.com/support

Bose Lifestyle 50 System Manual © - All Rights Reserved 2025